Hardie fascia board price typically runs $2-$5 per linear foot for materials, or about $8-$18 per linear foot installed. The final quote depends on board width, roofline access, removal of old fascia, regional labor rates, and whether gutters or trim also need work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Hardie fascia material | $2/linear ft | $3.50/linear ft | $5/linear ft | Board only; width and finish affect price |
| Installed fascia | $8/linear ft | $12/linear ft | $18/linear ft | Labor and standard fastening included |
| 100 linear ft replacement | $800 | $1,200 | $1,800 | Assumes normal access and no major rot |
| Old fascia removal | $1/linear ft | $2/linear ft | $4/linear ft | May include disposal |
What Hardie fascia board costs per linear foot
For a straightforward replacement, homeowners commonly pay $8-$18 per linear foot for installed Hardie fascia. That works out to $800-$1,800 for 100 linear feet. Material-only pricing is usually $2-$5 per linear foot, before fasteners, caulk, paint, or delivery.
Most standard projects land near $12 per linear foot installed. The estimate assumes common 6- to 8-inch-wide fiber-cement fascia, typical U.S. labor rates, and accessible eaves. A contractor may quote by the project rather than by the foot, especially when gutter removal or roof-edge repairs are involved.
Assumptions: Standard-width boards, Midwest labor rates, normal access, and no extensive sheathing or rafter-tail repairs.
How board, labor, and removal shape the quote
Labor, board, and tear-off make up most of the bill. Costs vary with crew size, roof height, and how carefully existing gutters must be removed and reinstalled. The table shows typical installed cost components per linear foot; these are quote elements, not necessarily separate charges.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Hardie board | $2/linear ft | $3.50/linear ft | $5/linear ft | Standard fascia stock |
| Installation labor | $4/linear ft | $6/linear ft | $10/linear ft | Cutting, fastening, and sealing |
| Removal and disposal | $1/linear ft | $2/linear ft | $4/linear ft | Old board and debris |
| Finishing supplies | $1/linear ft | $1.50/linear ft | $3/linear ft | Caulk, primer, paint, fasteners |
| Gutter handling | $2/linear ft | $4/linear ft | $7/linear ft | Detach and reinstall as needed |
Ask whether the quote includes removal, finishing, and gutter work. If labor is billed by time, a rough calculation is ; fascia installers commonly charge about $50-$100 per hour, though many price the whole job.
Which board widths and roof details raise the price
Wider boards use more material and may take longer to handle. A 6-inch board often stays near the lower material range, while an 8- to 12-inch profile can cost more or require special ordering. Confirm the actual board dimensions and product line in the estimate, since “Hardie fascia” may refer to different fiber-cement trim products.
Roof access and repair scope can change labor more than the board itself. A single-story eave with clear ground access may fit the lower rate; second-story work, steep roof edges, or obstructed gutters can add roughly 15%-40%. If rot extends beyond fascia into rafter tails or roof sheathing, repairs may add $100-$500 or more per affected area.
Long, straight runs are usually less costly per foot than many short sections with corners, returns, or intricate rooflines. Projects over 200 linear feet may receive a lower unit rate, while small repairs can face a minimum charge of $250-$500.
Regional labor rates shift installed fascia pricing
Prices tend to run about 10%-20% above national midrange in high-cost metro areas and parts of the Northeast, West Coast, and Hawaii. Rural markets and lower-cost regions may come in roughly 5%-15% below the midrange, though travel or minimum-job charges can erase the difference on small projects.
Compare local quotes using the same footage and scope. A $12-per-foot bid that includes tear-off and finish work may be a better value than a lower rate that excludes those tasks. Ask each contractor to identify the board profile and whether sales tax or delivery is included.
How long a 100-foot fascia replacement takes
A two-person crew may need about 1-2 days for 100 linear feet when access is easy and framing is sound. Removal, cutting, installation, caulking, and cleanup are typical tasks. Painting or complex gutter coordination may extend the schedule, and weather can delay exterior work.
Labor hours rise when the job combines fascia with gutter or roof-edge repairs. Contractors may charge a $150-$300 service or mobilization minimum for a short repair, so combining separate fascia sections can reduce the effective per-foot cost.
When wood fascia repair costs less than Hardie
Primed wood fascia often costs less upfront, commonly around $5-$12 per linear foot installed, while vinyl-covered or aluminum-wrapped options may range from $6-$14 per linear foot depending on the substrate and details. Hardie fiber cement is heavier and may cost more to install, but its material does not provide a food source for termites and resists rot when properly installed and maintained.
Choose a comparison based on full scope, not board price alone. If existing wood is sound and damage is limited, localized repair may cost $150-$500. When boards are extensively soft or peeling, replacing the affected run can prevent repeated patching expenses.
Three replacement estimates for common rooflines
These examples illustrate how footage and access affect a quote. Actual prices depend on local labor, finish requirements, and the condition behind the fascia.
- Small porch, 40 linear feet: $320-$720 installed, assuming one-story access and limited removal.
- Typical house, 100 linear feet: $800-$1,800 installed, including standard board and ordinary tear-off.
- Two-story home, 180 linear feet: $1,800-$3,600, allowing for added ladder work, gutter handling, and more finishing.
Example assumptions: Standard Hardie trim, sound framing, no permit requirement, and no extensive roof or gutter replacement.
Where homeowners can trim the Hardie fascia bill
Measure the full run and group repairs before requesting quotes; a contractor may charge a minimum for a small isolated section. Keep sound gutters in place where practical, but do not skip necessary removal if fasteners or the roof edge cannot be inspected safely. Supply or paint materials only when the installer confirms compatibility and warranty terms.
Get at least three written bids with matching linear footage and inclusions. Compare board width, removal, disposal, finish coats, gutter work, and repair allowances. Avoid paying for broader trim replacement when only fascia is damaged, and ask for a separate price for any concealed-rot contingency.