A Girard G2000 awning typically costs about $3,000-$6,500 installed, with a midpoint near $4,600 for a standard RV replacement. The final price depends mainly on awning width, fabric and hardware choices, removal of the old unit, labor, and whether the RV needs electrical or mounting repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| G2000 awning and standard hardware | $2,200 | $3,400 | $4,800 | Parts-only estimate; size and configuration affect price |
| Installed replacement | $3,000 | $4,600 | $6,500 | Includes typical removal and installation labor |
| Installation labor | $500 | $900 | $1,500 | Usually two technicians; repairs can add time |
| Fabric-only replacement | $700 | $1,200 | $2,000 | When arms, motor, and rail remain usable |
Assumptions: U.S. dollars; standard RV access; no major wall, wiring, or structural repairs. Prices are planning estimates, not a manufacturer price list.
What a Girard G2000 Awning Costs Installed
For a complete G2000 replacement, a reasonable planning range is $3,000-$6,500 installed. A shorter or simpler configuration may fall near the low end; a wider awning, specialty fabric, added controls, or difficult access can move a quote toward the high end. Many standard jobs land around $4,000-$5,200 before tax.
Parts-only pricing is commonly estimated at $2,200-$4,800 for the awning assembly and related standard hardware. Final dealer pricing can vary by model year, exact configuration, freight, and availability. Buyers should confirm that the quoted unit matches the RV’s mounting arrangement and measured width rather than relying only on the G2000 name.
For budgeting, set aside about $4,600 for a routine complete replacement and more if the coach needs electrical or mounting work. This estimate assumes a functioning supply circuit, sound mounting surface, ordinary regional labor rates, and disposal of one old awning.
Width is a useful first comparison point, but published or dealer pricing may not scale evenly by foot. Arm geometry, fabric selection, motor and control configuration, and fitment requirements can change the parts cost. Ask for the part number and included components on the written estimate.
How Fabric, Motor, and Removal Shape the Quote
A complete quote usually combines the awning assembly, installation, removal, and small supplies. Some dealers quote the assembly as one line; others separate fabric, arms, motor, controls, and freight. Comparing the same scope is essential because a lower parts price may exclude removal or setup.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Awning assembly | $2,200 | $3,400 | $4,800 | G2000 unit with standard configuration |
| Installation labor | $500 | $900 | $1,500 | Removal, fitting, wiring check, and test |
| Freight and delivery | $100 | $250 | $500 | Oversize shipment or remote delivery may cost more |
| Sealant and mounting supplies | $50 | $125 | $250 | Fasteners, sealant, and minor consumables |
| Old awning disposal | $50 | $125 | $300 | Haul-away or shop disposal charge |
Assumptions: Component ranges describe common quote allowances; dealer packaging and local labor practices differ.
Labor may be billed as a flat installation charge or by the hour. When billed hourly, a practical planning range is $100-$175 per technician-hour, with two workers often needed to handle the long assembly safely. A crew of two working 3-5 hours at $100-$150 per hour would produce roughly $600-$1,500 in labor.
Check whether the quote includes the motor, control components, freight, old-unit removal, and tax before comparing totals. A stated “awning price” may be parts-only, while an installed price should identify labor and additional charges.
Which G2000 Width and Fabric Options Raise the Price
The awning’s measured width is one of the strongest price drivers. RV awnings are commonly specified by the mounting span or model fitment, not simply by the visible fabric width. A difference of 2-3 feet can change the assembly price, shipping needs, and number of technicians required, so the RV’s make, model, year, and original awning measurements should be checked.
Fabric and appearance choices can also shift the estimate. A standard fabric color may be included in a base quote, while a less common color, pattern, or special-order fabric can add approximately $100-$500. Confirm whether the quoted price includes the complete fabric-and-roller assembly or only the replacement canopy material.
Controls and electrical condition matter as well. A standard compatible control setup may be included, but replacing a switch, control module, wiring, or power connection can add about $100-$600 in parts and labor. If the existing motor or arm assembly is reused, verify compatibility and condition; saving on parts is not useful if worn components fail soon afterward.
Measure the existing mounting span and verify the exact RV fitment before accepting a size-based quote. Quotes for different widths or configurations are not direct comparisons, even when both are described as G2000 awnings.
Site condition creates a separate range. Sound mounting points and an accessible work area keep the installation closer to the standard labor allowance. Rot, loose fasteners, damaged wall material, or a complicated wiring route can add $200-$1,200 or more, depending on the repair. These costs should appear as identified repair work rather than an unexplained installation premium.
How Much RV Awning Installation Labor Takes
A straightforward replacement often takes a two-person crew about 3-5 hours, including removal, mounting, electrical checks, and operation testing. Shop minimum charges may apply even when the actual work takes less time. Remote mobile service can also add a travel fee, commonly $75-$250, or a mileage charge.
More involved work can take 6-8 hours or require a return visit when mounting surfaces need repair, wiring is damaged, or the replacement requires extra fitment work. At labor rates around $100-$175 per technician-hour, a two-person crew can cost $600-$1,400 for a 3-4-hour job; a longer repair can exceed that range.
Ask the installer to separate standard removal and installation from diagnostic or repair labor. A quote should say whether it includes testing the motor and controls, sealing fasteners, and confirming that the awning opens and retracts properly.
For a mobile appointment, the coach may need to be parked on a level surface with access along the awning side. Tight storage spaces, low clearance, or a location that prevents safe ladder or lift access can change the labor plan. A shop may charge less for travel but may require the RV to be transported or scheduled around service-bay availability.
