A Graco GX 19 paint sprayer typically costs about $1,000-$1,600 new, with an average price near $1,300; used units often sell for $500-$950 depending on condition and included accessories. The final price depends on seller, kit contents, warranty, shipping, and whether the GX 19 is being compared with a newer or different Graco model.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New GX 19 sprayer | $1,000 | $1,300 | $1,600 | Price varies by seller, availability, and included parts |
| Used GX 19 sprayer | $500 | $725 | $950 | Condition, service history, and accessories matter |
| Tip and filter supplies | $25 | $65 | $140 | Replacement tips, filters, and small parts |
| Shipping or delivery | $0 | $35 | $100 | May be included in a new-unit offer |
| First-use setup supplies | $30 | $75 | $180 | Hoses, protective gear, and cleaning supplies, if needed |
Assumptions: U.S. retail pricing, a standard GX 19 unit, and no sales tax included.
What a GX 19 sprayer costs new or used
For a standard new Graco GX 19, a practical shopping range is $1,000-$1,600 before tax. A typical mid-range quote is around $1,300. Prices toward the lower end may reflect a sale, limited accessories, or older inventory; higher quotes may include a more complete package or paid shipping. The GX 19 is a compact electric airless sprayer intended for smaller finishing and painting jobs, rather than a large-volume commercial rig.
A used unit commonly falls between $500 and $950. A clean machine with a working pump, serviceable hose, spray gun, and usable tip tends to cost more than a bare or untested unit. A machine priced below $500 may need repairs or replacement parts, so its purchase price alone does not indicate a bargain.
Budget about $1,300 for a new standard unit and check the full kit before comparing offers. The quoted price may not include every item needed to start spraying. Check the model designation, voltage, included gun and hose, tip, warranty coverage, and seller return policy before ordering.
Assumptions: Typical U.S. seller pricing for a standard GX 19, with tax and optional accessories excluded.
How the gun, hose, and service parts affect the quote
The sprayer itself accounts for most of the purchase price, but package contents can shift the total. Some listings include a spray gun, hose, and tip; others may show a lower base price or omit consumable parts. Replacement parts can add up, particularly if a used machine needs a new hose, filters, or a compatible tip shortly after purchase.
| Quote item | Typical price | What changes the amount | When it applies |
|---|---|---|---|
| GX 19 sprayer | $1,000-$1,600 | Seller, availability, package contents | New unit purchase |
| Spray tip | $25-$60 each | Tip type, size, and brand | Extra or replacement tip |
| Gun filter and manifold filter | $8-$25 each | Filter type and pack quantity | Replacement or maintenance |
| Airless hose | $40-$120 | Length, compatibility, and construction | Missing or damaged hose |
| Cleaning and setup supplies | $20-$70 | Cleaning method and product choice | Initial setup or ongoing use |
| Shipping and handling | $0-$100 | Seller policy and delivery location | Online order or freight charge |
These are planning ranges, not guaranteed GX 19 accessory prices. Compatibility can vary, so verify the part number against the machine documentation or ask the seller before buying. A package that costs $80 more but includes the required gun, hose, and tip may be cheaper overall than a bare machine plus separately purchased parts.
Compare the delivered, ready-to-use total rather than the sprayer-only listing price. Sales tax may add roughly 0%-10% depending on location and transaction rules. A $1,300 purchase, for example, could add $0-$130 in tax, bringing the pre-accessory total to roughly $1,300-$1,430.
Which GX 19 condition and package details move the price?
Condition is the strongest factor in used pricing. A tested machine that primes, holds pressure, and sprays consistently is worth more than an untested unit. Ask for a demonstration using water or coating, and check for leaks, unusual pump noise, damaged electrical components, and worn seals. A repair estimate can erase the apparent savings if a pump or other major part needs attention.
Included equipment creates another measurable difference. A usable hose and gun may avoid $40-$120 for a hose and additional spending for a compatible gun or small parts. A second spray tip may add roughly $25-$60, while a case or accessory bundle can increase a seller’s asking price. Confirm that accessories are genuine, functional, and suited to the GX 19 rather than simply counting items in the box.
Availability and seller type also affect a new-unit quote. A specialist equipment dealer may charge more than a discount listing but provide clearer warranty handling, setup advice, or easier access to parts. Conversely, a low-priced marketplace listing may have limited return options. Warranty length, exclusions, and whether service is handled by the seller or manufacturer should be considered alongside price.
On a used GX 19, operating condition and included working parts matter more than cosmetic wear. A difference of $150-$250 between two units may be justified if the higher-priced machine has been tested, has a service record, and includes a complete working setup. It is harder to justify when both offers have the same condition and package.
How long setup and cleanup add to a painting job
The GX 19 purchase price does not include labor to operate it. For a small room, cabinet, or trim project, setup, masking, spraying, and cleanup can take several hours even when the actual spray time is brief. A solo operator may spend 1-2 hours preparing equipment and protecting surfaces, then another 30-90 minutes cleaning after the job. Drying and recoating time are separate from hands-on labor.
