A Graco TradeWorks 150 typically costs about $350-$550 new when available, with an average asking price near $450; used units commonly run $150-$350 depending on condition and included parts. The final price depends on seller, availability, sprayer condition, and whether hoses, a gun, and a suitable spray tip are included.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| TradeWorks 150, new | $350 | $450 | $550 | Price varies by retailer and remaining stock |
| TradeWorks 150, used | $150 | $250 | $350 | Working unit; verify wear and accessories |
| Replacement spray tip | $25 | $40 | $65 | Price depends on tip type and seller |
| Replacement hose | $40 | $75 | $130 | Check length and fitting compatibility |
| Professional spraying labor | $1.50 | $3.50 | $6.00 per sq ft | Job price depends on prep and finish scope |
Assumptions: U.S. retail and resale asking prices, before tax, shipping, and any required repairs. Availability and model-specific parts can change the total.
What a TradeWorks 150 costs as a complete sprayer
A reasonable budget for a complete new TradeWorks 150 is $350-$550 before sales tax and delivery. Around $450 is a practical planning figure when the machine is sold with its standard spray gun and hose. The low end generally reflects a discount or clearance offer; higher listings may reflect limited stock, bundled accessories, or a seller’s markup.
Budget about $450 for a complete new unit, but inspect the package contents before comparing listings. A bare or incomplete listing may appear cheaper and then require another $50-$150 for a compatible hose, gun component, or spray tip. The model name alone does not confirm that every accessory is included.
For a used machine, $150-$350 is a common budget range for a functioning unit. A lower price may be reasonable if the sprayer needs a new tip or routine cleaning, but it is riskier if the seller cannot demonstrate that it primes and maintains pressure. Ask for a test with water and look for leaks, irregular pulsing, or damaged electrical connections.
TradeWorks 150 listings may be scarce or vary by seller, so compare the exact model and package rather than assuming that similarly named Graco sprayers have identical specifications. Check the model plate, included parts, and manual before ordering parts or judging whether a price is competitive. Taxes and shipping may add roughly $20-$80, depending on the sale price and delivery location.
How the gun, hose, and tip affect the purchase price
The product price is only one part of the purchase. A seller’s package can include a spray gun, hose, and tip, while another listing may omit one or more of them. Replacement parts must fit the sprayer and the particular gun connection, so the lowest sticker price is not necessarily the lowest usable price.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Sprayer unit | $350 | $450 | $550 | New machine, seller-dependent package |
| Gun or gun replacement | $60 | $100 | $160 | Compatible replacement or upgrade |
| Hose | $40 | $75 | $130 | Replacement hose, length and fittings vary |
| Spray tip | $25 | $40 | $65 | New tip suited to the coating and job |
| Filters and small parts | $10 | $30 | $60 | Routine replacements or a small repair kit |
| Tax and delivery | $20 | $45 | $80 | Varies by location, seller, and shipping |
Allow roughly $50-$150 beyond the machine price if the gun, hose, or tip is missing or worn. That allowance is a planning range, not a fixed parts quote; original parts, compatible alternatives, and shipping can produce different totals.
For example, a $250 used unit with a serviceable hose but a worn tip might need only a $25-$65 tip. A $200 listing that lacks a usable gun and hose could require $100-$290 in replacements, before tax. Compare the cost of a complete package against the sum of the machine and missing components.
Do not count a tip as usable simply because it is included. A worn or clogged tip can produce an uneven pattern and extra overspray. Confirm that the tip is suitable for the coating and that the seller identifies its size; check the owner’s documentation for compatible parts rather than relying on a guess based on the model name.
Why tip size, wear, and included parts change the quote
Condition and compatibility are the most important price drivers for this particular sprayer. A clean, tested unit with a working gun and hose can justify a higher resale price than an untested machine. A low-pressure test, missing prime or spray components, visible leaks, or a seller unable to show the machine running should lower the offer or prompt the buyer to walk away.
A tested, complete sprayer is worth comparing differently from an untested machine sold as-is. Before purchase, ask whether it primes, holds pressure, and sprays water in a consistent fan. Check the inlet screen, filters, hose, gun, power cord, and connections for damage. Dried coating in the fluid path can make a repair more expensive than a straightforward tip or filter replacement.
Tip size matters because the coating and intended spray pattern determine the appropriate tip. A tip that is too small may clog or require thinning if the product instructions allow it; an unsuitable large tip can use coating quickly and create excess overspray. Replacement tips typically cost $25-$65, but the correct selection should follow the coating label and the sprayer’s documented limits.
Also distinguish the TradeWorks 150 from other Graco models with similar names or different capacities. A seller’s photo, model plate, included gun, and stated operating specifications are more dependable than a short marketplace title. If the listing’s claimed maximum pressure or compatible tip range conflicts with the manual, confirm the exact model before paying.
Repair needs can change the economics quickly. A minor filter or tip replacement may cost under $65, while a damaged hose, gun, or internal fluid component can add $60-$200 or more, depending on the part and service availability. Ask a repair shop for an estimate before buying a unit that has sat unused or has dried material inside it.
When a used TradeWorks 150 beats a new listing
A used TradeWorks 150 at $150-$250 can be a good value when it is complete, clean, and demonstrated in working order. At $300-$350, the seller should be able to show strong condition, useful accessories, or a recent service history; otherwise, the price may be too close to a new listing to offset the uncertainty.
