Granite chip repair usually costs $150-$400 for a professional visit, with small, accessible chips often near $100-$200 and larger or color-matched repairs reaching $500 or more. The granite chip repair price depends mainly on chip size, location, stone pattern, color-matching effort, and whether the technician must travel or complete multiple repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Professional repair, one chip | $100 | $250 | $500+ | Includes typical service call and repair materials |
| DIY repair kit | $10 | $30 | $75 | Best suited to minor chips in inconspicuous areas |
| Extra chip on same visit | $25 | $75 | $150 | Price depends on size and matching work |
| Sealing after repair | $50 | $125 | $250 | May be included or priced separately |
Granite chip repair prices by chip size and job scope
A technician commonly charges $150-$400 to repair one small or medium countertop chip. A chip smaller than 1/4 inch may cost $100-$200 when it is easy to reach and the stone is a common color. Repairs around 1/4-1 inch often fall between $175 and $350 because they need more filler, shaping, and color blending. Large chips, broken edges, or multiple damaged spots can push the bill to $300-$700.
Many contractors use a minimum service charge of $100-$200, even if the repair takes less than an hour. That minimum covers travel, setup, tools, and small quantities of specialty resin. A repair near a sink cutout or a countertop seam may require more careful work than a similarly sized chip on a straight, open edge.
For a single ordinary chip, budgeting about $250 is a reasonable starting point. That estimate assumes a standard residential visit, a small-to-medium defect, normal access, and a technician who can blend the repair without removing the countertop.
Assumptions: U.S. residential countertop, one localized chip, standard professional materials, and no slab replacement.
What labor, resin, and color matching add to the quote
Most of the professional price comes from skilled labor and the minimum visit charge rather than the quantity of filler. Technicians clean the damaged area, prepare the stone, fill the void, shape the repair, and polish or blend the surface. A resin or epoxy kit may cost only $10-$40 in materials, but professional-grade colorants, abrasives, and polishing supplies are part of the service price.
Labor rates for stone repair commonly work out to about $75-$150 per hour, although a contractor may quote a fixed price instead of billing by time. A small repair may take 1-2 hours on site, including setup and cleanup. A highly visible repair in a patterned slab can take longer because the technician may need to layer colors or reproduce veins.
| Quote component | Typical range | What it covers | When it may rise |
|---|---|---|---|
| Labor and service call | $100-$250 | Travel, setup, repair, and cleanup | Long travel or difficult access |
| Resin, epoxy, and colorants | $10-$60 per repair | Filler, pigments, and bonding supplies | Several colors or layered blending |
| Grinding and polishing | $25-$100 | Shaping and smoothing the repaired edge | Deep damage or a polished profile |
| Sealer or finish work | $0-$125 | Optional surface treatment around repair | Wider-area sealing or special finish |
| Extra chip on same visit | $25-$150 each | Additional localized repair work | Large chips or separate work areas |
Ask whether the quote includes color matching, polishing, travel, and tax before comparing totals. A lower initial price may exclude the finishing work that makes the repaired spot less noticeable.
How chip width, edge position, and granite pattern change price
Chip dimensions are a useful first clue, but depth and position matter too. A shallow chip under 1/4 inch wide may need only a small amount of filler and light polishing. A defect 1/2 inch wide or larger can require layered filling and additional shaping, especially if it extends into the countertop edge or exposes a rough interior.
Edge chips are often more expensive than small surface chips. Recreating a bullnose, eased, or beveled edge can add $50-$150 because the repair must follow the countertop profile. A chip within about 2 inches of a sink cutout, seam, or cooktop may also need more careful preparation. If the stone is cracked or moving, filling the chip alone may not address the cause; stabilization or a separate crack repair can add $100-$300.
Stone appearance changes the labor estimate. A mostly uniform black or white slab can be easier to blend than granite with strong veins, speckles, or several colors. Patterned granite may add $50-$150 for color-matching work. Dark or highly reflective polished surfaces can also make slight differences in gloss more visible than they are on a honed finish.
Size and visibility are the biggest practical price signals: a 1/8-inch chip on a flat surface is not the same job as a 3/4-inch edge loss beside a sink. Photos with a ruler beside the damage can help a contractor screen the work and give a more useful preliminary range.
Assumptions: Chip measurements refer to the widest dimension; prices exclude crack stabilization and slab replacement.
DIY epoxy kits compared with a professional granite repair
DIY kits generally cost $10-$75, with many small repair kits priced around $20-$40. They may include clear or tinted epoxy, pigment, a mixing surface, and basic instructions. They can work for a tiny chip in a low-visibility spot if the owner is comfortable blending color and polishing the repair. Buying separate pigments, abrasives, or polishing pads can raise the supply total to $50-$100.
A professional repair usually costs $150-$400 but includes preparation, material selection, shaping, and finishing. A technician is more likely to produce a close match on a prominent edge or a busy stone pattern. DIY work can leave a visible color mismatch, a raised resin spot, or a dull patch. Correcting a poorly matched fill may cost $100-$250, and removal can be difficult if the epoxy has cured.