Professional labor rates vary by market and task. A painter may charge approximately $50-$100 per hour, or quote a fixed project price that includes preparation, materials, and cleanup. When comparing a contractor quote with buying a sprayer, include the worker’s time, paint, masking materials, and the cost of maintaining equipment. Renting or hiring may be more economical for a one-time project.
Example: 5-8 labor hours × $50-$100 per hour = approximately $250-$800 in labor, before paint and other job supplies.
Setup and cleanup can take as much planning as spraying on a short job. The GX 19 is equipment, not a turnkey labor service, and the buyer still needs to prepare surfaces, mask nearby areas, select compatible tips, and clean the fluid path promptly after use.
Three GX 19 purchase budgets for different buyers
A new-unit budget should include the machine, any missing accessories, tax, and shipping. These examples illustrate how the same model can produce different totals depending on condition and package. They exclude paint and the cost of paid labor.
| Buying scenario | Machine and parts | Other charges | Estimated total |
|---|---|---|---|
| Used, tested unit with hose and gun | $650-$850 | $30-$80 for filters or a tip | $680-$930 |
| New standard package | $1,150-$1,400 | $0-$100 shipping, plus tax | $1,150-$1,640 before tax |
| New unit with added tips and setup supplies | $1,250-$1,550 | $50-$150 shipping and supplies, plus tax | $1,300-$1,700 before tax |
For a used purchase, allow for a possible service expense rather than spending the full budget on the machine. For a new purchase, compare offers using an identical checklist: model, included accessories, warranty, shipping, and return conditions. A package total may be the best value even if its machine line item is not the lowest.
A realistic ready-to-use budget is about $700-$950 used or $1,250-$1,700 new before tax. The upper end includes extra supplies or delivery; it does not necessarily mean the sprayer itself is better.
How U.S. location changes GX 19 availability and price
Regional differences are usually less dramatic for a small shipped machine than for a labor-intensive installation, but location can still affect the final amount. Buyers in major metro areas may have more local dealers and pickup options, while rural buyers may face shipping charges or fewer nearby service providers. As a planning estimate, local availability and shipping can make a delivered price about 3%-10% higher or lower than a comparable advertised offer.
Dealer competition, stock levels, and regional demand can also change discounts. A local store may offer a price near the national middle range of $1,200-$1,400 but avoid delivery fees. An online seller may advertise $1,000-$1,250 and then add $40-$100 shipping. These are broad comparison ranges, not fixed regional price schedules; specific seller inventory matters more than state boundaries.
Sales tax is a separate location-based expense. Depending on state and local rates, a buyer may pay no sales tax on a qualifying transaction or roughly 5%-10% where tax applies. For a $1,300 machine, that could mean $65-$130 added at checkout. Confirm the final cart total rather than estimating from the headline price.
Compare local pickup and delivered totals using the same model and package. If an online listing is $75 cheaper but shipping is $60 and its return policy is weaker, the practical savings may be small.
When a rental or different sprayer costs less
Buying a GX 19 makes the most financial sense when it will be used repeatedly or when owning the equipment saves enough labor to justify the purchase. A short project may be less expensive with a rental, though rental rates and availability vary. A rough planning range is $75-$150 per day, with possible deposits, cleaning requirements, or accessory charges. Two rental days could cost $150-$300 before coatings and supplies.
A used sprayer at $650-$850 can be a middle ground for occasional work, but it transfers condition and service risk to the buyer. A new GX 19 costs more upfront but may include warranty protection and a clearer service path. A different sprayer model can also be cheaper, but check the required coating, tip capacity, job size, and compatibility before treating a lower sticker price as an equivalent substitute.
For a single small project, brush-and-roller application may have a lower equipment cost, especially if surface detail or masking makes spraying slow. It may take more labor and can produce a different finish. For frequent cabinet, trim, or smaller painting work, an airless unit can reduce application time, but paint preparation and cleanup remain part of the job.
Compare the full cost of ownership with the number of jobs planned. For example, a $1,300 purchase divided across 10 comparable jobs equals $130 per job before maintenance and supplies; across two jobs, it equals $650 per job. This simple calculation does not account for resale value, labor savings, or repairs.
Ways to lower the GX 19 price without cutting essentials
Compare at least three quotes with the same package specification. Ask each seller to list the gun, hose, tip, filters, warranty, shipping, and return terms separately. This makes it easier to identify a genuinely lower price rather than a stripped package that requires immediate add-on purchases.
Consider a tested used unit when the seller can demonstrate operation and provide a clear return window. Inspect the hose, gun, electrical cord, pump behavior, and signs of leakage. Set aside $50-$150 for likely wear items or servicing if the unit is older or has uncertain maintenance history. Avoid buying a machine that cannot be tested unless the price reflects the repair risk.
Choose only the accessories needed for the coating and project. An extra tip or hose may be useful for regular work, but a large bundle of parts does not save money if most will remain unused. Buying during a dealer sale can help, but compare the final price after shipping and tax; do not assume a promotion is cheaper than another seller’s standard package.
The most dependable savings come from matching the package to the job and checking the final delivered total. Keeping the machine clean and replacing worn filters or tips as needed can also reduce avoidable performance problems and premature service expenses.