A used DeWalt DW705 12-inch compound miter saw typically sells for $100-$250, with a working, clean example averaging about $175. Price depends mainly on condition, included blade or stand, local availability, and whether the saw cuts accurately; the discontinued model can also require extra effort to find compatible parts.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Working DW705 saw only | $100 | $175 | $250 | Typical local private-party asking and sale range |
| DW705 needing repair | $40 | $75 | $120 | Motor, switch, fence, or accuracy issue may lower value |
| Saw with stand and usable blade | $175 | $275 | $375 | Depends on stand type and accessory condition |
| Replacement 12-inch blade | $25 | $45 | $80 | Price varies by tooth count and cut quality |
What a used DeWalt DW705 usually sells for
The DW705 is a corded 12-inch compound miter saw, not a sliding model. For a saw that starts reliably, holds its settings, and includes its blade guard and fence, a reasonable U.S. transaction price is usually $125-$225. The midpoint is roughly $175 before tax or transportation.
Lower-priced listings around $75-$125 often involve cosmetic wear, a dull blade, missing accessories, or a seller who wants a quick local sale. A clean saw with a sharp blade, wrench, and demonstrated square cuts can justify $200-$250. Prices above that are harder to support unless a quality stand, extra blades, or other useful equipment is included.
For a basic working saw, budget about $175 and treat $250 as a condition-dependent upper limit. Online listings may show higher asking prices than completed local sales because shipping a heavy saw is costly and sellers can leave listings active until a buyer accepts their price.
Assumptions: standard DW705 saw, normal working condition, private-party U.S. sale, no premium stand or major repair.
How the motor, fence, blade, and stand affect the quote
A used-tool price is easier to judge when the saw and extras are valued separately. A missing blade is not necessarily a deal-breaker, but a damaged fence, failed switch, or inconsistent bevel setting can turn a bargain into a repair project. These ranges are practical estimates for common parts and accessories, not a guaranteed parts list for every production year.
| Quote component | Typical amount | What the buyer should check | Price effect |
|---|---|---|---|
| Working saw and motor | $100-$225 | Starts smoothly; no burning smell, smoke, or unusual bearing noise | Largest share of the used price |
| 12-inch blade | $25-$80 | Correct diameter, suitable arbor fit, teeth intact, no visible damage | Adds value if sharp and appropriate for the work |
| Fence and miter table | $0-$60 in value | Fence is straight; table locks and detents engage | Damage can reduce value by $25-$75 or more |
| Portable saw stand | $50-$150 used | Legs, supports, locks, and rollers are present and stable | Can raise a complete package price substantially |
| Minor repair allowance | $20-$100 | Confirm parts are available before agreeing to the price | Subtract from the offer if service is needed |
Repair shops may charge a diagnostic or minimum bench fee of about $50-$100, with labor commonly around $75-$125 per hour. A small repair can therefore cost more than the difference between a used DW705 and a newer basic saw.
Assess the fence and cutting accuracy along with the motor; a saw that runs is not automatically a saw that cuts square. A missing wrench or ordinary blade is usually a manageable expense, while a bent fence, damaged guard, or intermittent electrical fault deserves a larger discount.
Which DW705 condition details change the price most
Condition creates the widest price spread. A saw with surface scuffs but no functional defects can remain near the normal range. Heavy job-site wear, a cracked housing, missing safety parts, or rough blade rotation may put it below $100. Cosmetic cleanliness matters less than stable settings and repeatable cuts.
Test the saw with a piece of scrap lumber if the seller permits it. Make a 90-degree crosscut and check it with a reliable square; then test a miter setting and return the saw to its stop. A deviation of more than about 1/16 inch across a 6-inch test cut can indicate adjustment, fence, or wear issues. That does not prove the saw is unusable, but it gives a buyer grounds to negotiate.
Blade condition also affects value. A 12-inch blade with missing teeth, discoloration, or visible warping should be treated as a replacement expense, commonly $25-$80. If the saw vibrates with a known-good blade, the problem may be more serious than a dull cutting edge. Ask whether the included blade is suitable for the buyer’s material rather than assuming every blade is an upgrade.
Pay for demonstrated operation and accuracy, not a seller’s claim that the saw is in good shape. A fully functional example with a straight fence can justify paying $25-$50 more than an untested listing, while an untested saw should generally be priced as a risk.
Production age and exact configuration can complicate comparisons. The DW705 has been discontinued, and listings may be incomplete or use the model name loosely. Verify the model label and inspect the actual saw before comparing it with a newer 12-inch model. Confirm that the guard, fence, table, and power cord are present and intact.
When a newer 12-inch saw is the better comparison
The DW705 makes the most financial sense when it is substantially cheaper than a comparable working replacement. A new entry-level 12-inch compound miter saw often costs about $250-$450, while higher-capacity or sliding models commonly cost more. Promotions and local inventory can shift those prices, so compare current equivalent models rather than relying on list prices.
