Cambria Whitney quartz typically costs about $75-$150 per square foot for the material and $110-$200 per square foot installed, depending on the fabricator, layout, edge details, and local labor rates. A standard kitchen countertop project often totals $3,500-$8,000, with larger kitchens, full-height backsplashes, or complex seams costing more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Whitney quartz material | $75/sq ft | $105/sq ft | $150/sq ft | Installed quotes may bundle material and fabrication |
| Fabricated and installed countertop | $110/sq ft | $150/sq ft | $200/sq ft | Standard residential layout and ordinary access |
| Typical kitchen project | $3,500 | $5,500 | $8,000 | About 30-40 sq ft, excluding major cabinet work |
| Full-height backsplash | $70/sq ft | $110/sq ft | $160/sq ft | Additional material, cutting, and installation |
What Whitney quartz costs for a kitchen countertop
For budgeting, a useful installed range for Cambria Whitney is $110-$200 per square foot. A 30-square-foot countertop could therefore run roughly $3,300-$6,000 before add-ons; a 40-square-foot layout could reach $4,400-$8,000. These estimates assume standard thickness, typical cutouts, professional templating, and installation by a local stone fabricator.
Whitney is a named Cambria design, and actual availability and slab pricing depend on the dealer and fabricator. Retailers may quote a single installed rate or separate the slab, fabrication, and labor. For a realistic comparison, use the same measured square footage and included work when reviewing quotes.
Material-only pricing is less useful unless the buyer already has a fabricator. A slab may be priced by the slab rather than by usable square foot, and the amount left over after cutting can affect the effective material cost. Ask whether the quote includes the full slab, remnants, and any minimum purchase requirement.
Assumptions: U.S. residential kitchen, standard access, typical 1.25-inch countertop profile, and no unusual structural or cabinet repairs.
How slab, cutout, and edge charges appear in quotes
A countertop estimate may combine several tasks into one per-square-foot rate. When it is itemized, the distinction between stone, shop work, and installation makes it easier to spot exclusions and compare the Whitney price with another Cambria design.
| Quote component | Typical range | Pricing basis | Common scope |
|---|---|---|---|
| Quartz material | $75-$150 | Per sq ft | Whitney slab allocation and color selection |
| Template and fabrication | $20-$45 | Per sq ft | Measurement, cutting, polishing, and seam preparation |
| Installation labor | $15-$35 | Per sq ft | Placement, leveling, seams, and standard fitting |
| Sink or cooktop cutout | $150-$350 | Per opening | Cutting and finishing a typical opening |
| Old countertop removal | $5-$15 | Per sq ft | Removal and basic disposal; plumbing work may be extra |
| Delivery and access | $150-$600 | Per project | Local delivery, stairs, long carries, or difficult access |
Prices vary by shop and region, and some fabricators include templating, delivery, and installation in their square-foot rate. A sink cutout, faucet holes, or cooktop opening can be charged separately. Confirm whether removal, disposal, sink support, plumbing reconnection, and sales tax are included before comparing totals.
Labor estimates often reflect more than time spent in the home. Shop fabrication includes measuring, moving the slab, cutting, and polishing, while installers may need a separate trip for templating. A crew rate of $75-$125 per hour may help explain a line item, but many shops price the job by area and task rather than by hourly billing.
Why square footage and slab layout change the Whitney estimate
Countertop area is the starting point, but the slab yield matters too. A simple 30-square-foot kitchen with straight runs may use material efficiently; the same area split among an island, narrow returns, and several short sections can require more cutting and produce more waste. Large or unusually shaped islands may also need additional handling or a seam.
Edge selection changes the shop work. A standard eased edge is often included or costs little, while a decorative profile may add about $10-$30 per linear foot. A waterfall side, where stone continues down the cabinet end, can add $800-$2,000 or more per side because it uses extra material and careful mitered fabrication.
Cutouts and thickness affect the final number as well. One standard sink opening may cost $150-$350; undermount sinks may require additional edge polishing. A thicker-looking edge built from a laminated strip can add roughly $20-$50 per linear foot. Ask the fabricator to show the slab layout, seams, edge profile, and cutouts on the written estimate.
For a typical kitchen, 25-35 square feet is a modest run, 35-50 square feet is a larger kitchen, and more than 50 square feet often signals a large layout or substantial island. These ranges are only planning benchmarks: cabinets, overhangs, and backsplashes can change the measured area substantially.
How much installation time and crew labor add
Most countertop projects take more than one visit. Templating commonly takes 1-2 hours on site, followed by several days for fabrication, then about 3-6 hours for a standard installation. A larger kitchen, heavy island, difficult stair access, or multiple seams can require a larger crew or a longer installation window.
In-home installation may involve a two- or three-person crew, particularly when large pieces must be carried and set safely. Labor and handling are generally reflected in the installed price, but a quote may separate them as $15-$35 per square foot or charge a project minimum. A small vanity can therefore have a higher per-square-foot rate than a full kitchen.
Schedule and access can influence labor charges. Stairs, narrow doorways, long distances from the truck, or limited parking may add $100-$500 or more, depending on the site. If cabinets need leveling or reinforcement, carpentry may be an additional $200-$800. Have the installer inspect access and cabinet condition before accepting a fixed quote.
