A used Hearthstone Phoenix 8612 typically costs about $500-$1,800, with many complete, serviceable stoves offered near $1,000. The model is discontinued, so condition, local availability, moving distance, and the cost of a code-compliant chimney and installation can matter more than the original retail price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Phoenix 8612 stove | $500 | $1,000 | $1,800 | Price varies with condition, completeness, and local demand. |
| Professional installation | $800 | $1,800 | $3,500 | Assumes an existing, suitable chimney at the low end; new venting raises cost. |
| Typical installed project | $1,500 | $3,000 | $5,500+ | Includes a used stove and ordinary installation; major chimney work can exceed this. |
| Inspection and service | $150 | $300 | $600 | Basic inspection or modest repairs; replacement parts are additional. |
What a Phoenix 8612 Usually Costs Used
The Phoenix 8612 is a discontinued HearthStone soapstone wood stove. Buyers should generally budget $500-$1,800 for a used unit, rather than rely on a current new-stove list price. A lower-priced stove may need seals, firebrick, glass, or professional inspection; a clean, complete example with documented care can command more.
A realistic average purchase budget is around $1,000 before delivery, repairs, or installation. The quoted stove price alone does not establish that the unit is safe, complete, or suitable for a particular home. Buyers should confirm the exact model and inspect the stove before committing.
The Phoenix is a freestanding, non-catalytic wood stove with soapstone panels. Its design and nominal heating claims do not guarantee performance in every home. House insulation, ceiling height, wood moisture, layout, and local climate all affect usable heat and fuel consumption.
Assumptions: U.S. private-party or local dealer resale, a complete used stove, and no major structural or chimney repairs.
How Stove, Labor, and Venting Shape the Quote
A stove quote may cover only the appliance. A full project can add delivery, hearth protection, connector pipe, chimney components, labor, inspection, and repairs. The ranges below are planning estimates; local code requirements and site layout determine the actual scope.
| Cost item | Low | Typical | High | What changes the price |
|---|---|---|---|---|
| Used stove | $500 | $1,000 | $1,800 | Condition, completeness, seller, and local inventory. |
| Labor | $400 | $900 | $1,800 | Removal, hearth work, access, and crew time. |
| Chimney and connector | $300 | $1,200 | $3,500+ | Existing approved chimney versus new insulated chimney. |
| Hearth and shielding | $150 | $500 | $1,500 | Required clearances and whether a suitable hearth exists. |
| Inspection, delivery, disposal | $150 | $400 | $900 | Travel, carrying distance, old-stove removal, and local fees. |
Professional installation commonly runs $800-$1,800 when the home already has a compatible chimney and needs limited changes. A new chimney, roof penetration, or substantial hearth modification can push labor and materials above $3,500. Labor may be billed as a project price or at roughly $75-$150 per hour, depending on location and trade.
Ask for a written quote that separates the stove, venting, labor, and any inspection or removal charge. This makes it easier to compare bids and spot missing safety work.
Firebox Condition and Chimney Length Change the Price
Condition is the main variable in a used Phoenix 8612 purchase. A clean exterior does not prove that internal parts are sound. Ask an experienced stove technician to inspect welds, firebox surfaces, door seal, glass, baffle, and all parts that direct combustion gases. Repair availability may be less predictable for a discontinued model than for a current stove.
Replacement gaskets or minor service may cost about $100-$350 in parts and labor. More involved work, such as replacing damaged firebox components or restoring a neglected stove, can reach $500-$1,200 or make another stove a better purchase. Do not assume that a seller’s claim of “working” means it passes inspection or meets current installation rules.
Chimney requirements can change the total by thousands of dollars. A short, straight run through an existing approved chimney is usually less expensive than a new insulated chimney extending through multiple floors or above a roofline. A project needing 15-25 feet of new chimney may add roughly $1,200-$3,500 or more, including related installation work.
Clearance and hearth requirements also affect the job. If the stove location lacks required protection or safe distance from combustible walls, a new hearth pad or wall shield may add $150-$1,500. Local building and fire codes, the stove’s listing information, and the chimney system should guide the design; dimensions should not be guessed from a sales listing.
Price the stove only after checking the firebox and confirming the chimney and clearances can legally serve it. Otherwise, a seemingly inexpensive unit can become an expensive project or prove unsuitable for installation.
Buying a Phoenix 8612 Online Versus Locally
Local private-sale listings often fall around $500-$1,500, with the buyer responsible for inspection, loading, and transport. A dealer or stove shop may ask $1,000-$1,800 for a checked or cleaned unit, sometimes with limited service support. Dealer pricing is not a guarantee of a warranty, so buyers should get any coverage and exclusions in writing.
Online listings can widen the selection but add shipping, crating, and damage risk. Freight for a heavy stove may cost $300-$800 or more, and residential delivery may not include moving the stove inside. A local pickup can avoid freight but may require a suitable vehicle, several capable handlers, and safe lifting equipment.
