Corian worktop cost per metre is typically about $420-$900 installed for a standard-depth counter, with an average near $650 per metre. The final price depends on slab color, countertop depth, edge profile, cutouts, installation access, and local labor rates; U.S. contractors usually quote by square foot rather than metre.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed Corian per metre | $420 | $650 | $900 | Based on a 25.5-inch-deep worktop |
| Installed Corian per square foot | $50 | $78 | $108 | Fabrication and standard installation included |
| Typical 25-square-foot kitchen | $1,250 | $1,950 | $2,700 | Before unusual demolition or plumbing work |
| Material only per square foot | $20 | $35 | $55 | Color, thickness, and supplier affect price |
What a Standard-Depth Corian Worktop Costs Per Metre
For budgeting, expect approximately $420-$900 per linear metre installed, with a common midrange quote of about $650. This conversion assumes a 25.5-inch-deep worktop, equivalent to roughly 6.25 square feet per metre. Since the metre price is calculated from area, a deeper island or breakfast bar costs more per metre than a standard counter.
U.S. fabricators generally price Corian by the square foot. A typical installed rate is $50-$108 per square foot, including ordinary fabrication, seams, and installation. Multiplying that rate by the area in one standard-depth metre gives roughly $310-$675; actual metre quotes can run higher when they include minimum charges, edge work, cutouts, or other items billed separately.
Use the square-foot rate and the stated depth to compare metre prices fairly. At 25.5 inches deep, one linear metre covers about 6.25 square feet. A 30-inch-deep counter covers about 7.3 square feet per metre, so the same square-foot rate produces a larger total. Assumptions: standard 25.5-inch depth, mid-grade Corian color, normal access, and routine installation in a U.S. market.
How Slabs, Fabrication, and Labor Shape the Quote
A quote may combine material, shop fabrication, installation, and removal, or list them separately. The table shows common budget allowances for a standard kitchen project. These figures are planning ranges rather than a national tariff; supplier terms and the scope included in an installer’s quote can shift the amounts.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Corian material | $20-$55 | Per square foot | Color, thickness, and availability |
| Shop fabrication | $15-$35 | Per square foot | Seams, edge profile, and cutouts |
| Installation labor | $10-$25 | Per square foot | Access, fit, and crew time |
| Sink or cooktop opening | $100-$350 | Per cutout | Opening type and edge finishing |
| Removal and disposal | $5-$15 | Per square foot | Old surface, backsplash, and haul distance |
The listed ranges are not always additive. Fabricators may bundle material and shop labor into a single square-foot rate, while cutouts and removal appear as line items. Ask whether the quote covers a finished edge, backsplash, sink seam, delivery, disposal, and taxes before comparing totals.
Labor and fabrication are often priced together, so compare the full installed scope rather than a bare material rate. A rough labor estimate can be checked with ; countertop installation labor commonly works out to about $50-$100 per hour, depending on region and crew setup.
Why Counter Depth, Cutouts, and Color Change the Price
Depth is a measurable cost driver. At the same installed rate of $50-$108 per square foot, a standard 25.5-inch worktop costs about $130-$275 per linear foot, or $420-$900 per metre. Increasing depth to 30 inches raises the covered area by about 18%, making the metre price approximately $495-$1,065 before any special fabrication.
Cutouts and edge details can add more than a small percentage to the job. A straightforward sink opening may add $100-$250; a cooktop opening is commonly $150-$350, particularly when the edge needs extra finishing. A built-up or decorative edge can add about $10-$35 per linear foot, while a simple eased edge is often included in the base rate.
Color and pattern affect both the material allowance and how seams must be arranged. Common, readily available colors may fit the lower material range of $20-$35 per square foot. Premium, translucent, or less readily available styles can reach $40-$55 per square foot or more. Large patterns may also require additional material to align at corners, increasing waste.
Every extra 10 square feet adds roughly $500-$1,080 at typical installed rates. A 12-foot run at standard depth is about 25.5 square feet, while a 12-foot run that is 30 inches deep is 30 square feet. Confirm the actual measured depth, backsplash height, and finished edge length on the estimate rather than relying on the room’s approximate dimensions.
What Three Kitchen Worktop Quotes Could Include
These examples illustrate how scope changes the total. They assume ordinary access and standard installation, not plumbing reconnection or major cabinet repair. Actual local quotes may fall outside these examples, particularly for small jobs where a fabricator’s minimum charge applies.
| Project example | Worktop area | Estimated installed total | Approximate metre rate |
|---|---|---|---|
| Short straight run, basic color, one sink cutout | 18 sq ft | $1,100-$1,850 | $360-$605 |
| Typical kitchen, two runs, sink and cooktop openings | 30 sq ft | $1,800-$3,400 | $470-$885 |
| Large kitchen, premium color, detailed edges | 45 sq ft | $3,200-$5,900 | $555-$1,025 |
The metre rates in the examples use standard-depth runs and divide the estimated installed total by the equivalent linear metres. For L-shaped counters, the total includes corner layout and possible seams, so the per-metre figure is an approximate comparison, not a substitute for a measured drawing.