Why G2000 Quotes Differ Across U.S. Regions
Local labor and freight create meaningful regional variation. A typical installed estimate in a lower-cost rural market may run 5%-15% below the national planning midpoint. Large metro areas and high-cost coastal markets often run 10%-25% above it, particularly where RV service bays are busy or technicians have limited availability.
These percentages are rough comparisons, not fixed regional prices. A remote location can have lower hourly wages but higher travel and delivery charges. Conversely, a large RV service center may have more parts access and lower freight costs while charging more per labor hour.
| Market type | Typical installed range | Cost comparison | Common reason |
|---|---|---|---|
| Rural or lower-cost market | $2,800-$5,700 | About 5%-15% below midpoint | Lower labor rates; travel may offset savings |
| Average-cost suburban market | $3,000-$6,500 | Near national planning range | Typical shop labor and freight |
| High-cost metro or coastal market | $3,400-$7,500 | About 10%-25% above midpoint | Higher labor rates and service demand |
Assumptions: Regional figures are broad installed-price planning ranges for comparable scope, not guaranteed local quotes.
Requesting one quote from an RV dealer and one from an independent RV repair shop can show whether the difference comes from labor, parts sourcing, or included services. Check that each shop is pricing the same width, configuration, freight, removal, and warranty terms.
When Fabric Repair Beats Replacing the Full Awning
If the fabric is torn or faded but the motor, arms, roller, and mounting points work properly, fabric-only replacement may cost $700-$2,000 installed. The lower end is more plausible for accessible, standard fabric and an uncomplicated job. A complex removal, specialty material, or required hardware can push the bill upward.
A complete assembly replacement makes more sense to price when the motor fails, arms are bent, the roller is damaged, or multiple parts are worn. Replacing only the canopy on a mechanically unreliable awning can postpone rather than avoid the larger expense. A technician can inspect the motor, arm joints, roller, wiring, and mounting rail before the owner chooses.
Ask for separate estimates for fabric-only work and complete replacement when the mechanical parts may still be reusable. The inspection charge, if any, is often about $100-$250 and may be credited toward repair work, but policies differ by shop.
Minor service may cost much less than replacement. A control or wiring diagnosis can run around $100-$250, while a small switch or connection repair may total $150-$500. Motor, arm, or roller repairs can range from roughly $300-$1,200 depending on parts and access. These are broad estimates; parts availability and the condition of the existing awning matter.
Preventive care is inexpensive compared with a failed assembly: keeping the fabric clean and dry, retracting it in strong wind, and checking fasteners can help avoid damage. Follow the RV and awning operating instructions, since wind limits and maintenance requirements depend on the installation.
Three G2000 Replacement Quotes With Different Scopes
Real-world estimates are easiest to evaluate when the scope is written down. The examples below are illustrative U.S. budgets rather than quoted dealer offers. Each assumes a compatible RV installation and ordinary access, with taxes excluded.
| Example | Specifications and labor | Estimated total | Cost detail |
|---|---|---|---|
| Basic replacement | Standard configuration; 2 workers, 3 hours | $3,200-$4,000 | $2,400-$2,900 assembly; $600-$900 labor; $200-$300 supplies and removal |
| Mid-range replacement | Wider fitment or special fabric; 2 workers, 4 hours | $4,300-$5,700 | $3,200-$4,100 assembly; $800-$1,200 labor; $300-$400 freight and disposal |
| Complex replacement | Large configuration and mounting repair; 2 workers, 6-8 hours | $5,800-$8,000 | $4,000-$5,000 assembly; $1,200-$2,400 labor; $600-$1,000 repair and delivery |
Assumptions: Illustrative line-item budgets; actual G2000 configuration, dealer pricing, and repair needs can differ.
The complex example should include photographs or a written explanation of the mounting repair. A broad allowance for “additional work” makes it difficult to determine whether the high price reflects necessary repairs, premium parts, or a padded estimate.
For each quote, compare the awning part number, measured width, fabric choice, included controls, labor hours, freight, disposal, warranty, and tax. Ask whether the shop will contact the owner before exceeding an allowance. This simple scope check can prevent a low parts quote from becoming a substantially higher final invoice.
How to Lower the G2000 Awning Price Without Cutting Scope
Keep the job limited to what inspection supports. If the motor, arms, and roller are sound, request a fabric-only price before authorizing a full assembly. If a full replacement is needed, avoid replacing functioning electrical components unless the installer identifies a compatibility or safety issue.
Choose standard fabric and controls when appearance or convenience upgrades are not important. Specialty colors and added control components can increase parts cost without improving basic weather protection. Confirm that any lower-priced configuration remains compatible with the RV and its existing wiring.
Save money by comparing identical written scopes, not by choosing the lowest headline price. Ask two or three RV service providers to quote the same size and configuration, with removal, freight, repair allowances, and testing listed separately.
Scheduling can matter, too. Booking routine work before peak travel periods may provide more appointment choices and reduce the chance of paying for urgent mobile service. If the awning is unsafe or cannot retract, however, delaying a needed repair can expose it to further damage. Have the technician state whether continued use is safe.
Owners can reduce some shop time by providing the RV year, make and model, existing awning measurements, photos of the mounting area, and a description of motor or fabric problems before requesting a quote. The shop can then identify fitment questions early and flag potential access, shipping, or parts issues.
Finally, check whether delivery, disposal, and inspection are included or charged separately. A $150 difference in a base quote may disappear once a $250 freight fee and $125 removal charge are added. The most useful estimate is the one that identifies the full expected out-the-door cost and explains what would trigger additional work.