Guttering and fascia replacement typically costs $1,800-$6,000 for a home with 150-200 linear feet of roof edge, with a national midpoint near $3,500. Final pricing depends on gutter material and size, fascia damage, roof height, labor rates, and whether old materials need removal or disposal.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Combined replacement | $1,800 | $3,500 | $6,000 | Typical 150-200 linear feet |
| Gutters installed | $6 per linear ft | $11 per linear ft | $20 per linear ft | Material, size, and access affect rate |
| Fascia replacement | $5 per linear ft | $9 per linear ft | $18 per linear ft | Includes common board and labor ranges |
| Removal and disposal | $150 | $400 | $900 | Depends on material volume and access |
What homeowners pay for 150-200 linear feet
For a straightforward job on a one-story home, combined gutter and fascia replacement commonly runs $12-$30 per linear foot. That range assumes standard aluminum gutters, ordinary fascia boards, accessible eaves, and no extensive roof-edge repairs. A typical 150-200-foot project therefore lands around $1,800-$6,000, with a representative quote near $3,500.
Small homes or partial replacements may cost less in total, though contractors often have minimum charges of $300-$800. Larger homes, two-story elevations, custom gutter profiles, or widespread wood rot can push the total above $6,000. Assumptions: average U.S. labor rates, standard materials, normal access, and replacement along the listed roof edge.
For budgeting, measure the roof edge rather than the home’s floor area; the linear footage is the most useful starting point.
How fascia boards, gutters, and labor shape the quote
Quotes usually combine material, installation, removal, and job-specific charges. Ask whether the price includes new downspouts, corners, hangers, fascia wrap, and disposal; these may be listed separately. The ranges below are typical installed or project charges, not fixed national rates.
| Quote item | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Aluminum gutters | $6-$15 | Gauge, profile, seamless fabrication | Per linear ft |
| Premium copper gutters | $20-$40 | Metal price, soldered joints, custom work | Per linear ft |
| Fascia board and installation | $5-$12 | Wood type, board size, height | Per linear ft |
| Aluminum fascia wrap | $4-$9 | Color, bends, existing board condition | Per linear ft |
| Downspouts and accessories | $8-$20 | Material, length, outlets, elbows | Per linear ft |
| Removal and disposal | $150-$900 | Old system size and disposal needs | Per project |
Labor may be built into per-foot pricing or billed separately. When itemized, gutter and fascia crews commonly charge $50-$100 per worker-hour, with a small crew handling many standard homes in one day. A line-item estimate helps reveal whether a low total leaves out removal, downspouts, or replacement of damaged wood.
Compare the included work and material specifications, not just the bottom-line total.
Which roofline conditions push combined pricing upward
Fascia condition is a major uncertainty because rot can remain hidden behind gutters or trim. Replacing a few isolated sections may add $100-$500, while extensive decay, damaged rafter tails, or sheathing repairs can add $500-$2,000 or more. A contractor should identify the affected length and price structural repairs separately from the standard fascia replacement.
Height and access also change the labor estimate. Two-story eaves often add about 10%-25% compared with an accessible one-story installation; steep ground, landscaping, or limited ladder placement can add more. Gutter capacity matters as well: standard 5-inch gutters are common, while 6-inch gutters may cost roughly 10%-25% more and can be appropriate for large roof areas or heavy runoff.
Long runs and complex corners require more outlets, miters, and labor. For example, a roof edge with several inside and outside corners can cost more per foot than a simple straight run. Changing from sectional gutters to seamless aluminum may also raise the price, but fewer joints can reduce leak-prone connections.
Get a written allowance for hidden rot and specify the per-foot rate for any additional fascia discovered after removal.
How long a 150-foot fascia and gutter job takes
A standard one-story replacement covering 150-200 linear feet often takes a three-person crew about 6-10 hours, assuming fascia is sound and the roofline is easy to reach. A two-story home, complex corners, or board repairs can extend the work to one or two days. Seamless gutters are typically formed on-site, so the crew’s equipment and setup time are part of the installation charge.
Labor pricing varies by region and contractor. In many markets, labor accounts for roughly 35%-55% of a combined project quote. Urban areas with higher wages may run 10%-25% above typical suburban pricing, while rural locations can be less expensive but may have travel or minimum-call charges of $50-$200.
Scheduling can affect cost when a leaking gutter or storm damage requires urgent service. Routine replacement booked outside peak periods may be easier to schedule than work during heavy spring or fall demand. Ask whether the quote includes a return visit if rain delays installation or exposes concealed damage.
