Cambridge 6×9 pavers typically cost about $5-$10 per square foot for materials and $16-$30 per square foot installed, with smaller or complex jobs often costing more per square foot. The Cambridge 6×9 pavers price depends on the product line, color, project size, base condition, pattern, delivery distance, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cambridge 6×9 pavers | $5 per sq ft | $7.50 per sq ft | $10 per sq ft | Product and color affect retail price |
| Installed patio | $16 per sq ft | $22 per sq ft | $30 per sq ft | Typical base, laying, and jointing included |
| 200-sq-ft patio | $3,200 | $4,400 | $6,000 | Before unusual access or drainage work |
| Individual paver coverage | About 3.5 per sq ft | About 3.6 per sq ft | About 4 per sq ft | Allow extra for cuts, breakage, and pattern |
What Cambridge 6×9 pavers cost for a patio
A straightforward 200-square-foot patio using Cambridge 6×9 concrete pavers commonly totals $3,200-$6,000 installed, with a midpoint near $4,400. This assumes ordinary site access, excavation, a compacted aggregate base, bedding sand, edge restraint, joint sand, and standard installation labor. A quote may exclude old-patio removal, drainage correction, steps, or upgraded borders.
For materials alone, a working budget is $5-$10 per square foot, or roughly $1.40-$2.80 per paver before waste. Actual dealer prices vary by Cambridge collection, surface finish, color, order size, and market. Some products are sold by the layer or pallet rather than as individual units, so the listed package coverage and freight charge matter.
For a typical accessible patio, budgeting around $22 per square foot installed is a useful starting point, not a guaranteed local quote. A small walkway can exceed $30 per square foot because mobilization and cutting are spread over fewer square feet; larger open layouts may approach the lower end.
Assumptions: Standard concrete pavers, a typical U.S. market, sound access, and no major retaining, drainage, or utility work.
How paver, base, and labor charges shape the quote
Installation estimates combine more than the paver purchase. The table shows common allowances for a standard patio; contractors may group several items into one labor or installation line. Verify whether each allowance includes delivery, compaction, edge restraint, and cleanup.
| Quote component | Typical price | Pricing basis | What it covers | Common cost trigger |
|---|---|---|---|---|
| Cambridge pavers | $5-$10 | Per sq ft | Standard 6×9 units | Premium finish or limited color |
| Aggregate base and bedding sand | $2-$5 | Per sq ft | Stone base, leveling sand | Deeper excavation or weak soil |
| Installation labor | $6-$12 | Per sq ft | Layout, setting, cutting, compaction | Intricate pattern or tight access |
| Edge restraint and joint sand | $1-$3 | Per sq ft | Perimeter restraint and joints | Long or irregular perimeter |
| Delivery and disposal | $150-$700 | Per project | Freight, haul-away, or both | Long haul or existing surface removal |
| Permits or drainage work | $0-$1,500 | Per project | Local review or site correction | Runoff rules or grading problems |
Base preparation and labor can equal or exceed the paver material charge. A paved surface may require excavation and a stable, compacted base rather than simply placing pavers over soil. Ask for the proposed base depth and material in writing, particularly where the ground stays wet or freezes.
Labor estimates can be checked with a simple calculation: . Crew rates are commonly about $50-$100 per worker-hour when converted from contractor pricing, but many installers quote the full job per square foot. A standalone hourly rate is not the same as the customer-facing installed rate, which also covers equipment, overhead, and project coordination.
How 6×9 patterns, cuts, and borders change material use
A nominal 6-by-9-inch paver covers 54 square inches before accounting for joint spacing, equivalent to about 3.56 units per square foot. In practice, coverage depends on the exact product dimensions and layout. For a 200-square-foot field, the basic count is roughly 712 pavers; ordering around 5%-10% extra brings the allowance to approximately 748-783 units.
Pattern choice can change labor and waste. A simple running bond is generally faster to lay than a herringbone arrangement, which uses more alignment and edge cutting. Budget roughly $1-$4 more per square foot for a labor-intensive layout or elaborate border compared with a straightforward field pattern, depending on the installer and site.
Curves, narrow strips, circular features, and many corners produce more offcuts than a rectangle. A rectangular patio with a clean perimeter may need only a modest waste allowance, while a curved or highly detailed layout may require 10%-15% extra material. Confirm whether the contractor returns unused full units or includes them in the estimate as nonreturnable stock.
Pattern and perimeter details influence labor and waste more than the nominal 6×9 size alone. Ask whether a contrasting border is priced by square foot or as a separate linear-foot charge; border layouts may require additional cutting and a different paver color or product.
Which site conditions push a Cambridge paver quote higher
Excavation depth is a major variable. A lightly loaded patio may need roughly 6-8 inches of excavation for the base and bedding layers, while driveways or areas exposed to heavier loads often need a thicker engineered base. An additional 2-4 inches of excavation can add about $2-$6 per square foot where soil must be removed and hauled away.
