A new Hilti TE 30 rotary hammer typically costs about $900-$1,700, depending on the model, included accessories, seller, and warranty. Used tools can cost considerably less, while batteries, dust-control equipment, and bits can raise the checkout total. For a standard corded TE 30 setup, budgeting around $1,200-$1,400 is a practical starting point.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New corded TE 30 tool | $900 | $1,300 | $1,700 | Tool configuration and seller affect pricing |
| Used corded TE 30 | $300 | $650 | $1,000 | Condition, age, and included case matter |
| Battery or kit additions | $150 | $350 | $700 | Varies by battery, charger, and kit contents |
| Common SDS-plus bit | $10 | $25 | $60 | Bit diameter, length, and grade affect price |
What a Hilti TE 30 usually costs to buy
For a new corded Hilti TE 30 rotary hammer, expect roughly $900-$1,700 for the bare tool or a basic package. A typical transaction falls near $1,300. Prices depend on the precise TE 30 model, availability, whether the package includes a case or accessories, and whether the quote comes from Hilti or a third-party seller. Model names and bundles can vary by market, so the tool’s nameplate and included-items list should be checked before comparing offers.
Used examples often list for $300-$1,000. A clean, tested tool with a case and intact cord may sell for $600-$800, while a worn tool, incomplete package, or older configuration can be cheaper. A low listing price does not establish that the hammer mechanism, clutch, chuck, or electronics work properly. Compare the exact model and package rather than treating every TE 30 listing as the same product.
Prices below are planning ranges, not fixed national retail prices. Local inventory, discounts, taxes, and shipping change the amount paid. A compact drilling setup with a few bits may add only $30-$100, while dust extraction and several larger bits can add hundreds. Assumptions: U.S. pricing, standard trade-grade tool, ordinary availability, before sales tax.
How the tool, bits, and dust gear shape the quote
A quote may include the hammer itself, a carrying case, drilling accessories, dust collection, and delivery. The table separates typical purchase components; package contents vary, and a listed kit may not include batteries or accessories unless stated. A buyer should confirm whether the quote is for a bare tool, a complete kit, or a bundle with compatible extraction equipment.
| Quote component | Low | Average | High | Price basis |
|---|---|---|---|---|
| TE 30 hammer | $900 | $1,300 | $1,700 | Per tool, new corded model |
| SDS-plus bits | $10 | $25 | $60 | Per common bit; specialty sizes cost more |
| Dust extraction accessory | $100 | $250 | $500 | Attachment or compatible collection setup |
| Case or replacement case | $40 | $90 | $160 | Per case, depending on availability |
| Freight or delivery | $0 | $25 | $100 | Per order; some sellers offer pickup |
| Sales tax | $0 | $80 | $180 | Varies by purchase price and location |
For a purchase rather than an installation project, labor is usually not part of the tool’s price. If a contractor is supplying the machine as part of a drilling job, labor may be billed separately by time or by hole. A basic service rate might run $75-$150 per hour, but travel, minimum charges, and the material being drilled change a job quote.
Accessories can be the difference between a tool-only price and a ready-to-work budget. For light concrete drilling, a small set of appropriately sized SDS-plus bits may be enough. Repeated drilling, overhead work, or dust-sensitive indoor work can require more durable bits or extraction equipment. Ask the seller to itemize the tool, accessories, shipping, and tax so the actual package premium is clear.
Which TE 30 model and drilling capacity change the price
TE 30 is a model family, not a guarantee that every listing has identical specifications. Corded and cordless configurations, model suffixes, included accessories, and regional product versions can differ. A cordless package may cost more than a bare corded tool because it can include batteries and a charger; verify the battery platform and count rather than comparing the kit price directly with a corded tool-only quote.
Drilling capacity also affects what accessories are needed. Small holes for anchors may use bits around 1/4-1/2 inch, while frequent holes of 5/8 inch or larger can call for longer or heavier-duty bits. Bits commonly range from about $10-$60 each, with longer, specialized, or premium options above that range. Larger diameter drilling may require a different tool class or method; confirm the manufacturer’s stated capacity for the specific model before buying.
A tool’s condition can matter more than its age alone. On a used unit, inspect the chuck, cord or battery contacts, selector switch, housing, side handle, and case. A repair or service visit can add roughly $100-$300 for a minor issue, and a major internal repair may not be economical. Match the model’s rated capacity to the hole sizes and materials in the work plan, then price the required bit set separately.