Compare the complete, working package price rather than the used machine’s headline price. For instance, a $200 sprayer with a good gun and hose may cost less overall than a $160 unit that needs $150 in parts. New equipment generally offers clearer return options and less uncertainty about wear, while used equipment can save money if it passes a live test.
Buying new makes more sense when the price difference is small, the unit will be used frequently, or missing parts would erase the savings. Buying used is more attractive for occasional projects if the machine can be tested and the buyer can identify compatible replacement parts. A damaged or untested unit should be priced as a repair project, not as a ready-to-use sprayer.
Include shipping in the comparison. A used listing with a $30 delivery fee and no return option may be less appealing than a slightly more expensive local unit that can be inspected. For an online purchase, request clear photos of the model plate, hose connections, gun, and power cord, plus a video showing the unit priming and spraying water.
What a contractor charges to spray a typical room
The sprayer’s purchase price is separate from the price of hiring a painter. Professional airless spraying often costs about $1.50-$6.00 per square foot of surface area, not floor area, when the quote includes some combination of masking, application, and cleanup. Simple open areas tend toward the low end; extensive preparation, trim protection, multiple colors, and small complex rooms push the cost higher.
Labor and preparation can cost several times more than the sprayer itself on a one-room project. A painter may charge $50-$100 per hour or quote a fixed project total. Estimates should state whether they cover primer, paint, masking, surface repairs, and back-rolling where needed.
For a 12-by-12-foot room with 8-foot ceilings, the four walls total about 384 square feet before subtracting doors and windows. At $1.50-$6.00 per square foot, spraying those walls alone could land around $575-$2,300. Ceilings, trim, heavy masking, and repairs may be priced separately, so this is a comparison range rather than a complete room quote.
For a time-based estimate, 6-12 labor hours at $50-$100 per hour equals $300-$1,200 in labor, before paint, supplies, and other charges. Ask whether the contractor’s hourly estimate includes setup, masking, spraying, and cleanup; spray application itself may be quick, while preparation consumes much of the job time.
How U.S. location and shipping shift the asking price
Retail and resale prices can differ by region because of seller availability, local competition, shipping distance, and stock. As a planning estimate, buyers in large metro markets may see prices about 5%-15% above a national-style $450 reference when local supply is limited, while discount retailers or clearance stock may run 5%-10% below it. These are comparison allowances, not guaranteed regional rates.
For a shipped purchase, compare the delivered total rather than the advertised price. A $390 listing plus $40 shipping and $30 tax reaches $460. A local $430 listing with no delivery charge could therefore cost less, even before considering the benefit of inspecting the unit or avoiding shipping damage.
Remote and rural buyers may face higher shipping costs or fewer local used listings, while large cities may offer more resale choices but also more variation in condition. Rates for professional painting likewise vary with local labor costs. A contractor quote in a high-cost metro can be 15%-30% higher than a similar scope in a lower-cost market, especially when labor and access are significant.
Compare at least two or three listings or written quotes using the same scope. For equipment, normalize the price by listing the included gun, hose, tip, tax, and delivery. For painting, compare surface area, preparation, coating, number of coats, and cleanup rather than relying on a per-room figure alone.
Which extras are worth including in the budget
A new sprayer may require paint-compatible filters, protective coverings, cleaning supplies, and a suitable tip. A modest accessory budget of $30-$100 is often enough for basic replacements and masking supplies, while extensive surface protection or multiple tips can raise the amount to $100-$200. The coating’s instructions and the exact model manual determine what is appropriate.
Budget separately for consumables and cleanup instead of treating the sprayer price as the whole project cost. Paint, primer, strainers, protective plastic, tape, and cleaning materials are not necessarily included with the machine. For a painting job, coating costs depend on product and coverage; estimate paint from the label’s stated coverage and the actual surface area.
Check the seller’s return policy and warranty terms before buying. A new unit may have a manufacturer warranty subject to its terms, while used equipment may have no practical warranty or return protection. Do not assume that a marketplace seller’s description provides coverage. A $20-$50 price difference can be worthwhile if the more complete listing offers a clear return window.
Professional estimates may include a minimum service charge, masking materials, disposal, or travel. Request each item as a separate line when possible. That makes it easier to distinguish necessary preparation from optional upgrades and to compare a contractor’s quote with the cost of doing the work using purchased equipment.
How to lower the TradeWorks 150 total without risky cuts
Start by matching the purchase to the actual job. If the machine will be used once, compare a local rental quote with the delivered cost of a complete sprayer and accessories. If repeated projects justify ownership, compare new and tested used units using the same package list. Avoid buying a cheap incomplete machine unless replacement parts are confirmed and priced beforehand.
The safest savings come from controlling the package and scope, not from ignoring wear or compatibility. Ask sellers to identify every included part, confirm the model number, and demonstrate operation. For contractors, define the areas to be sprayed, the required finish, and who handles masking and repairs before accepting a quote.
Choose a tip for the coating and job rather than buying several sizes speculatively. Replace a worn tip when necessary, but do not pay for premium accessories that the manufacturer does not recommend or the project does not need. Likewise, avoid substituting an incompatible hose or gun just because it is cheaper; a poor fit can cause leaks, performance problems, or added repair expense.
Compare total costs after tax and shipping, and ask whether local pickup is available. For professional work, request an itemized estimate that separates labor, materials, preparation, and cleanup. If preparation is manageable, completing basic room clearing or moving furniture may reduce billable time, but surface repairs, masking around sensitive areas, and coating preparation should follow the contractor’s instructions.