Mounting a TV on a stone fireplace typically costs $300-$1,200, with many standard installations averaging about $600. Stone type, TV size, access for drilling, mount selection, electrical work, and the distance between the screen and fireplace all affect the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stone fireplace TV mounting | $300 | $600 | $1,200 | Labor and basic mounting hardware |
| Mounting labor | $150 | $300 | $600 | Usually 2-4 hours |
| Heavy-duty mount | $50 | $150 | $350 | Fixed, tilting, or articulating |
| Concealed cable or outlet work | $100 | $300 | $800 | Depends on wall access and electrical scope |
Typical prices for mounting a TV on stone
A straightforward installation on an accessible stone veneer wall often costs $300-$600 total. A large television, irregular fieldstone, difficult access, or a full-motion mount can raise the price to $700-$1,200 or more. The average assumes a 55- to 75-inch TV, ordinary ceiling height, a suitable nearby outlet, and no major electrical changes.
For a basic job, installers may charge $150-$350 for labor, plus $50-$200 for a compatible mount and masonry hardware. Stone installation is usually priced per project rather than by square foot; when labor is quoted hourly, a common range is $75-$150 per hour. Assumptions: U.S. mid-market labor rates, standard TV weight, normal access, and no custom stone repair.
Budget about $600 for a typical stone fireplace installation, then allow extra for electrical changes or difficult masonry.
What drilling, brackets, and labor add to the quote
Quotes vary in what they include. Confirm whether the price covers the mount, masonry-rated anchors, locating studs or solid backing, cable routing, cleanup, and testing. Installers may use a hammer drill and specialized masonry bits; some include equipment in labor, while others list a service or setup charge.
| Quote component | Typical price | What can change it |
|---|---|---|
| Mounting labor | $150-$600 | Stone hardness, TV weight, height, and crew size |
| Bracket and anchors | $50-$350 | Mount style, screen size, and load rating |
| Drilling or setup fee | $50-$200 | Special bits, extra holes, or difficult access |
| Cable concealment | $100-$400 | Stone layout and route to a device or outlet |
| Electrical work | $150-$500 | New receptacle, circuit access, and local code |
A line-item quote makes it easier to separate necessary masonry labor from optional mount and cable upgrades.
How stone type, TV size, and mount style change price
Stone veneer is often easier to drill than thick natural stone, but the installer still needs to find reliable backing and use suitable anchors. Irregular fieldstone, slate, and very hard granite can require slower drilling or a mounting plate that spans multiple contact points. That can add $100-$400 compared with a simple veneer installation.
TV size and weight also matter. A 32- to 55-inch screen may need a simpler bracket, while a 75- to 85-inch set generally calls for a higher-capacity mount and two-person handling. A fixed mount may cost $50-$120; a tilting model often runs $75-$200; and a heavy-duty articulating mount can be $150-$350. If the stone is over 2 inches thick or uneven by more than about 1 inch across the bracket, extra leveling or custom hardware may be needed.
Stone condition and mount capacity matter more than screen size alone; the bracket must be rated for the TV’s actual weight.
How to trim the stone-mounting bill without cutting corners
Choose the mount style before requesting quotes and share the TV model, weight, fireplace photos, and intended viewing height. This helps installers price the right anchors and avoid a return visit. A fixed bracket can reduce hardware expense when a tilt or swivel feature is unnecessary.
Keep the work limited to mounting if an outlet and device connections are already positioned safely. Ask whether the installer can route cables through an existing channel rather than cutting or altering stone. Compare at least three itemized bids, checking that each includes masonry drilling, hardware, TV attachment, and cleanup. Avoid choosing a low quote that specifies ordinary drywall anchors for stone.
Deciding on mount features and cable routing before the visit can prevent unplanned labor and hardware charges.
How long a stone fireplace installation takes
A prepared installation commonly takes 2-4 hours with one or two technicians. Difficult stone, a large TV, or a high mantel can stretch the job to 4-6 hours. When labor is hourly, two technicians working for three hours at $75-$150 per technician-hour would produce $450-$900 in labor before hardware; some firms instead quote a flat project rate.
Installers may charge a $75-$150 minimum for a small service visit, and a second trip can add $50-$200 if the required mount or anchors are missing. Ask whether the price includes lifting the TV onto the bracket and confirming that the screen is level. Providing the TV, mount, and fireplace details ahead of time reduces delays and surprise visit charges.
When cable concealment or an outlet adds expense
Surface-mounted cable covers can cost about $20-$80 for materials and installation, depending on length and finish. Routing wires behind stone may cost $100-$400 or more, but not every fireplace allows a safe or accessible path. A new outlet behind the TV commonly adds $150-$500 when an electrician can extend power from a nearby source; a new circuit or extensive wall access may cost more.
Electrical work should follow local code, and power cords should not be concealed inside a wall unless the installation method and equipment are approved for that use. If a fireplace is frequently used, check the TV and mount manufacturers’ heat limits and measure temperatures at the planned screen location. Request separate prices for cable concealment and electrical work so optional upgrades do not get bundled into the mounting fee.
Three stone fireplace quotes for common TV sizes
| Example | Scope and labor | Estimated total |
|---|---|---|
| 55-inch TV on veneer | Fixed mount, 2 hours, basic anchors | $300-$500 |
| 65-inch TV on fieldstone | Tilting mount, 3 hours, leveling hardware | $550-$900 |
| 85-inch TV on uneven stone | Heavy-duty mount, 4-5 hours, cable routing | $900-$1,500 |
These examples assume ordinary access and no major electrical installation. The largest quote includes a more substantial mount and added labor; a new receptacle could increase it by another $150-$500. Regional labor rates, fireplace height, stone hardness, and installer minimums can shift each total.
Compare quotes against the same TV size, mount type, cable plan, and electrical scope for a useful price comparison.