CertainTeed siding typically costs $400-$900 per square installed, where one square covers 100 square feet; premium or insulated vinyl can reach $1,200 per square. The final price depends on product line, local labor, wall preparation, trim, removal of old siding, and access to the exterior.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Vinyl siding material | $120 per square | $250 per square | $450 per square | Product and profile affect price |
| Installed vinyl siding | $400 per square | $650 per square | $1,000 per square | Standard installation, before unusual repairs |
| Premium or insulated vinyl installed | $700 per square | $950 per square | $1,200 per square | Higher-spec products and complex details |
| Typical 20-square project | $8,000 | $13,000 | $20,000 | About 2,000 sq ft of siding area |
Assumptions: U.S. pricing for CertainTeed vinyl siding, measured siding area, standard colors, and ordinary access. Regional quotes and product availability vary.
Typical CertainTeed vinyl siding prices per square
For common CertainTeed vinyl products, material alone generally runs $120-$450 per square, or about $1.20-$4.50 per square foot. A contractor-installed job commonly totals $400-$1,000 per square, including siding, standard accessories, labor, and routine cleanup. A straightforward home with a larger, uninterrupted wall area is more likely to fall near the middle of the range.
For budget planning, $650 per square is a reasonable midpoint for standard installed vinyl siding. A 15-square project might therefore cost roughly $6,000-$15,000, with about $9,750 as a midrange estimate. This is not a guaranteed national price: a small job may have a minimum charge, while complex elevations or premium specifications can push the total higher.
CertainTeed sells multiple vinyl lines and profiles, including standard lap siding and more detailed options. The brand name alone does not determine the quote. A contractor should identify the exact product, profile, color, and accessory package so the material allowance can be compared accurately.
Installed pricing usually assumes the existing wall sheathing is sound and that the house needs no major framing or moisture repairs. It may exclude permit charges, replacement of rotted wood, extensive trim work, and removal or disposal of existing siding. Those items should appear separately on the estimate.
What siding, labor, and trim add to a 100-square-foot quote
A square-based quote can be difficult to compare if one contractor includes removal and trim while another prices only the siding installation. The following breakdown shows common components for one square of standard vinyl siding; the ranges are approximate and not every contractor separates charges the same way.
| Quote component | Typical price per square | What it may cover | Pricing note |
|---|---|---|---|
| Materials | $120-$450 | Panels, starter strip, corner posts, and ordinary accessories | Product line and profile drive variation |
| Labor | $200-$450 | Layout, cutting, fastening, and installation | Complex walls raise labor hours |
| Equipment | $15-$60 | Ladders, staging, or lift allocation | May be included in labor |
| Delivery and disposal | $20-$100 | Material delivery and job debris handling | Old siding removal may cost extra |
| Permits and overhead | $10-$80 | Permit allocation, insurance, and business expenses | Local requirements differ |
Labor often represents a substantial share of the installed total. A basic installation may price labor at about $2-$4.50 per square foot, while detailed trim, multiple stories, or difficult access can push the labor allocation above that level.
Ask whether the per-square figure includes accessories, removal, disposal, and trim before comparing bids. Quotes that appear far apart may cover different scopes rather than different prices for the same work.
How panel thickness, insulation, and wall shape change the estimate
Product specification is one of the clearest price drivers. Standard, non-insulated vinyl is typically the least expensive option. Insulated siding, thicker panels, premium profiles, and specialty colors generally cost more because of the product itself and sometimes the extra work involved in fitting details around windows and corners.
As a planning range, standard vinyl may land around $400-$800 installed per square on a straightforward job. Insulated or upgraded vinyl may come to $700-$1,200 per square installed. The exact premium depends on the selected CertainTeed line, local stock, and whether the contractor must use additional trim or adapt existing openings.
Wall geometry also matters. A simple rectangular exterior with few openings is quicker to cover than a home with many gables, dormers, bay windows, or intricate transitions. Windows and doors reduce the net siding area but add cutting and flashing work, so measuring only gross wall area can overstate material needs and understate labor.
Height and access can move a quote as well. Two-story walls often require more setup than one-story walls; steep grades, narrow side yards, and landscaping that blocks ladder placement may call for staging or a lift. If the project includes more than 30 squares, the contractor may be able to spread setup and delivery costs across more area, though detailed architecture can offset that advantage.
Compare the same product and scope, not just the nominal price per square. Confirm that the bid specifies panel profile, thickness or insulation, corner treatment, window trim, and the method used to measure net siding coverage.
How to lower CertainTeed siding cost without cutting necessary work
Choose the product grade that matches the project rather than automatically selecting the most expensive profile. Standard vinyl may satisfy a straightforward replacement when the owner wants a familiar appearance and does not need insulated panels or specialty details. Request a written price difference between the base product and each upgrade.
Keep the scope stable once measurements and product choices are set. Changing colors, profiles, trim packages, or the amount of siding after materials are ordered can cause restocking fees, extra delivery charges, and schedule delays. A clear specification helps contractors price the same work and reduces allowances that may later be adjusted.
Do not remove old siding or trim without confirming who is responsible for moisture protection and disposal. Homeowners can sometimes reduce costs by moving outdoor furniture, trimming obstructing shrubs, or clearing access, but should avoid work that risks damaging the house or interfering with contractor preparation.
Collect at least three itemized estimates and compare product model, included accessories, tear-off, sheathing repairs, cleanup, warranty, and payment schedule. A low bid that excludes disposal or assumes no repairs may not be cheaper once change orders are added. Ask contractors to price optional repairs separately instead of hiding them in a broad contingency.
