A Control4 touch screen typically costs about $1,200-$3,500 installed, with a common midrange quote near $2,200 for one new in-wall unit. Screen size, dealer pricing, wiring, mounting work, programming, and whether the home already has a Control4 system can shift the total substantially.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Touch screen hardware | $700 | $1,400 | $2,300 | Estimated dealer pricing; varies by model and availability |
| Installed in-wall screen | $1,200 | $2,200 | $3,500 | One screen, standard mounting and setup |
| Tabletop or portable setup | $900 | $1,700 | $2,800 | Screen and applicable stand or power accessories |
| New cable run or wall repair | $150 | $450 | $1,000+ | Added when the location needs wiring or finish work |
What a Control4 screen costs by size and installation
For budgeting, a current or recent Control4 touchscreen may be quoted at roughly $700-$2,300 for the device alone. Dealer quotes are not always itemized, and product availability can differ by region and system generation. An installed 8-inch-class in-wall screen often lands around $1,200-$2,600, while a larger 10-inch-class unit can reach $1,600-$3,500 installed. These are planning ranges, not manufacturer list prices.
A typical one-screen project is about $2,200 installed when wiring is already present and the wall needs no major changes. That estimate assumes standard residential access, an existing compatible Control4 controller and network, ordinary dealer programming, and a midrange U.S. labor market. A screen that is part of a larger automation project may be priced differently because programming, travel, and commissioning can be shared across several devices.
Some older Control4 screens may appear online for less than $700, but a low device price does not establish that the unit is new, compatible, supported, or ready to install. Verify the exact model, system generation, condition, warranty, and dealer support before comparing it with a current installation quote. Also ask whether the stated price includes sales tax, a mounting kit, power supply, and configuration.
Assumptions: One residential screen, standard materials, existing Control4 system, normal access, and no major electrical or drywall work.
How hardware, dealer labor, and wiring shape the quote
A written estimate is easier to compare when it separates the touchscreen from work performed at the home. Installation may include mounting, connecting power and network, enrolling the device in the system, assigning room controls, testing, and showing the homeowner how to use it. Replacing a screen in the same location usually costs less than adding a new control point.
| Quote item | Typical range | Pricing basis | What it may include |
|---|---|---|---|
| Touchscreen hardware | $700-$2,300 | Per screen | Model, screen size, finish, dealer supply |
| Mounting and connection | $150-$500 | Per screen | Standard in-wall installation and setup |
| Programming and testing | $150-$600 | Per visit or project | Room assignment, interface setup, commissioning |
| New low-voltage cable | $150-$600 | Per location | Accessible route; difficult paths can cost more |
| Wall repair and finish work | $100-$700 | Per opening | Patch, trim, or paint touch-up as scoped |
| Travel or service minimum | $100-$300 | Per visit | Dealer dispatch, diagnosis, or minimum labor charge |
Ask whether programming is a fixed project fee or billed by the hour. If the dealer charges hourly, an illustrative rate is $100-$175 per technician hour; a straightforward replacement may take 1-3 hours on site, while a new installation with cable routing and custom configuration may take 3-6 hours or longer.
These line items are not necessarily all additive. A dealer may bundle hardware, setup, and commissioning, or waive a separate travel charge when the work is part of a larger installation. The quote should state the screen model and quantity, what programming covers, whether old equipment is removed, and what work would trigger an additional charge.
Which screen size, wiring path, and system generation change price?
Screen size is a major hardware variable. An 8-inch-class unit generally costs less than a 10-inch-class model, and the larger display can add several hundred dollars or more depending on the specific generation and dealer. Compare actual model numbers rather than relying only on diagonal size: product lines differ in features, mounting requirements, and compatibility.
New wiring and system compatibility can change the total more than a modest size upgrade. A replacement in an existing cutout with usable wiring may need only a short visit. A new location with no cable, an obstructed wall cavity, or a route across floors can add $300-$1,000 or more. A run over about 50 feet, fire blocking, masonry, or finished ceilings can raise labor and finish costs beyond a simple cable pull.
System generation matters, too. A screen intended for one Control4 generation may not be a direct substitute for an older unit, even if the old screen fits the same opening. The dealer may need to check controller software, network requirements, power, mounting hardware, and the existing project configuration. If the controller or network also needs updating, the estimate can expand beyond the touchscreen itself.
Location affects labor. A screen mounted on an accessible interior wall is generally simpler than one on tile, stone, concrete, or a wall with limited access. Moving the display to a different room can require cable work and additional programming. Ask the installer to price the desired location separately from a like-for-like replacement so the added cost is visible.
What changes between a replacement and a new Control4 location?
A like-for-like replacement is often the lower-cost scenario if the existing screen location, cable, power, and system remain usable. The dealer can remove the old unit, mount the new one, connect it, and verify the interface. A planning range is $900-$2,200 total for a simpler replacement, depending on hardware and service minimums. If the home has several screens to replace, ask whether one visit reduces the per-unit labor charge.
