Commercial coin laundry machines typically cost $1,000-$15,000 per unit, with many standard coin-operated washers and dryers priced around $2,000-$6,000 before installation. Capacity, machine type, payment equipment, utility connections, delivery, and local labor rates drive the final estimate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Coin-operated washer | $1,500 | $4,000 | $10,000 | Commercial front-load models; price varies by capacity |
| Coin-operated dryer | $1,000 | $3,000 | $7,500 | Single-pocket models; gas units may need venting work |
| Stack washer-dryer | $3,000 | $6,500 | $12,000 | Combined footprint, commonly sold as one set |
| Installation per machine | $300 | $900 | $2,500 | Assumes existing utilities; major upgrades cost extra |
| Coin mechanism or payment setup | $150 | $450 | $1,200 | Coin box, reader, or compatible payment hardware |
What coin-operated commercial washers and dryers cost
A commercial coin washer usually costs $1,500-$10,000, while a coin-operated commercial dryer commonly runs $1,000-$7,500. Most buyers budgeting for conventional single-pocket equipment should expect roughly $2,500-$6,000 per machine before delivery and installation. Higher-capacity, heavy-duty, or premium-control models can exceed those ranges.
A stack washer-dryer often costs $3,000-$12,000 per set, depending on capacity, brand, controls, and whether coin hardware is included. A multi-pocket dryer may cost $5,000-$15,000 or more because it serves several customers from one cabinet. Confirm whether a quote covers the coin mechanism, required payment controls, freight, and startup.
A practical installed budget is about $2,000-$8,500 for a standard single machine when utility connections are already suitable. A larger project with new gas, water, electrical, or exhaust work can add thousands of dollars beyond the equipment price.
Assumptions: U.S. pricing for new commercial-grade equipment, standard coin operation, and ordinary access; regional quotes and used-machine prices vary.
Which washer, dryer, or stack setup gives the best value
Washer prices rise with drum capacity, extraction speed, construction, and controls. A small commercial washer in the 20-30 lb range may fall around $1,500-$4,000, while a 40-60 lb model often costs $4,000-$9,000. Large-capacity units above 60 lb can reach $8,000-$15,000, especially with advanced controls or high-speed extraction.
Dryers are priced by pocket count, capacity, fuel, and control package. A basic single-pocket dryer may cost $1,000-$3,500; larger 30-50 lb models commonly run $2,500-$6,000. Two-pocket or multi-pocket dryers often cost $5,000-$15,000. Gas models can have lower operating costs where gas service is available, but require compatible piping and ventilation.
Stack units can reduce floor-space requirements, but they are not automatically cheaper than separate machines. Compare price per usable washer and dryer pocket, service access, and whether the equipment can fit through doors and corridors.
| Equipment type | Typical purchase price | Common capacity | Budget note |
|---|---|---|---|
| Small commercial washer | $1,500-$4,000 | 20-30 lb | Lower initial cost; lower load volume |
| Large commercial washer | $4,000-$10,000 | 40-60 lb | Higher throughput and utility demand |
| Single-pocket dryer | $1,000-$6,000 | 20-50 lb | Fuel and venting affect installed price |
| Stack washer-dryer | $3,000-$12,000 | Varies by model | Useful where floor area is limited |
Capacity and configuration matter more than the coin feature alone. Similar machines can differ by several thousand dollars based on load size, commercial duty rating, controls, and included payment hardware.
How delivery, hookups, and coin hardware shape the quote
Equipment is only part of the invoice. Delivery may cost $100-$600 per machine for ordinary freight and placement, with difficult access, stairs, long carries, or lift-gate needs adding charges. Removal of an old unit commonly adds $100-$500 each, depending on disconnection and disposal requirements.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Installation labor | $300-$1,200 | Per machine | Access, anchoring, hookup complexity |
| Coin mechanism | $150-$600 | Per machine | Coin box type and compatibility |
| Delivery and placement | $100-$600 | Per machine | Distance, stairs, equipment handling |
| Old-machine removal | $100-$500 | Per machine | Disconnection and disposal rules |
| Utility or vent upgrades | $500-$5,000+ | Per project | Distance, capacity, code requirements |
Plumbing, gas, electrical, and exhaust work can outweigh delivery costs. A straightforward replacement using existing hookups may need only reconnection and testing. A new dryer bank may require a larger gas line, dedicated electrical circuits, exhaust duct changes, or makeup air, with costs varying by building layout and local code.
Labor is commonly billed at $75-$150 per hour for qualified commercial appliance or trade work. A basic installation may take 2-4 hours per machine, while a complex installation can take a full day or longer.
Ask for separate line items for equipment, freight, installation, payment hardware, removal, and utility changes. This makes it easier to compare quotes that bundle different services or omit site work.