Confirm crew size, expected workdays, and whether labor for fascia repairs is included before approving the estimate.
What three common replacement quotes might include
These examples show how scope changes the total. They use typical U.S. installed prices and assume no major structural repairs; actual bids vary with local wages, roof access, and product availability.
| Example | Scope | Rate or allowance | Estimated total |
|---|---|---|---|
| Small ranch | 120 linear ft; aluminum gutters and fascia board | $18 per ft plus $250 removal | $2,410 |
| Average two-story home | 180 linear ft; 6-inch gutters, fascia, and downspouts | $25 per ft plus $500 access and disposal | $5,000 |
| Rot repair and premium finish | 200 linear ft; partial rafter-tail repair and copper gutters | $35 per ft plus $1,200 repairs | $8,200 |
For the ranch example, about 6-8 crew hours may be sufficient if the fascia is accessible and sound. The two-story example allows for slower setup and work at height. The premium case is not a typical aluminum replacement; copper and carpentry repairs account for its higher figure.
Use project examples as scope comparisons, not as a substitute for measuring the actual roof edge.
Does aluminum fascia wrap cost less than replacing boards
Aluminum wrap is often installed over sound fascia and can cost about $4-$9 per linear foot, excluding any needed board repairs. It protects the wood surface and avoids painting, but it does not correct rot or weak attachment underneath. If the wood is soft, warped, or pulling away, replacing the damaged board first is generally necessary and may bring the combined fascia work to $8-$18 per foot.
Vinyl fascia products can cost around $5-$12 per linear foot installed, depending on profile and backing condition. Wood remains common where a matching painted finish is needed; materials and labor together often fall near $5-$12 per foot for straightforward replacement, with premium lumber or detailed trim costing more. Aluminum gutters are usually less expensive than copper, while copper can reach $20-$40 per foot installed.
Repair may be practical when only a short run is damaged and the remaining system is secure. Gutter repairs often cost $150-$450 for a service visit or localized work, while fascia patching may be $200-$700 depending on access and carpentry. A full replacement is easier to justify when leaks, loose sections, and wood damage occur along multiple runs.
Wrapping fascia is a finish option, not a repair for decayed boards; confirm the substrate condition before comparing bids.
When permits and roof-edge repairs add to the price
Replacing gutters and fascia alone often does not require a building permit, but local rules differ. A permit may apply when the project includes structural rafter-tail work, changes to drainage, or repairs tied to a larger roof renovation. Permit and inspection charges, where required, may add $50-$500. The contractor should identify who obtains permits and whether the fee is included.
Some projects reveal issues beyond the visible gutter line, such as damaged soffits, loose drip edge, or water-stained siding. Replacing short sections of soffit may add $8-$20 per linear foot, while roof-edge metal or flashing work can add roughly $5-$15 per linear foot. These are separate scope items, so the estimate should distinguish them from fascia and gutter labor.
Homeowners may also need to adjust downspout discharge to prevent water from collecting near foundations. Extensions commonly cost $10-$40 each; buried drainage piping is a larger project and should be priced separately. Rebates for this work are uncommon, although local stormwater programs may occasionally support drainage improvements.
Ask the contractor to document any code-related or concealed repairs as a change order before expanding the project.
Ways to control gutter and fascia replacement spending
Measure the full roof edge and request separate pricing for gutters, fascia boards, fascia wrap, downspouts, and disposal. This makes it easier to compare equivalent bids and decide whether sound sections can remain. If one elevation is damaged, a phased replacement may be less costly than replacing every run at once, provided the old gutters still drain properly and match the new system.
Choose a standard-color aluminum system when appearance and service life meet the project’s needs. Specialty metals, custom colors, oversized profiles, and decorative accessories can add substantial expense. Avoid paying to wrap fascia that still needs structural repair, and do not assume a larger gutter is necessary without considering roof area, rainfall, and existing overflow patterns.
Prepare access by moving patio furniture, trimming obstructive branches where practical, and ensuring the crew can reach the eaves. Obtain at least three written estimates from insured contractors, with linear footage, product gauge, gutter size, downspout count, disposal, and repair allowances listed. Timing replacement before an active leak or storm emergency can also avoid rush charges.
The clearest savings usually come from controlling scope and comparing like-for-like specifications, not choosing the lowest quote without checking exclusions.