A Hampton H300 wood stove typically costs about $3,000-$4,500 for the stove alone when available new through a dealer, while a complete installation can bring the project to roughly $5,000-$9,500. The final price depends on whether the model is still available locally, chimney condition, hearth work, labor rates, and required permits.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| H300 stove only | $3,000 | $3,750 | $4,500 | Dealer pricing varies; used units may cost less |
| Chimney liner and connector | $900 | $1,800 | $3,200 | Depends on height, diameter, and existing chimney |
| Professional installation | $1,000 | $1,900 | $3,500 | More for difficult access or extensive hearth work |
| Installed project total | $5,000 | $7,200 | $9,500 | Assumes a standard residential installation |
What a Hampton H300 stove and installation usually cost
The H300 is a medium-size freestanding wood stove in Regency’s Hampton line. A new unit, if a dealer can source one, may be quoted around $3,000-$4,500 before tax, delivery, or installation. Availability can be limited, so a current quote may instead cover remaining inventory, a comparable replacement model, or a used stove.
A complete project commonly falls near $5,000-$9,500 when it includes the stove, connection to a suitable chimney, basic hearth protection, labor, and routine inspection. Existing code-compliant chimney infrastructure can keep a project below that range; a new insulated chimney, roof work, or major floor protection can push it higher.
Budget about $7,200 for a typical professionally installed H300 project, with the chimney and site work creating the widest spread. A stove-only advertised price should not be treated as the installed price.
Assumptions: U.S. dealer or contractor pricing, standard installation access, and no major structural repairs.
How the stove, chimney liner, and labor shape the quote
Ask the installer to separate the appliance price from venting, hearth materials, labor, permits, and any removal. That makes it easier to compare quotes that include different amounts of chimney work or site preparation.
| Quote component | Typical price | Common pricing basis | What changes the charge |
|---|---|---|---|
| H300 appliance | $3,000-$4,500 | Per stove | Availability, finish, dealer inventory |
| Connector pipe and fittings | $250-$700 | Per connection | Pipe length, elbows, gauge, ceiling configuration |
| Insulated chimney liner | $900-$2,500 | $60-$130 per ft installed | Chimney height, diameter, liner type, access |
| Hearth pad or floor protection | $300-$1,200 | Per installation | Required dimensions and selected material |
| Labor and commissioning | $1,000-$3,500 | $75-$150 per hour | Removal, access, crew size, testing |
| Permit and inspection | $50-$400 | Per permit | Municipality and inspection requirements |
Venting is often the largest cost after the stove itself. A stainless-steel liner may be required when an existing masonry chimney is oversized, damaged, or unsuitable for the appliance. A new exterior chimney can cost more than a liner because it may need insulated sections, wall supports, flashing, and a cap.
Labor estimates commonly use . A straightforward replacement may take 6-10 hours; a new chimney route or substantial hearth installation can require 12-24 hours or multiple visits. Delivery, old-stove removal, and disposal may appear as separate line items rather than being included in the installation fee.
Which H300 specifications and site conditions raise the price?
Chimney dimensions and route are major quote drivers. A liner run of 15-20 feet may cost roughly $900-$2,500 installed, while a run longer than 25 feet, an offset flue, or difficult roof access can add several hundred dollars or more. The installer must confirm that the flue diameter and chimney configuration match the appliance requirements.
Hearth size also matters. If the existing noncombustible floor protection does not meet the stove’s clearance and ember-protection requirements, a larger pad or custom masonry work may add $300-$1,500. Moving a stove farther from combustible walls can require additional connector pipe, shielding, or a revised room layout.
The H300’s roughly 2.3-cubic-foot firebox and heating capacity are often described for spaces up to about 2,100 square feet, but actual performance depends on insulation, ceiling height, climate, and wood quality. A home with more than 2,000 square feet of open living area, poor insulation, or long cold spells may require a different sizing assessment, not simply a higher-priced installation package.
Confirm the exact model plate, chimney diameter, and required clearances before approving a quote. If a quote assumes a standard 6-inch connection or a particular hearth footprint, those assumptions should be checked against the actual stove documentation and local code.
Where homeowners can trim the installed H300 price
Keep the project to the necessary scope. If the chimney passes inspection and can accept the correct liner, retaining it may cost less than installing a new chimney. Avoid paying for cosmetic hearth upgrades or decorative surrounds unless they are needed for required protection or are part of the desired finish.