A practical comparison is a $175 DW705 plus a $45 blade and possible $50 service charge, bringing the effective cost to about $270 before tax. At that point, a new saw near $300 may offer a fresh warranty and easier parts support. Conversely, a tested DW705 at $125 with a good blade can be a sensible purchase for occasional trim or framing cuts.
Sliding saws provide greater crosscut capacity but cost more and take up more room. A non-sliding DW705 may suit common trim and framing tasks, but buyers should check the cut capacity for the actual stock they use. For repeated wide-board cuts, comparing a used DW705 with a sliding model is not a like-for-like price comparison.
Compare the all-in used price with the new saw price, including blade, repairs, and transport. If those added expenses bring the used saw within roughly $50-$75 of a new equivalent, warranty coverage and reduced repair uncertainty may outweigh the savings.
Why DW705 prices vary between U.S. local markets
Local supply and transportation affect the amount a buyer can reasonably pay. In large metro areas with active tool resale markets, more listings can keep ordinary saw-only prices near $125-$200. In rural areas or smaller markets, fewer choices may push a clean example toward $175-$250, especially when the seller includes a stand. These are directional differences, not fixed regional price rules.
Online purchases can add roughly $40-$100 or more for shipping and handling because a miter saw is heavy and awkward to package. A low listing price may cease to be a bargain after delivery charges, marketplace fees, and tax. Local pickup avoids freight but can require fuel or time; include that cost when comparing two listings.
Regional construction activity and seasonal demand can influence availability. During busy building periods, convenient listings may move quickly, while winter or slower remodeling periods can give buyers more time to negotiate in some areas. The effect is usually less important than condition, accessories, and local supply, so it should not replace an inspection.
Use completed local sales or several nearby listings as the best price check. A seller’s asking price is not proof of market value, especially if a listing has been posted for weeks or includes a stand that is not useful to the buyer.
What to test before paying for a used DW705
Ask the seller to demonstrate a cold start, then listen for grinding, rattling, or speed changes. Check the cord for cuts, repairs, or exposed wire, and make sure the switch returns normally. Inspect the blade guard through its movement and confirm that the handle and lock controls operate without sticking. Do not test a damaged or unsafe saw under power.
With the saw unplugged, examine the blade for bent teeth, check that the fence is secure, and look for cracks around the table, motor housing, and handle. Confirm that the miter and bevel locks hold their settings. A small amount of dust is ordinary; metal filings, signs of overheating, or a strong electrical odor warrant caution.
For an accuracy check, use a square against the fence and blade, taking care not to touch sharp teeth. Then, if safe and permitted, cut scrap material and inspect the result. A seller who cannot demonstrate the saw may still have a legitimate reason, but the price should reflect the uncertainty. Avoid paying a working-saw premium for an untested unit.
Set a maximum offer before the inspection and reduce it for each missing or unverified feature. For example, start with a $175 value for a sound basic saw, subtract $40 for a replacement blade, and subtract another $50 or more if accuracy or electrical operation remains uncertain.
Which accessories are worth paying extra for
A compatible, stable stand can be valuable when the saw will be moved between job sites. A basic used stand may add $50-$100 to a package, while a sturdier model with functioning supports can be worth more. Check that mounting hardware is included and that the stand suits the saw; a seller’s total package price should not be compared directly with a bare-saw listing.
Extra blades add value only if they fit and are in usable condition. A sharp general-purpose blade might support a $25-$50 premium, while a worn blade should contribute little or nothing. Blade cases, clamps, and a sound dust bag may be useful, but small accessories should not justify a large increase in the saw price.
Warranty expectations should remain modest in a private-party sale. Most used-tool transactions provide no meaningful repair coverage, so any claimed remaining warranty should be verified with proof of purchase and current terms. Do not assign much value to a warranty promise that cannot be documented.
Pay extra for accessories that replace a purchase the buyer would otherwise make. A stand that will remain unused, or a stack of blades in the wrong size or condition, should not be counted at full retail value.
How to lower the DW705 purchase price without adding risk
Compare at least three local listings and separate saw-only prices from bundles. Ask the seller for the model label, a close photo of the fence and guard, and a short demonstration. A specific, respectful offer based on a replacement blade or missing accessory is more useful than a broad request for a discount.
Choose a tested saw with ordinary cosmetic wear rather than paying a premium for a polished appearance. If a blade needs replacement, price the exact blade before negotiating. Pick up locally when practical, but include travel expense and avoid rushing through the inspection just to secure a lower advertised price.
For a saw that needs repair, get a parts and labor estimate before purchase. A $75 unit with a suspected switch problem may become a $175-$250 purchase after diagnosis and service. If the required part is discontinued or difficult to source, even a low initial price may be poor value. Buyers who need reliable daily production should place more weight on warranty and downtime than on the lowest sticker price.
A sensible target is $125-$200 for a tested, complete saw and less for any unit with unresolved faults. Keep the offer tied to verifiable expenses, and walk away when the seller will not allow a basic inspection or the total approaches the price of a new equivalent.