Small worktops can have a higher unit price because setup, delivery, and shop minimums do not shrink with the surface area. A single short run may therefore cost more per metre than a full kitchen installation, even when the material selection and edge are basic.
How Removal and Job Access Add to Installation Charges
Removing an existing counter commonly adds $5-$15 per square foot, or about $150-$450 for a 30-square-foot kitchen. Tile counters, bonded stone, or surfaces that require careful cabinet protection may cost more. Disposal may be included in the removal fee or charged separately, so the quote should say whether haul-away and landfill charges are covered.
Installation itself may take about 4-8 hours for a straightforward small-to-medium job, with additional shop time for measuring and fabrication. A larger kitchen, multiple seams, or difficult access can require a longer installation or an extra crew member. Rates of roughly $50-$100 per labor hour are useful for checking an itemized estimate, but many companies quote a fixed project price.
Stairs, narrow entrances, long carries from a loading area, and limited parking can raise delivery or labor charges by $100-$500 or more. Cabinet adjustments, wall leveling, and plumbing reconnection are usually separate trades. Before work begins, ask who is responsible for correcting uneven cabinets or disconnecting and reinstalling the sink and faucet.
Confirm removal, delivery, and access charges before accepting a low base-rate quote. A price that excludes demolition may look cheaper but end up higher once the old surface, disposal, and site preparation are added.
How Corian Pricing Compares With Other Countertop Materials
Installed countertop prices vary by market and grade, but broad U.S. comparisons help frame a Corian estimate. Laminate often costs about $20-$60 per square foot installed, quartz commonly runs $60-$150, and granite is often $50-$150. Corian at roughly $50-$108 sits above many laminate options and overlaps with entry- to midrange quartz and granite.
Corian is a solid-surface material, so seams can often be made less visible than seams in many slab materials, and surface marks may be repairable by a qualified professional. Quartz and natural stone can offer different appearance and heat-resistance characteristics, but their repair methods and fabrication costs differ. Compare the same area, edge, cutouts, sink treatment, backsplash, and removal scope.
Repair may be more economical than replacing the entire worktop when damage is localized. A professional repair for a small crack, chip, or burn may cost around $200-$600, while larger repairs or color matching can exceed that range. A quote above $1,000 for substantial repair should be compared with replacement pricing, especially if the existing counter has multiple damaged areas.
For a fair material comparison, use the installed price per square foot and include the same cutouts and edge specification. A Corian quote that includes a sink opening and finished backsplash is not directly comparable to a material-only stone quote.
How U.S. Region and Scheduling Affect Corian Worktop Rates
Labor and supplier access create meaningful regional differences. Metropolitan areas with higher wages and overhead may quote 10%-25% above a national midrange, while some rural markets may be 5%-15% lower if a local fabricator is available. Remote locations can reverse that saving when delivery distance or limited contractor availability adds travel and mobilization charges.
Seasonal changes are less predictable than for outdoor trades, but scheduling can affect price. Busy remodeling periods may extend lead times and reduce flexibility; rush measurement or installation can add roughly 10%-25% when a shop must reschedule work or expedite fabrication. Confirm the lead time for the selected color before arranging demolition or plumbing work.
Multiple quotes are most useful when they are based on the same drawing and specifications. Ask each fabricator to state the square footage, color, edge style, cutouts, seam locations, installation, delivery, removal, and warranty. A quote with a lower rate but no stated exclusions can be difficult to compare with a detailed turnkey estimate.
Compare at least three written quotes using identical dimensions and scope. If a bid is far below others, check whether it excludes sink cutouts, backsplash, disposal, or final fitting rather than assuming the material is cheaper.
Which Corian Upgrades Can Be Left Out of the Budget
Scope control is the most direct way to reduce a worktop bill. Choosing a common in-stock color instead of a premium pattern can save several dollars per square foot; on 30 square feet, a $10-per-square-foot material difference equals $300. A simple eased edge may also avoid $10-$35 per linear foot in decorative-edge charges.
Keep the layout efficient where practical. Fewer corners and seams can reduce fabrication time and material waste, while an unnecessarily deep peninsula raises area and cost. If a backsplash is optional, price it separately: a short matching upstand may cost less than a full-height solid-surface wall panel, which can add several hundred dollars or more depending on height and length.
Prepare the site by clearing counters and arranging access, but do not alter cabinets or remove a surface unless the installer approves. Incorrect prep can damage cabinets or create measurement problems. If the current counter is sound, a professional repair may be preferable to replacement; if replacement is necessary, combining multiple runs in one visit can help avoid separate minimum charges.
Request a base quote plus itemized upgrade prices before choosing premium options. That makes it possible to keep the counter within budget without cutting essential fitting, safe cutouts, or proper support.