How Whitney quartz prices differ across U.S. regions
Local rates often vary more than the stone’s name suggests. In lower-cost markets with nearby fabrication shops, a standard installed Whitney project may fall near $110-$150 per square foot. In major metro areas or high-cost coastal markets, comparable work can reach $150-$200 per square foot, roughly 15%-30% above a lower-cost-market quote.
Rural projects may have fewer fabricators to compare and higher delivery charges, even when labor rates are lower. A long-distance trip can add $100-$600 or more, especially for remote homes or difficult delivery access. Large cities may offer more quote options but can also charge more for labor, parking, and scheduling.
Use these regional differences as a screening estimate, not a fixed rule. A local shop that has Whitney in stock may beat a lower hourly-rate competitor that must source and transport a slab. Compare at least three local estimates that include the same scope, material grade, edge, cutouts, and removal work.
Whitney quartz compared with other countertop choices
Cambria is positioned as a premium quartz surface, so Whitney may cost more than entry-level engineered quartz. Common installed quartz ranges are about $60-$150 per square foot, with brand, color, slab availability, and fabrication complexity driving the spread. A lower-priced alternative may look similar from a distance but differ in pattern, warranty, or dealer availability.
Granite is often priced around $60-$150 per square foot installed, although rare stones can exceed that range. It is a natural material with more variation between slabs, so buyers should inspect the exact piece. Laminate is a lower-cost option, commonly about $20-$60 per square foot installed, but it does not offer the same stone-like appearance or heat tolerance and can be harder to repair cleanly if damaged.
Repair may be more economical than replacement when only one area is damaged, but quartz chip or seam repairs can cost about $200-$600 and may remain visible. Replacing the full surface makes sense when damage is extensive or the layout is changing, but cabinet modifications and plumbing can increase the project total. Compare total installed cost and desired lifespan rather than material price alone.
Ways to lower a Whitney countertop quote without changing the design
Keep the countertop footprint straightforward where possible. Fewer short runs and fewer seams can reduce fabrication time and improve slab yield. A standard eased edge, conventional overhang, and one sink cutout are usually less expensive than decorative edges, waterfall panels, or multiple custom openings.
Ask whether an available slab or remnant can cover a small vanity, laundry counter, or other secondary surface. A remnant may reduce material expense, but it must match the project dimensions and pattern orientation. For a full kitchen, verify whether the supplier requires purchase of an entire slab and whether unused material belongs to the buyer.
Remove an old countertop only if the contractor allows customer removal and the cabinets can be protected; damaging cabinets can erase the savings. Bundle multiple surfaces into one project when the shop can fabricate them together, and avoid paying for upgrades that do not affect the intended look or function. Request a base quote and separate prices for optional edges, backsplash, and waterfall work.
Timing can help when a fabricator has an open production slot or a suitable slab already in inventory. However, rush scheduling may add fees, and waiting for a particular slab can create storage or delivery charges. A written estimate should state the quote’s expiration date, deposit, balance due, cancellation terms, and what happens if the slab is unavailable.
Three Whitney kitchen estimates with different specifications
A compact 25-square-foot kitchen with straight runs, a standard edge, and one sink cutout might cost $2,900-$4,250 installed. At an illustrative $116-$170 per square foot, the total includes basic fabrication and installation but excludes removal, plumbing, and tax. This scenario assumes easy access and no island.
A 36-square-foot kitchen with a standard island, two cutouts, and a few seams could run $4,500-$6,800. A blended rate of roughly $125-$189 per square foot reflects more fabrication and handling than a simple run. If the island requires a waterfall end, add approximately $800-$2,000 for the extra material and mitered work.
A 50-square-foot kitchen with an island, upgraded edge, old-countertop removal, and a full-height backsplash may total $7,000-$11,000. The higher range accounts for more stone, additional polishing, demolition, and backsplash installation. These examples are planning estimates rather than Cambria list prices; local measurements and slab selection determine the final quote.
Use each example as a scope check, then replace the assumed area and extras with the fabricator’s measured layout. A quote far outside these ranges may still be reasonable if it includes premium edge work, extensive backsplash coverage, structural changes, difficult delivery, or local high-cost labor.
What to verify before paying a Cambria Whitney deposit
Before placing a deposit, confirm the exact Whitney color and slab selection, the thickness, edge profile, measured square footage, seam locations, and cutout details. Ask whether the quote covers templating, fabrication, delivery, installation, removal, disposal, and taxes. The written scope should identify who reconnects the sink and cooktop and whether those trades are included.
Check the fabricator’s timeline and payment terms, including the deposit percentage and final payment milestone. Verify the warranty source and what it covers; a product warranty does not necessarily cover poor installation, cabinet movement, or damage caused by misuse. Ask how the shop handles a slab defect or a measurement problem discovered after fabrication.
For a fair comparison, gather estimates using the same dimensions and specifications rather than comparing per-square-foot rates alone. The most useful bid is the one that clearly accounts for every piece of stone, labor task, and project exclusion.