Request separate prices for the stove, liner, connector, hearth, removal, and permit. Compare at least two written estimates with the same venting assumptions and materials. A low bid that omits a liner, roof flashing, or inspection can be more expensive after change orders.
Use the existing compliant hearth and chimney where the installer confirms they are safe and suitable. Homeowners can often clear the work area and arrange convenient delivery access, but stove connection, chimney work, and code checks should be handled by qualified professionals.
Ask whether the dealer has verified remaining inventory, floor models, or a comparable current Hampton-line unit. A floor model may be discounted, but check for shipping damage, missing parts, warranty terms, and whether the exact model remains eligible for installation and local approval.
How U.S. location changes chimney and installation quotes
Labor and permit costs vary substantially by market. In high-cost Northeast and West Coast cities, a similar installation may run about 10%-25% above a national midrange estimate. Rural areas and smaller markets can be 5%-15% lower, although limited installer availability or long travel distances can erase the savings.
Climate affects the type of work rather than setting a fixed stove price. Cold-weather areas may have more demand before winter, and contractors may charge more for short-notice scheduling. In regions with strict emissions rules or local restrictions on wood burning, the available appliance choices and approval process can also differ.
Use local written quotes for the chimney work instead of applying a single national labor rate. Ask whether sales tax, travel, roof access equipment, and inspection fees are included. For a remote property, delivery and crew travel can add $100-$500 or more.
How long H300 installation takes and what labor covers
A replacement on a prepared hearth with an acceptable chimney may take one workday, typically 6-10 hours for a small crew. A project involving liner installation, difficult roof access, hearth construction, or a new chimney can take 1-3 days, sometimes split across separate visits for inspection or masonry work.
Installer rates often fall around $75-$150 per labor hour, though many companies quote a fixed project fee. A two-person crew working 8 hours at an effective combined rate of $150-$250 per hour represents roughly $1,200-$2,000 in labor before specialized equipment or subcontracted roof work.
Confirm whether the installation price includes a draft check, final safety review, and customer operating instructions. Removal of an existing stove may add $150-$500, while heavy masonry units or stairs can increase handling charges. If the chimney needs cleaning before inspection, cleaning may cost another $150-$400.
When a used H300 or another stove costs less
A used H300 may be listed for about $800-$2,500, depending on age, condition, completeness, and local demand. That price does not include inspection, transport, parts, or installation. A damaged firebox, worn door gasket, cracked refractory component, or missing baffle can reduce the value of a bargain quickly.
Before buying used, have a qualified stove professional inspect the unit and confirm that it can be installed under current local rules. Some jurisdictions restrict older or uncertified wood-burning appliances. Confirm that the seller provides the model and serial information, manuals, and all required components; a stove without these details may be difficult to approve or service.
Compare the used purchase price plus repairs and installation against a new, currently supported stove. A used unit costing $1,500 can reach $3,000-$5,000 after repair, transport, and standard installation. A newer comparable stove may cost more upfront but offer a current warranty, available replacement parts, and a simpler compliance check.
Permits, inspections, and incentives that affect the final bill
Permit charges commonly range from $50-$400, but some municipalities require separate building and mechanical permits or a post-installation inspection. The installer should identify applicable rules before work begins, including required clearances, floor protection, chimney height, and any local restrictions on wood-burning appliances.
Some utilities or state programs periodically offer incentives for qualifying high-efficiency wood or pellet heating equipment, but eligibility changes by location and product. Do not assume a Hampton H300 qualifies for a rebate or tax benefit. Confirm current program terms, model certification, installation requirements, and purchase-date rules with the administering agency or utility before relying on a discount.
Get permit responsibility and inspection costs stated in writing. A quote that excludes code corrections may rise if the chimney, hearth, or nearby combustible surfaces fail inspection. Any needed masonry repair, roof flashing replacement, or clearance modification should be priced separately before installation proceeds.
For budgeting, keep a contingency of about 10%-15% of the quoted project total when the chimney has not yet been inspected or the stove is being installed in an older home. That reserve can cover hidden liner damage, extra hearth work, or an unavailable part without treating those costs as guaranteed.