A Country Flame wood stove typically costs $300-$3,500 on the used or restored market, while a complete installation can bring the total to roughly $2,000-$7,000. Price depends on the model, condition, certification, chimney work, and local labor; new old-stock units are uncommon and may cost more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used stove only | $300 | $900 | $1,800 | Working unit, condition and model vary |
| Restored or unusually complete stove | $1,200 | $2,300 | $3,500 | May include parts or documented refurbishment |
| New old-stock stove | $2,500 | $3,800 | $5,000+ | Rare; verify listing and installation eligibility |
| Basic professional installation | $1,500 | $3,000 | $5,500 | Assumes usable chimney and standard access |
| Complete purchase and installation | $2,000 | $4,500 | $7,000+ | Chimney replacement or major repairs can exceed range |
What a Country Flame stove costs by condition
Country Flame stoves are generally bought as used, refurbished, or leftover inventory rather than from a broad current retail lineup. For a typical used unit, a practical asking-price range is $300-$1,800. Units with visible wear, missing firebrick, uncertain history, or difficult-to-source parts tend toward the low end; clean examples with accessories and clear model identification may command more.
Refurbished stoves commonly list around $1,200-$3,500, depending on whether the work includes new gaskets, firebrick, glass, hardware, or professional inspection. New old-stock examples may be advertised for $2,500-$5,000 or more, but a higher price does not establish that a particular model is legal or suitable for installation in a particular location.
For budgeting, expect about $900 for a usable used stove before delivery, repairs, or installation. This estimate assumes a standard freestanding model, no major damage, and a local purchase. Assumptions: U.S. resale pricing, standard condition, stove only; regional listings and model availability vary.
How stove, chimney, and labor charges shape the quote
The appliance is only one part of the project. A contractor quote may include the connector pipe, chimney components, hearth protection, labor, inspection, and removal of an old unit. A stove that fits an existing compliant chimney can cost much less to install than one requiring a new insulated chimney through the roof.
| Quote component | Low | Average | High | Typical pricing basis |
|---|---|---|---|---|
| Used Country Flame stove | $300 | $900 | $1,800 | Per appliance |
| Connector pipe and fittings | $150 | $350 | $700 | Per installation |
| Insulated chimney materials | $500 | $1,200 | $2,500 | Per system; height and route matter |
| Installation labor | $500 | $1,000 | $2,000 | Per job; more for difficult access |
| Hearth, permits, and inspection | $100 | $450 | $1,200 | Combined; local requirements vary |
| Removal or disposal | $100 | $300 | $600 | Per old appliance, if needed |
These are planning ranges, not a fixed national tariff. A new chimney system may add $1,000-$3,500 or more, especially if it must pass through multiple floors or a difficult roof. A hearth extension or noncombustible wall protection can add several hundred dollars, and custom masonry work may cost substantially more.
Labor often runs about $75-$150 per crew-hour, but many installers quote a flat project rate. A straightforward replacement may take 4-8 hours; a new chimney route or framing changes can extend work to one or more days. Ask for separate appliance, chimney, labor, and permit amounts so a low stove price does not hide a high project total.
Which Country Flame models and conditions change resale value
Model identification matters because Country Flame sold different stove designs over time, and asking prices are not interchangeable across sizes, configurations, and condition. Request a clear photograph of the data plate, model name, serial number, firebox, door, and flue collar. A seller who cannot identify the unit makes it harder to verify dimensions, parts, installation instructions, or applicable emissions information.
Completeness can shift a quote by hundreds of dollars. Missing firebrick or a damaged baffle may require $100-$500 in replacement parts or fabrication, if suitable parts can be found. Door glass and gaskets may add roughly $75-$300, while a cracked casting, warped firebox, or damaged door frame can make a low-cost stove uneconomical to restore.
Capacity also affects fit and value. A stove intended for a large space may be oversized for a small, tightly insulated room, while a small firebox may not meet heating needs in a large or drafty house. Compare the manufacturer’s stated heating area and required clearances with the room and local code, rather than choosing by exterior appearance alone.
Certification and condition can matter more than the seller’s claimed heating capacity. Older appliances may not meet current requirements for new installations or sales in some jurisdictions. EPA rules and local rules can differ by product, sale type, and location, so confirm the exact model with the local building department and installer before paying a premium.
Why chimney height and hearth size move installation prices
Site details are among the strongest drivers of the installed price. A straight, accessible chimney route is usually less expensive than a route with offsets, multiple stories, or roof obstacles. For example, a standard chimney run of about 12-15 feet may fit a basic materials budget, while a run exceeding 20 feet can require additional pipe, bracing, roof work, or specialized labor.