A local inspection and pickup can be worth more than a lower online asking price. Before paying a deposit, verify that the stove is actually the 8612, request close photographs of the interior and exterior, ask what parts are included, and establish who bears the cost if transit damage occurs.
Check that the sale includes the legs or pedestal, door, handles, firebox parts, and any other components shown in the manufacturer’s documentation for the specific unit. Missing or damaged parts can be difficult to source for a discontinued model. A low price is less compelling if the stove cannot be safely assembled or serviced.
Installation Time and Chimney Work Set Labor Charges
A straightforward replacement using an existing, approved chimney may take a crew about 4-8 hours. A new installation with a chimney run, roof work, hearth changes, or removal of an old appliance may take 1-2 days, sometimes with separate visits for inspection or finishing work.
Installers may charge a minimum service fee of $150-$300 for an assessment or short visit. A full stove installation commonly totals $800-$1,800 in labor when the job is uncomplicated; complex access, steep roofs, long chimney runs, and structural changes can raise labor charges to $2,000 or more.
Moving the stove is a separate practical cost. Depending on distance and access, local delivery or moving can add $100-$400. Stairs, narrow hallways, long carries, or a need for specialized lifting equipment may bring the charge to $500 or higher. Confirm whether the quote includes carrying the stove into the home, positioning it, and removing packaging.
Have the installer inspect the site before treating an online labor estimate as a final quote. Ask whether the fee includes permits, chimney inspection, connection materials, commissioning, and cleanup, or whether those items will be billed separately.
Three Phoenix 8612 Budget Examples From Sale to Setup
These examples show how the same stove can lead to different project totals. They are estimates, not fixed national rates, and assume the unit is serviceable unless repairs are listed. Local quotes should account for code, access, and the specific chimney.
| Scenario | Stove | Other work | Estimated total | Assumptions |
|---|---|---|---|---|
| Local pickup, existing chimney | $700 | $900-$1,400 | $1,600-$2,100 | Basic delivery, inspection, connector, and uncomplicated installation. |
| Dealer unit, modest service | $1,400 | $1,300-$2,000 | $2,700-$3,400 | Gasket or minor service, local transport, and existing approved chimney. |
| Private-sale stove, new chimney | $600 | $2,500-$4,500 | $3,100-$5,100 | New insulated chimney, roof work, installation, and inspection. |
In the first example, the modest stove price leaves room for a professional inspection and proper connection. In the third, the chimney—not the appliance—dominates the budget. If the firebox needs significant work, add roughly $500-$1,200 or reconsider the purchase before spending on installation.
Assumptions: Typical U.S. residential labor, standard access, and no major framing or roof repair. Rural travel, urban labor rates, and local code work may change totals.
Regional Labor Rates and Wood Stove Availability
Labor and delivery are often higher in dense metropolitan areas, where contractor rates and travel logistics can add about 10%-25% compared with a lower-cost rural market. Rural buyers may pay less per hour but face longer travel charges, fewer certified or experienced installers, and limited access to parts or service.
Used-stove prices also vary with climate and local supply. In cold regions with established wood-heating markets, demand can make a clean, ready-to-install Phoenix 8612 more expensive, especially ahead of winter. In mild regions, fewer interested buyers can reduce asking prices, but fewer local installers may raise the cost of fitting and servicing it.
These are directional differences, not guaranteed discounts. A quote in a high-cost area may include additional inspection, insurance, or permit work. Compare bids that cover the same chimney scope, safety checks, and materials rather than comparing only the hourly rate or appliance price.
Request at least two local installation quotes and compare their included work line by line. For a used stove, also compare the total delivered and installed cost with a current stove available through a local dealer.
Lowering the Phoenix 8612 Price Without Skipping Safety
The most reliable savings come from controlling the project scope, not omitting required chimney or clearance work. Confirm the installation location and chimney condition before buying. If a suitable, approved chimney already exists, the project may avoid the large expense of a new venting system.
Compare complete quotes from multiple qualified installers. Ask each to list inspection, labor, connector pipe, hearth changes, delivery, removal, permits, and chimney components separately. This reveals whether a low bid excludes essential work or a higher bid includes repairs that another contractor has not identified.
Buying locally can reduce freight, and scheduling outside the busiest pre-winter period may improve installer availability. However, seasonal savings are not assured, and waiting until cold weather to arrange an inspection can create delays. Allow time to assess the stove before purchase rather than accepting a rushed sale.
Choose only necessary materials and upgrades, but do not substitute incompatible venting or omit required hearth protection. If a used Phoenix needs extensive repairs, compare that repair quote with the price of another inspected used stove or a new model. A replacement may cost more upfront but offer easier parts access and a current manufacturer warranty.
Keep the safety inspection and code-compliant installation in the budget, even when reducing other expenses. A stove that cannot be safely installed is not a bargain, regardless of its asking price.