Capacity and utility requirements that raise machine prices
Capacity is a major price threshold: moving from a 20-30 lb washer to a 40-60 lb model can add $2,000-$5,000, while units above 60 lb may add more. Larger machines also need adequate water supply, drainage, floor support, and electrical service. Verify the building’s available capacity before selecting equipment.
Dryer fuel and exhaust design can change both purchase and installation costs. Gas models may cost $200-$1,000 more than comparable electric versions, but the difference depends on the manufacturer and controls. A long or restricted exhaust run, multiple bends, or an undersized duct can require extra work; runs over roughly 25 ft deserve careful review against the manufacturer’s specifications.
Coin operation itself is not always included in the listed machine price. Retrofit coin drops may cost $150-$600 per unit, while integrated coin or hybrid payment configurations can add $300-$1,200. Check compatibility, coin denomination, security, and whether the control system supports the intended pricing.
Confirm machine dimensions, utility connections, and vent requirements before signing an equipment order. A low equipment quote can become expensive if the selected capacity does not match the site’s plumbing, electrical, gas, or exhaust limits.
How many labor hours does a commercial laundry install take
Replacing one machine in an accessible location with matching hookups can take 2-4 labor hours. Installing a washer and dryer pair may require 4-8 hours, including positioning, connection, coin setup, leveling, and testing. New utility runs, concrete anchoring, or exhaust changes can extend work to 1-3 days.
Installers may charge a minimum service fee of $150-$400, even when a small repair or one-machine hookup takes less than a full workday. A two-person crew may be needed for heavy machines, tight turns, or stairs. Ask whether quoted labor includes startup testing and removal of packaging.
For multiple machines, scheduling one coordinated delivery and installation visit can reduce repeated trip charges. Confirm that the building is ready before delivery, including clear paths, completed utility rough-ins, and available shutoffs.
How regional labor and delivery affect U.S. prices
Equipment list prices are often similar nationwide, but freight, labor, and utility work vary. Major metropolitan areas and high-cost coastal markets may quote 10%-25% more for installation than lower-cost rural or Midwestern markets. Rural sites can face the opposite pressure when the nearest qualified installer or parts distributor is far away.
Delivery distance, building access, and local contractor availability can have more impact than state boundaries. A machine delivered to a ground-floor commercial space may incur little handling expense, while a basement laundry room with narrow stairs may need special equipment or extra labor. Get a site-specific delivery quote rather than relying on the equipment’s advertised price.
Compare installed totals from local dealers, not equipment prices alone. Request identical model numbers and scope details so that regional price differences reflect real labor or freight costs rather than different machine specifications.
Three sample coin laundry equipment quotes by project size
A replacement quote for one 30 lb coin washer might include a $3,000 machine, $250 coin hardware, $180 delivery, and 3 labor hours at $100 per hour. The estimated total is $3,730 before tax, assuming existing hookups and no removal charge.
A small two-machine upgrade could include one 40 lb washer at $5,500 and one 30 lb gas dryer at $3,500. With $500 in coin hardware, $400 delivery, 8 labor hours at $110 per hour, and $600 for removal, the estimate is about $11,380 before tax and any gas or vent upgrades.
A space-efficient stack installation may include two stack sets at $6,000 each, $800 total payment hardware, $700 delivery, and 12 labor hours at $125 per hour. If utility connections need $1,500 in work, the project reaches about $17,900 before tax.
These examples show why a project estimate should identify the exact model, installation scope, and site assumptions. Local tax, permit requirements, difficult access, and utility upgrades can change totals materially.
Ways to lower the coin machine purchase and installation bill
Choose capacity from actual demand rather than buying the largest available machine. A 20-30 lb washer may be adequate for a low-volume property, while a busy laundromat may justify 40-60 lb equipment to reduce waiting and handle larger loads. Oversizing can increase purchase price, water use, and installation requirements without improving utilization.
Keep existing hookups when they meet the manufacturer’s specifications and local code. Before delivery, measure doorways, corridors, and the equipment location; confirm drain, gas, electrical, and vent positions. This preparation can prevent redelivery, storage, or extra labor charges.
Compare at least three written quotes using the same capacity, fuel type, controls, warranty, and delivery terms. Ask whether coin hardware is included and whether removal, startup, and tax are separate. A used machine may cost 30%-60% less than a comparable new unit, but condition, parts availability, warranty, and service history should be checked carefully.
The most reliable savings come from controlling scope and avoiding unneeded upgrades, not from choosing equipment that cannot handle the expected load. Consider bundling several replacements into one visit, but confirm that a package discount does not substitute lower-capacity models or exclude installation.