Clearance requirements also affect the layout. If combustible walls or flooring are close to the stove, the installer may need approved heat shields, a larger hearth, or a different position. A hearth area around 36 by 36 inches can be a useful rough planning reference, but required dimensions depend on the specific stove manual, connector arrangement, and local code—not a universal standard.
Chimney condition can change the project from a hookup to a replacement. A sound, correctly sized system may need only inspection and minor repairs, often $150-$500. A corroded liner, inadequate clearance, or unsuitable chimney may call for a new listed system costing $1,000-$3,500 or more. Get the chimney inspected before treating a used-stove listing as the project budget.
Other important thresholds include flue diameter and connector length. The stove outlet size must match an approved configuration; reducing a flue size without manufacturer approval can create safety and code problems. Longer horizontal connector runs, multiple elbows, and poor access can increase labor and may affect draft, so have the installer review the route before purchase.
Regional labor rates and delivery can change the final price
Installed pricing varies with labor markets, code enforcement, climate, and contractor availability. In lower-cost rural areas, labor and delivery may run 10%-20% below a large metropolitan quote, although longer travel distances can offset savings. Major metro markets and high-cost coastal regions may run 15%-30% above a national midrange for comparable work.
Cold-climate demand can also affect scheduling and price. A fall rush may add 10%-20% to labor or make installation appointments scarce, particularly when contractors are handling emergency repairs. Spring or summer scheduling may provide more choice, but pricing still depends on the chimney work and local labor market rather than the season alone.
Transport is a separate consideration for a heavy used stove. Local pickup may cost nothing beyond a truck and help, while professional delivery commonly adds $100-$400 within a short distance. Stairs, long carries, narrow doorways, or a remote address can push delivery above that range. Compare delivered prices, not just online asking prices.
Three realistic purchase and installation budgets
A low-cost example is a sound used stove bought locally for $500, with $250 for connector materials and $700 for labor. If an existing chimney passes inspection and no permit or hearth changes are needed, the total is about $1,450. This is a favorable case, not a safe assumption for an uninspected system.
A midrange example uses a restored stove at $1,800, a $1,000 chimney and connector allowance, $1,100 labor, and $350 for delivery, inspection, or minor hearth work. The project totals about $4,250. This assumes an ordinary roof route and no major structural changes.
A more extensive example includes a $2,800 refurbished unit, $2,400 in chimney materials, $1,700 in installation labor, $700 for hearth and clearance work, and $400 for removal or delivery. The total reaches about $8,000. Chimney replacement and site work can cost more than the stove itself.
When comparing quotes, verify whether tax, permit fees, roof flashing, chimney cap, and disposal are included. Ask whether the quote covers an inspection and what happens if hidden damage is found. A written scope helps distinguish a true price difference from an estimate that excludes essential work.
What permits and inspections may add to the stove budget
Permit requirements vary by city, county, and state. A permit and inspection may cost about $50-$300 for a straightforward installation, but fees can reach $500 or more where plan review, multiple inspections, or related construction is required. Some jurisdictions require a licensed installer, specific chimney listings, or documented clearances.
Older Country Flame models need particular care because the model’s age and certification status can affect whether it may be installed as a new appliance. A used stove may be treated differently from a new sale, and local rules can be stricter than federal requirements. Ask the building department about the exact model and intended installation before purchasing; do not rely solely on a seller’s statement that the stove is compliant.
An inspection may uncover a need for a stainless-steel liner, chimney repairs, or additional fire protection. Those items can add $300-$2,500 or more depending on scope. Some homes may qualify for local utility or state incentives for qualifying heating equipment, but older used appliances generally should not be assumed eligible. Confirm code acceptance and incentives in writing before including them in the budget.
How to lower a Country Flame stove project price
Control the scope before shopping. Measure the intended location, identify the chimney route, and have an installer assess whether the existing system can be reused. Buying a stove first can lead to extra delivery, storage, or return expenses if the model does not meet clearance or flue requirements.
Compare at least three written installation quotes using the same scope: stove model, chimney length, connector parts, hearth work, permit, inspection, and removal. Ask about an hourly or flat-rate charge for unexpected repairs. A quote that excludes chimney components may look cheaper by $1,000 or more without being a lower-cost completed job.
Choose condition over cosmetic restoration. A clean, mechanically sound stove with intact firebox components may be a better value than an attractive unit needing specialized parts. Before purchase, inspect the firebox and door, confirm that the door closes properly, and price any missing components. Avoid paying extra for accessories that do not match the model or are not needed for the installation.
Scheduling outside the fall rush can improve contractor availability, and handling simple site preparation—such as clearing access and moving furniture—may reduce labor time. However, chimney work, clearances, electrical or structural modifications, and code decisions should be left to qualified professionals. The safest savings come from avoiding unnecessary upgrades and confirming compatibility before purchase, not from skipping inspection or required materials.