Installing an entry door and storm door together typically costs $1,300-$5,200, with an average near $2,800 for a standard-sized home opening. The final price depends mainly on door material, whether the frame needs repair, storm-door features, labor rates, and whether the old doors require removal or disposal.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Entry door and installation | $900 | $2,000 | $4,000 | Standard insulated steel or fiberglass unit |
| Storm door and installation | $300 | $800 | $1,500 | Basic model through full-view or retractable-screen model |
| Combined project | $1,300 | $2,800 | $5,200 | Includes typical labor and modest trim work |
| Combined installed rate | $13 | $28 | $52 | Approximate price per sq. ft. of door face |
Assumptions: One standard 36-by-80-inch opening, ordinary access, midrange products, and no major structural repairs. Prices are U.S. estimates; regional labor and product availability can change quotes.
What homeowners pay for both doors installed
An entry door and storm door installed as one project usually total $1,300-$5,200. A common midrange job falls around $2,000-$3,600 when the opening is sound, the entry door is steel or fiberglass, and the storm door has a standard screen and closer. The low end generally means basic products and uncomplicated installation; premium finishes, glass, custom sizing, or frame repairs push the total higher.
A practical budget for a straightforward paired installation is about $2,800, before unusual repairs or premium options. Entry-door prices commonly run $500-$2,500 for the unit, while storm doors run roughly $150-$900. Installation, hardware, and disposal account for the balance. Wood doors and ornate designs can exceed these ranges, especially when they are custom-sized or include decorative glass.
For a standard 36-by-80-inch opening, the combined door-face area is about 40 square feet. That makes the installed combined rate roughly $33-$130 per sq. ft. when comparing the full project total, although per-square-foot pricing is less useful than a quote that lists each door, labor, and repairs separately. A contractor may also set a minimum charge that makes a small door job appear expensive per square foot.
Assumptions: Existing jamb is reusable, no new electrical work is needed, and the entry door and storm door are installed in the same visit.
How door units, labor, and trim shape the quote
Quotes should separate product, installation, hardware, and opening work. The ranges below describe common installed components; they are not fixed national rates, and some contractors include basic trim or disposal in their labor price.
| Quote item | Typical range | Unit or scope | What changes the charge |
|---|---|---|---|
| Entry door unit | $500-$2,500 | Per prehung door | Steel, fiberglass, wood, glass, finish, and size |
| Entry door labor | $400-$1,000 | Per opening | Fit, leveling, weather sealing, and trim complexity |
| Storm door unit | $150-$900 | Per door | Screen type, glass, frame finish, and hardware |
| Storm door labor | $150-$450 | Per opening | Existing trim condition and closer or handle setup |
| Removal and disposal | $75-$250 | Both old doors | Haul-away distance and disposal requirements |
| Jamb, casing, or sill repair | $150-$1,000 | As needed | Rot, water damage, framing, or custom trim |
Product and labor are the largest predictable line items; hidden damage is the main source of surprise charges. A prehung entry door includes a frame and can simplify installation when the old jamb is damaged or out of square. A slab-only replacement may cost less as a product but can require careful fitting and hinge work, so it is not automatically cheaper overall.
Ask whether the estimate includes weatherstripping, threshold adjustment, lockset installation, interior and exterior casing, caulking, and haul-away. If materials are itemized, clarify whether the quoted door is a complete prehung unit or only the door slab. Sales tax may apply to products, and local rules differ on how labor is taxed.
Labor estimate example: 5-9 combined crew hours at $75-$125 per hour equals $375-$1,125 before any separate service minimum or repair work.
Door material, opening size, and damage change the price
Material selection can create a large difference even for the same opening. Basic insulated steel entry doors often cost less than fiberglass models; wood typically costs more and may need additional finish maintenance. For the storm door, a simple half-view or ventilating model is usually less expensive than a full-view door with removable glass, a retractable screen, or a heavy-duty frame.
Changing the product specification can add hundreds or more, while correcting a damaged opening can add labor and carpentry costs. A standard 36-by-80-inch door is generally the least complicated size to source and fit. At widths above 36 inches, heights above 80 inches, or for sidelights and double doors, the unit may need a special order and the opening may require different framing or trim.
Condition matters as much as dimensions. Minor shimming and weather sealing may be included in standard installation, but a soft sill, rotted jamb, or loose framing can add $150-$1,000 depending on how much material must be replaced. Extensive structural work or water damage can cost more. A contractor should inspect the sill and jamb before finalizing a fixed quote.
Storm-door compatibility also affects the estimate. Storm doors attach to exterior brickmold or trim, so narrow, uneven, or deteriorated mounting surfaces can require repair or an added mounting surface. A door closer, handle set, or pet-resistant screen may be included in some packages but priced separately in others. Confirm the product’s stated opening measurements rather than assuming the nominal door size matches the rough opening.
Assumptions: Price differences are for a single residential opening. Custom, oversized, double, or historic doors require measurements and a product-specific quote.
What installation labor covers in a standard opening
A qualified installer typically checks the opening, removes the old unit if included, sets and levels the entry door, fastens the frame, insulates gaps, seals the exterior, and checks that the door latches and swings correctly. The storm door is then fitted to the exterior trim, with its handle, closer, and screen or glass panel adjusted.
Expect roughly 4-8 hours for both doors when the opening is ready and the work is scheduled as one visit. A single installer may take longer than a two-person crew, while a straightforward storm-door-only installation can take about 1-3 hours. These are planning ranges, not guarantees; old fasteners, uneven floors, paint buildup, or a door that has shifted can add time.