For a small hidden chip, a kit may be the lowest-cost choice if the stone is stable and the repair does not need a precise edge profile. For a kitchen island edge, a sink-side defect, or a patterned slab, professional work is often more predictable. Replacing a countertop is generally disproportionate for one isolated chip; replacement becomes a separate consideration when damage is extensive, the slab is cracked across a broad area, or the countertop is already failing.
The DIY savings are largest when the chip is tiny, simple, and out of direct view. Before applying a kit, owners should check the product instructions for the stone finish and avoid using a repair compound that is not intended for natural stone.
Regional granite repair rates from cities to rural areas
Prices vary with local labor rates, technician availability, and travel distance. In lower-cost parts of the Midwest and South, a straightforward repair may fall around $125-$300. In many suburban markets, $175-$400 is more typical. Major coastal cities and high-cost metro areas may run 15%-35% above a national middle-market quote, putting a similar repair around $225-$550.
Rural homeowners may see fewer local stone specialists and a longer trip charge. A contractor traveling 30-60 miles may add $25-$100, or may set a higher minimum job price. Some companies combine nearby appointments, so a flexible schedule can reduce the impact of travel. These regional ranges are estimates rather than fixed local rates; the same chip can receive different quotes depending on a shop’s minimum charge and schedule.
When comparing estimates, ask whether each contractor includes the same work. One quote may include travel and polishing, while another lists those items separately. Local sales tax can also affect the final amount, and some businesses charge a separate diagnostic or onsite assessment fee of $0-$75.
Local minimum charges can matter more than the cost of the resin itself. Two or three written quotes are most useful when they describe chip size, finish, color matching, polishing, travel, and any warranty in comparable terms.
How long a granite chip repair takes and what labor covers
Most single-chip repairs take about 1-2 hours of hands-on work, with additional curing time that may keep the countertop out of use for several hours. A larger or unusually visible repair can take 2-4 hours. The technician may need to return or allow an extended cure before final polishing, depending on the product and the depth of the fill.
One specialist can usually handle an isolated chip; a second worker is uncommon unless the job includes heavy slab handling or broader countertop work. Labor charges can appear high relative to the short visit because the service provider must carry stone-specific tools and color materials and may not be able to schedule several repairs in one home each day.
For a simple job, confirm when the surface can be cleaned, used, or exposed to water. A repair near a sink may need a longer cure before regular use. If the countertop is still under an installer or fabricator warranty, checking its terms first may prevent a separate repair bill or avoid affecting coverage.
Plan for a short appointment but allow for curing time before using the repaired area normally. A quote should state whether the price covers one visit or any required return trip.
Three realistic granite chip repair quotes
These examples show how chip size, finish work, and travel can change the total. They are illustrative estimates, not guaranteed local bids.
| Job details | Labor and service | Materials and finish | Estimated total |
|---|---|---|---|
| One 1/8-inch surface chip, uniform granite, easy access | $125-$175 | $15-$40 | $140-$215 |
| One 1/2-inch edge chip, speckled stone, color blending and polish | $200-$300 | $35-$90 | $235-$390 |
| Two chips, one 3/4-inch edge defect near sink, rural travel | $275-$425 | $50-$125 | $325-$550 |
In the first example, the low total assumes a nearby contractor and a simple color match. The second requires more shaping and may carry a higher minimum visit charge. The third includes a second defect and travel; a crack or loose slab would be priced separately.
For a quote check, compare the listed scope with the actual damage rather than choosing on the total alone. A written estimate that identifies each chip and the finish included makes it easier to judge whether a price is reasonable.
Lower the repair bill by bundling chips and controlling scope
Bundling several chips during one appointment is often cheaper than booking separate visits. The first repair may trigger a $100-$200 minimum, while additional simple chips can add roughly $25-$150 each. If there are defects in several rooms, sending clear photos together may help the contractor price them as one trip, provided the locations are within the same service area.
Keep the job focused on the damaged spots unless there is a clear reason to add broader restoration. Full-countertop polishing or resealing may be unnecessary for one small chip; ask for separate line items so the repair can be priced without optional work. Likewise, avoid premium color blending for a low-visibility area if a basic fill is acceptable, but agree on the expected appearance before work starts.
Reduce scheduling and travel costs by choosing a standard appointment window rather than requesting same-day or after-hours service. Rush charges can add $50-$150 or more, especially if the technician must rearrange other jobs. Preparing the counter by clearing appliances and personal items can save time, but owners should not grind, sand, or chemically clean the chip before the technician arrives.
Request two or three itemized quotes and provide the same photos, dimensions, edge profile, and location for each. Ask about a minimum charge, travel fee, polishing, cure time, and warranty. A warranty may cover the repair material or workmanship for a limited period, but it usually does not cover new impact damage.
The most dependable savings come from combining repairs, avoiding rush scheduling, and declining work that is not needed for the chip. A realistic comparison should balance price with the repair method and the finish the contractor expects to achieve.