A new location is usually more expensive because it combines hardware with pathway and finish work. One added in-wall control point may total $1,500-$3,500 when the cable route is straightforward; difficult construction access or wall restoration can push it above that range. A tabletop unit may avoid cutting a wall, but still needs a suitable surface, power access, and a reliable network connection.
Replacing only a failed screen does not automatically require replacing the entire automation system. However, a dealer should confirm whether the proposed screen can operate with the current controller and software. If an older system cannot support the desired unit, compare the cost of a compatible replacement with the cost of upgrading the controller and related equipment before authorizing work.
How dealer labor and travel affect regional screen pricing
Local labor and dispatch costs can make two quotes for the same screen differ. A practical planning adjustment is to expect metropolitan markets with higher technician wages and parking or travel costs to run roughly 10%-25% above a moderate-cost market. Rural locations may have lower hourly rates but higher travel charges, limited dealer availability, or a minimum service fee that makes a one-screen visit expensive.
Ask for an installed total tied to the job address, not just a national hardware estimate. In higher-cost cities, a standard one-screen installation may reach $2,000-$3,500 even without unusual construction. In lower-cost areas, a simple replacement may fall near $1,200-$2,200. Those ranges are broad because dealer labor policies, local taxes, and product sourcing vary.
Scheduling can matter when a technician must make a dedicated trip for a small job. Combining a screen replacement with other Control4 service at the same home may reduce duplicated travel and setup time, although the dealer may still charge for each device or programming task. Request separate line items for labor, trip charges, and any additional-system work so regional differences are easier to evaluate.
Three sample quotes for different screen installations
The following examples illustrate how scope affects a quote; they are not fixed market rates. Each assumes an existing Control4 system and a dealer-supplied screen. Taxes and major controller upgrades are excluded unless noted.
| Scenario | Screen and work | Labor assumption | Estimated total |
|---|---|---|---|
| Simple replacement | 8-inch-class screen, existing opening and cable | 2 hours at $125-$150 per hour | $1,100-$1,900 |
| New in-wall point | 10-inch-class screen, accessible 35-foot cable route | 4-5 hours at $125-$160 per hour | $2,000-$3,300 |
| Tabletop setup | 8-inch-class screen, stand and standard configuration | 1-2 hours at $100-$150 per hour | $1,000-$2,200 |
The labor assumption is only one part of each total; hardware model and dealer bundle determine much of the spread. In the new-location example, a route through a finished ceiling or masonry wall could add $300-$1,000 or more. In the replacement example, a failed cable, damaged wall opening, or unsupported system may require a separate repair or upgrade.
When reviewing an estimate, compare the same screen model, installation location, programming scope, and warranty. A quote that includes setup and commissioning may cost more upfront than a hardware-only listing but can represent a more complete project. Ask whether the dealer will leave the old screen in place if the new unit is incompatible, and whether any diagnostic fee is credited toward completed work.
When a Control4 app or remote costs less than another screen
A phone or tablet running the Control4 app can provide room control without purchasing another dedicated touchscreen, subject to system, software, and licensing requirements. The device may already be owned, but the homeowner should confirm app access, account setup, network coverage, and any dealer fees. A tablet used as a permanent wall panel also needs a mount and power solution, which can reduce the savings.
For occasional control, an existing phone or tablet can avoid the $700-$2,300 hardware outlay for a dedicated screen. For frequent use in a central location, a purpose-built Control4 panel may offer a more consistent interface and a fixed place for household members to control the system. A compatible remote may be less expensive for entertainment-room functions, but it does not necessarily replace an in-wall screen for lighting, climate, security, or whole-home control.
DIY installation is not always a direct cost substitute. The screen may require dealer configuration, system access, specific wiring, or a supported mounting arrangement. An unapproved used unit can also create compatibility and warranty problems. Before buying hardware independently, request the exact supported model number and confirm that a local dealer will configure it; otherwise, a low purchase price can become a costly dead end.
How to lower the quote without losing useful controls
Start by defining the job as either a replacement or a new control point. Keep the screen in its existing location when practical, reuse sound wiring, and avoid moving it merely for cosmetic preference. If the dealer identifies a cable or software issue, ask for a separate price for that work rather than accepting a combined upgrade without comparing alternatives.
The most dependable savings usually come from avoiding extra construction and duplicate service visits. Ask whether the dealer can bundle the screen installation with scheduled system maintenance, another room’s work, or multiple screen replacements. Confirm whether the programming fee is charged once per visit or separately for every screen, and request a written not-to-exceed amount for troubleshooting.
Compare at least two itemized quotes when possible. Each should identify the screen model, hardware price, labor hours or fixed labor charge, travel fee, cable work, wall repair, programming, taxes, and warranty. A quote that is $300 lower but excludes commissioning or assumes existing wiring may not be cheaper after completion. Have each dealer price the same scope and note any exclusions.
Finally, avoid paying for a larger display or system-wide upgrade unless the household needs the added functionality. A smaller compatible screen in the existing opening may provide the same room controls for less. If an older screen still works, ask whether repair or continued use is reasonable, but compare any diagnostic fee and parts availability with the installed replacement price before deciding.