Gutter and Fascia Replacement Cost Guide 2026

Homeowners typically pay a combined price for gutter and fascia replacements that reflects material choice, house size, roofline complexity, and labor. The main cost drivers are gutter material and size, fascia board condition, and any trimming, painting, or permit needs that apply.

Cost and price data are shown in ranges to reflect variations across homes and regions. The figures below assume a mid-sized house with standard 5 inch gutters and intact but aging fascia boards.

Item	Low	Average	High	Notes
Gutters (materials and install)	1,300	2,000	4,000	Aluminum 5 inch typical; seamless options higher
Fascia boards (replacement)	600	1,800	4,200	Includes removal and install; painting may add
Gutter guards or screens	150	500	1,600	Optional add-on
Labor (combined)	1,200	2,400	5,000	Hourly crew rates vary by region
Permits, disposal, and debris removal	50	400	1,000	Region dependent
Total project	3,200	6,000	12,000	Assumes standard home with moderate complexity

Overview Of Costs

Typical cost range for a full gutter and fascia replacement in the United States spans from a low around a few thousand to near six figures in rare cases, with most projects landing in the mid range. For budgeting, consider per linear foot pricing and total project price. Assumptions: region, specs, labor hours.

Cost Breakdown

Materials	Labor	Equipment	Permits	Delivery/Disposal	Warranty	Overhead	Contingency	Taxes	Total
Gutters and fascia materials	Labor for removal and install	Scaffolding or lift rental	Permits if required	Disposal of old materials	Material and workmanship	Shop overhead	5–10%	Varies by state	Ranges shown in rows above

Factors That Affect Price

Material selection and complexity heavily steer price. Aluminum gutters are most common and cost less than copper or zinc. Seamless gutters reduce leaks but raise material and fabrication costs.

Rafter and fascia condition and the need to repair or replace damaged fascia add labor and materials. Roofline complexity such as multi-hip roofs or long runs increases install time.

Labor rates and region vary by metro area. Urban vs rural pricing can shift totals by up to 20–40 percent in some markets.

Ways To Save

Bundle projects when replacing gutters and fascia to reduce trip charges and equipment rentals. Choose standard 5 inch gutters to balance cost and performance.

Stock materials and schedule during off peak season to secure favorable rates. Seek warranties that cover both materials and workmanship for long term savings.

Regional Price Differences

Three regional snapshots show typical deltas in price. In the Northeast, higher labor and material costs can push total by +5 to +12 percent versus the West. The Midwest often sits near the national average, while the South may run 5 to 15 percent lower due to lower labor rates. Assumptions: standard 150 ft gutter run, 1,200 sq ft fascia board area.

Labor, Hours & Rates

Typical crew composition includes two installers and a supervisor for a standard home. Installation time generally ranges from 1.5 to 3 days for a 1,600 to 2,400 sq ft house, depending on attic access and fascia condition. Estimate by labor hours × hourly rate to cross-check quotes.

Real-World Pricing Examples

Scenario cards illustrate common outcomes. Assumptions include standard 5 inch gutters, aluminum material, normal fascia, and good access.

Assumptions: region, specs, labor hours.

Summary notes in this guide are intended to help buyers form a defensible budget with clear low–average–high ranges. For homeowners planning replacement, obtaining multiple quotes that itemize materials, labor, and disposal helps validate pricing.