Labor rates commonly fall around $75-$125 per hour for skilled door work, but many contractors quote per opening rather than billing by the hour. Minimum service charges of $150-$400 may apply, particularly for a storm door installed alone. If the entry door and storm door are purchased and installed together, ask whether the quote reflects shared travel and setup time.
Scheduling can also affect the charge. A routine appointment may be priced normally, while urgent work, weekend service, or a remote location can bring a premium. Confirm whether the crew will return for adjustments after the door settles and whether that visit is included in the labor warranty.
How to lower the combined door installation bill
Keep the scope close to a standard replacement when the existing opening is sound. Replacing a door in its current size and configuration avoids much of the added material and carpentry work associated with widening an opening, adding sidelights, or changing from a slab to a different style. Ask the installer to identify necessary repairs separately from optional appearance upgrades.
The most reliable savings come from comparing equivalent door specifications and limiting unneeded opening changes. Request at least two or three written estimates that list the same entry-door material, insulation level, storm-door style, hardware, removal, and trim work. A lower total may omit disposal, new casing, or lock installation, so compare the scope rather than the headline price alone.
Choose features according to use. A basic storm door with a standard screen can cost substantially less than a retractable-screen model, and decorative glass or custom color may not improve function for every entry. However, avoid choosing solely by the lowest door-unit price: poor fit, weak weather seals, or a short product warranty can create later repair expenses.
Prepare the work area by moving furniture and keeping the entry accessible. Ask whether the homeowner can remove a storm door or clear porch items safely, but do not remove a security door or alter the opening before the installer confirms it. Combining the two installations may reduce a separate trip charge. If only one door is damaged, compare repair or replacement of that unit before committing to both.
Regional labor rates make the same doors cost differently
Installed prices vary with wages, contractor demand, travel distance, and local product availability. As a broad planning comparison, metropolitan areas in the Northeast, West Coast, and parts of the Mountain West may run about 10%-25% above a national midrange quote. Smaller Midwestern and Southern markets can be about 5%-15% below it, while rural areas may have lower labor rates but higher travel or delivery charges.
These are directional differences, not guaranteed regional price lists. For a $2,800 midrange paired installation, a 15% premium would put a comparable quote near $3,220; a 10% discount would bring it near $2,520. Local taxes, permit rules, contractor availability, and the selected product can outweigh those broad regional patterns.
Older urban homes may cost more when masonry openings, narrow trim, or out-of-square framing require extra fitting. In storm-prone areas, impact-rated entry doors or upgraded hardware can raise product costs. In cold climates, buyers may choose better insulation and weather seals, but the installer still needs to confirm that the storm door and entry door work together without trapping moisture.
When comparing local estimates, use the same product model or equivalent specifications and ask whether delivery is included. A supplier’s lower door price may not include freight, while a local contractor’s bundled quote may include measurement, delivery, installation, and haul-away.
Three paired-door quotes for common home projects
These examples show how scope changes the total. They assume ordinary residential access and illustrate plausible estimates rather than exact rates for every market. Labor hours refer to combined crew time, and the installed per-square-foot figure uses approximately 40 square feet for both door faces.
| Project | Specifications | Labor and unit rate | Estimated total |
|---|---|---|---|
| Basic replacement | 36-by-80-inch steel prehung door, basic storm door, no frame repair | 4-6 hours; about $23-$35 per sq. ft. | $1,300-$2,000 |
| Midrange upgrade | Fiberglass entry door, half-view storm door, new lockset and minor trim | 5-8 hours; about $50-$80 per sq. ft. | $2,000-$3,200 |
| Premium repair job | Decorative fiberglass door, full-view storm door, sill and jamb repairs | 7-11 hours; about $90-$130 per sq. ft. | $3,600-$5,200 |
The midrange example represents a common balance of durability, features, and installation scope. The basic example assumes standard products and an opening that needs no carpentry. The premium example includes repair work and higher-priced products, not just a more expensive installation rate.
To evaluate a quote, check whether the entry door is prehung, whether the storm door includes its handle and closer, and whether the labor covers both installations. Ask for a written allowance or range if the jamb cannot be fully inspected until removal. A clear estimate should state who pays for additional repairs if hidden rot is discovered.
Removal, permits, and warranties that add to the total
Taking away old doors commonly adds $75-$250 if it is not included, with extra charges possible for heavy units, multiple trips, or difficult access. Delivery may be bundled or charged at roughly $50-$200, particularly for custom or oversized products. Replacing trim, repainting, or staining is often outside a basic installation quote and can add $100-$500 or more depending on finish and the number of surfaces.
Confirm exclusions before signing, especially disposal, finish work, and repairs discovered after removal. Permits are not usually required for a like-for-like door replacement, but requirements vary by city and may change when the opening is enlarged, structural framing is altered, or a fire-rated door is involved. Permit and inspection charges can range from about $50-$300 where applicable; the contractor should verify local requirements.
Product warranties commonly cover manufacturing defects for a stated period, while installation warranties address workmanship and may range from one year to several years. Coverage varies, and some warranties require professional installation or exclude finish fading, screen damage, or wear from normal use. Obtain warranty terms for both doors and ask who handles adjustments if a latch or closer needs tuning.
Rebates and incentives are not standard for ordinary door replacement. Some utility or local programs may support qualifying energy-efficient exterior doors, but eligibility often depends on product ratings, income rules, or preapproval. Verify current terms before treating a rebate as part of the project budget.