Why seller location, stock, and delivery shift the final price
There is no single regional price schedule for a TE 30, but local availability and shipping create practical differences. Buyers in major metro areas may have more dealers and pickup choices, while remote locations can face freight charges or fewer in-stock configurations. As a planning allowance, delivered prices may run 5%-15% above a comparable local pickup offer when shipping, handling, or limited availability applies.
Promotional pricing can narrow the gap. A dealer may discount a tool when it is bundled with bits, a case, or another Hilti product, while a third-party seller may advertise a lower price without the same warranty coverage or service access. Sales tax can add roughly 0%-10% depending on local rules. For a $1,300 purchase, that can mean approximately $0-$130 before any shipping fee.
Before paying, confirm whether the seller is authorized, whether the tool is new or refurbished, and what warranty applies to that exact sale. A lower marketplace price may exclude local service or include an incomplete kit. Compare delivered, tax-inclusive totals and warranty terms, not only the number shown beside the product name.
How a new TE 30 compares with used and cordless options
A used corded TE 30 at $300-$1,000 can save substantially if it is in working condition and the buyer does not need a new-tool warranty. The savings should be weighed against possible repair costs, missing accessories, and uncertain history. Buying from a seller who permits a functional test can reduce risk; a brief test should include the operating modes, trigger, chuck retention, and visible signs of excessive wear.
A cordless TE 30 package may be useful where power access is limited, but compare the complete kit against the corded tool. Batteries and a charger can add about $150-$700, depending on quantity and package. If compatible batteries are already on hand, a bare tool may be the lower-cost choice. If not, the apparent bare-tool price can understate the actual amount needed to start work.
For occasional light drilling, renting a rotary hammer may cost roughly $40-$90 per day, with deposits, bits, or damage coverage potentially extra. Buying can make more sense when the tool will be used repeatedly, but rental avoids storage and maintenance. For infrequent jobs, compare the full rental charge with the cost of a tested used tool rather than assuming new is the only option.
What three realistic TE 30 purchase budgets look like
A bare-tool purchase is the simplest case. A new corded TE 30 listed at $1,150, plus a $25 bit and $40 delivery, totals $1,215 before tax. At an illustrative 7% sales-tax rate, the final amount is about $1,300. This option fits a buyer who already has suitable accessories and does not need dust extraction.
A more complete concrete-drilling package could include a $1,350 tool, $90 in assorted bits, and a $220 dust accessory. With $35 delivery and 7% tax on a $1,695 subtotal, the total is about $1,850. The main cost increase comes from adding dust equipment and a broader bit selection rather than from labor.
A used-tool budget could use a tested TE 30 priced at $550, a $90 case or accessory replacement, and $30 delivery. With 7% tax on $670, the total is around $717. If inspection reveals a worn cord or damaged selector, the cost can rise quickly, so this scenario has more condition risk than buying new. These examples show why package contents and tax can move the final checkout total by several hundred dollars.
When repairs, rental, or another hammer make financial sense
A repair is worth pricing when a known issue is limited to a replaceable external part or minor service. Request a diagnosis and written estimate before authorizing work; a $100-$300 repair may be reasonable for a sound tool, but a costly internal repair on an older unit can approach the value of a working used replacement. The quote should distinguish diagnosis, parts, labor, and return shipping.
Rental is commonly economical for a one-day task, especially if the job requires a specialized tool that would otherwise sit unused. At $40-$90 per day, a few days of rental can still cost less than buying a new tool, though repeated projects may reverse that comparison. Add pickup time, extension cords or battery needs, bit charges, and the rental shop’s late-return policy to the calculation.
A different rotary hammer may fit the budget if the required drilling capacity is modest or if the job needs a larger system than the TE 30. Compare rated capacity, chuck type, impact performance, weight, and service support—not just purchase price. Choose repair when the diagnosis is limited and economical, and compare rental or replacement when the tool needs major internal work.
How to lower the TE 30 bill without losing needed capability
First, request separate prices for the tool, case, bits, dust accessory, shipping, and service coverage. Remove accessories already owned, but avoid buying a bare tool if the missing items must be purchased at full retail later. A written list makes a dealer bundle easier to evaluate and exposes duplicate accessories.
Second, compare at least two sellers using the exact model and package contents. Check whether a discounted listing is new, refurbished, or used, and whether its warranty is valid in the United States. A 5%-10% discount on a $1,300 tool saves roughly $65-$130, but a missing case or added freight can erase that difference.
Third, choose bits for the actual hole sizes instead of buying a large assortment that may go unused. For occasional work, purchase a few common diameters; for repeated drilling, compare the cost per bit and expected wear. Consider rental for a short project and a used purchase only when the condition can be verified. The most reliable savings come from controlling package scope and comparing complete, tax-inclusive quotes.