Soil condition and drainage also matter. Soft, saturated, or expansive ground may need stabilization, extra aggregate, or grading. A small drain or regrading adjustment might add $300-$1,500; a larger drainage system can cost more. If the patio meets a house, the finished grade must direct water away from the foundation rather than trapping runoff at the wall.
Access changes the labor plan. A crew moving materials through a narrow gate or down stairs may need extra handling time or smaller equipment. Restricted access can add 10%-25% to labor on a difficult job. Slopes, tree roots, buried lines, and retaining edges may also require work not included in a basic square-foot rate.
Ask the estimator to identify excavation depth, base thickness, drainage assumptions, and haul-away in the written scope. Those specifications make competing quotes easier to compare than a total price alone.
Three Cambridge 6×9 project quotes at different sizes
The examples below illustrate plausible installed budgets, not fixed manufacturer prices. They assume standard concrete pavers and ordinary regional labor. Actual quotes may vary with product line, base requirements, delivery, and demolition.
| Project | Scope and labor | Unit rate | Estimated total |
|---|---|---|---|
| 120-sq-ft walkway | Basic running bond, 2 workers for about 2 days, limited cutting | $25-$34 per sq ft | $3,000-$4,080 |
| 200-sq-ft patio | Standard base, simple border, 3 workers for about 2-3 days | $19-$28 per sq ft | $3,800-$5,600 |
| 400-sq-ft patio | Open access, herringbone field, 3 workers for about 4-5 days | $17-$25 per sq ft | $6,800-$10,000 |
A small walkway has a higher per-square-foot range because delivery, setup, and minimum crew charges are divided across less area. A 400-square-foot patio can have a lower rate per square foot, although its total is larger. Herringbone may increase labor even when the larger footprint improves installation efficiency.
Compare the quoted project specifications, not just the totals. Check whether each price includes excavation, base depth, paver quantity, waste, edging, joint sand, delivery, taxes, and cleanup. A low bid that omits disposal or uses a thinner base may not be comparable to a complete installation.
How long a 6×9 paver installation takes
A 100-150-square-foot walkway commonly takes a small crew about 2-3 working days, including excavation and preparation. A 200-300-square-foot patio may take 3-5 days, while a larger 400-square-foot project can require 4-7 days. Weather, soil, access, and layout complexity can extend the schedule.
Contractors may price labor as part of a square-foot installation rate, so asking for a separate hourly total is not always useful. When labor is listed by time, broad local planning rates of $50-$100 per worker-hour can help identify unusually high hours, but rates vary with region, insurance, overhead, and equipment. The estimate should specify crew size or expected work stages when the schedule is important.
Longer installation time usually signals extra preparation, more cuts, or restricted access. If one quote assumes a simple rectangle and another includes curved edges or a raised border, the labor totals should not be compared without adjusting for scope.
Regional labor and delivery differences across the U.S.
Installed rates can be about 15%-30% above a broad national midpoint in expensive coastal metros, where wages, insurance, and operating costs are higher. In smaller Midwestern or Southern markets, straightforward work may run 10%-20% below that midpoint, although local demand and contractor availability can reverse the pattern. These percentages are rough comparisons, not regional price guarantees.
Freight can have an outsized effect because pavers are heavy and are often delivered by pallet. A nearby supplier may charge around $150-$350 for a standard delivery, while a longer haul or difficult drop location can reach $400-$700 or more. Confirm whether the truck can unload near the work area and whether the quote includes pallet fees or a second delivery.
Use local installed quotes to calibrate the budget, then compare freight and labor separately where possible. A material price that looks low online may not be a saving after delivery, minimum order quantities, and local handling are added.
Ways to control a 6×9 paver budget without cutting durability
Keeping the footprint rectangular and selecting a simple running bond can reduce cutting and layout time. Avoiding small isolated pads or narrow extensions may also prevent extra mobilization. If the design can be adjusted before excavation, compare the cost per square foot for the current shape and a simpler one.
Choose a standard in-stock color and finish when appearance requirements allow. Ask dealers to price the same Cambridge 6×9 product in two or three available colors, and compare pallet coverage and delivery charges. Do not order too tightly: a 5%-10% allowance is often cheaper than paying for a small rush order if cuts or breakage leave a shortfall.
Keep the base specification clear rather than asking for the thinnest possible installation. A durable base suited to soil, drainage, and intended use can help avoid resetting pavers later. Savings should come from layout, material selection, and accurate scope—not from skipping compaction, edge restraint, or necessary drainage.
Get at least three itemized bids with matching area, pattern, base depth, and removal assumptions. Ask whether existing paving removal is included, whether unused pavers remain with the homeowner, and how changes are priced if the crew finds poor soil. Those details reduce surprise charges while keeping the comparison focused on equivalent work.