The safest savings usually come from controlling upgrades and comparing equal scopes, not skipping flashing or repairs. Damaged sheathing, water intrusion, or inadequate flashing should be addressed before new siding covers the wall.
Regional labor rates can shift a siding square by 10% to 30%
Installation prices tend to be higher in major metropolitan areas and regions with higher wages, insurance costs, or strong construction demand. Compared with a typical national estimate, an urban market may run about 10%-30% higher, while some rural areas may come in 5%-15% lower when contractors have reasonable travel and delivery costs.
These differences are not guaranteed. Rural jobs can become more expensive when crews travel long distances, local suppliers do not stock the chosen profile, or the project is too small to justify a dedicated trip. In high-cost cities, permit rules, parking, staging, and restricted work hours may add time beyond the labor rate itself.
Weather and local building practices also influence the estimate. Coastal exposure, heavy snow, high winds, or regional moisture concerns can affect fastening and flashing details. Ask the contractor to explain whether any code-driven or site-specific work is included, and whether the quoted product is available locally.
For a rough regional adjustment, apply 0.90-0.95 to a standard estimate in a lower-cost market or 1.10-1.30 in a higher-cost metro, then verify with local bids.
How long a siding crew takes and what labor covers
A crew of three or four installers may need about 4-8 working days for a typical 15-25-square house when the walls are accessible and sheathing repairs are limited. A small, simple home can take fewer days; a multi-story house with detailed trim, extensive tear-off, or weather delays can take longer. These are project durations, not a promise of uninterrupted work.
Labor includes more than attaching panels. Crews typically establish starter courses, install corners and trim, cut around openings, manage flashing details, and finish transitions at rooflines or utility penetrations. Correct spacing and fastening matter because vinyl expands and contracts with temperature changes.
Installers may charge a minimum for small projects, particularly when setup, delivery, and cleanup take a similar amount of time regardless of the siding area. If the work is limited to a single wall or a small repair, the per-square rate can therefore look much higher than the rate for a full exterior.
Request labor scope and expected crew size in writing when comparing estimates. An hourly figure is useful only when the expected hours, crew size, and work included are also clear.
Three CertainTeed siding quotes for different house sizes
These examples illustrate how product level, area, and labor complexity change the total. Square counts refer to measured siding coverage rather than floor area. Each example assumes sound sheathing and ordinary installation unless noted.
| Example | Scope and rate | Estimated total | What changes the price |
|---|---|---|---|
| Small ranch | 12 squares at $500-$750 per square | $6,000-$9,000 | Standard vinyl, simple walls, minimal trim |
| Two-story colonial | 20 squares at $600-$900 per square | $12,000-$18,000 | More access setup, window details, standard-to-upgraded product |
| Detailed home with insulation | 26 squares at $800-$1,150 per square | $20,800-$29,900 | Insulated panels, multiple gables, more cutting and trim |
For the two-story example, a contractor might estimate 120-200 crew labor hours at a blended $45-$75 per labor hour, producing approximately $5,400-$15,000 in labor allocation. The remaining amount covers product, accessories, equipment, overhead, and other included work. Labor-hour estimates vary by crew size and local pricing structure, so they should be treated as a comparison aid, not a fixed calculation.
Use comparable measurements and product specifications to judge whether a bid is reasonable. A 20-square estimate should state whether the number includes overage for cuts and breakage, and whether the contractor has deducted doors and windows consistently.
Old siding removal, disposal, and wall repairs are common extras
Removing existing siding can add roughly $100-$300 per square, depending on material, fastening, number of layers, and disposal costs. Additional tear-off may be needed when old siding is damaged, installed over unsuitable material, or prevents proper flashing. Confirm whether the quote includes hauling and landfill fees.
After removal, contractors may find damaged sheathing, wet framing, missing housewrap, or deteriorated trim. Basic localized sheathing replacement can add about $50-$150 per affected sheet, including labor and material in many markets; extensive rot or structural work requires a separate assessment. Replacing housewrap may add around $0.50-$1.50 per square foot of treated wall, depending on access and detailing.
Other possible extras include window and door trim upgrades, soffit or fascia work, replacement of gutters, moving fixtures, and permit or inspection fees. A simple trim package may add a few hundred dollars, while extensive architectural trim can add several thousand. Utility disconnections or special access equipment should also be listed rather than assumed to be included.
Get a written process for concealed damage before work begins. The estimate should state the unit rate for common repairs, how the contractor will document conditions, and who must approve extra work before it is performed.
Compare repairs and product upgrades before approving the final bid
For a small damaged area, a compatible panel replacement may cost far less than re-siding an entire wall. A limited repair could run about $300-$1,000 when the matching product is available and access is easy; extensive color fading, discontinued profiles, or hidden moisture damage can make a patch less practical. Ask the contractor to price the repair and full replacement separately.
Insulated siding can cost more upfront than standard vinyl, but the added panel insulation is not a substitute for repairing air leaks, improving wall insulation, or correcting water management. Evaluate the upgrade based on its price difference, the condition of the existing wall, and the project’s goals rather than assuming it will pay for itself through energy savings.
Warranty terms also deserve a line-by-line check. Product coverage and installation workmanship coverage are different, and the length or conditions may vary by product and installer. A higher quote is not automatically better protected; verify what is covered, how long labor is covered, and whether maintenance or registration requirements apply.
Choose repair, standard replacement, or an upgrade by comparing the full installed price and the work each option solves. The best value is the scope that addresses the exterior’s condition without paying for features that do not fit the project.