A Hilti TE 700-AVR typically costs about $1,700-$2,600 new when available, while used units often sell for $650-$1,500 and daily rentals run roughly $70-$150. The final price depends on tool condition, included chisels and case, seller availability, local labor rates, and whether the job needs a short rental or a full purchase.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New tool, tool-only | $1,700 | $2,150 | $2,600 | Availability and seller quotes vary |
| Used tool | $650 | $1,050 | $1,500 | Condition, service history, and accessories affect price |
| Daily rental | $70 | $110 | $150 | Before tax, deposit, and delivery |
| Repair allowance | $150 | $400 | $900+ | Depends on fault and parts availability |
| Replacement chisel | $35 | $75 | $160 | Type, length, and brand influence price |
Assumptions: U.S. pricing in USD, ordinary purchase or rental, and no sales tax unless noted.
What a Hilti TE 700-AVR Usually Costs New or Used
Plan on about $2,150 for a new tool-only purchase, or roughly $1,050 for a serviceable used unit. The TE 700-AVR is a corded SDS-Max demolition hammer with active vibration reduction; its price reflects a professional-duty tool rather than a light rotary hammer. Depending on stock and seller, a new unit can land around $1,700-$2,600 before tax. Some listings bundle a case, pointed chisel, flat chisel, or other accessories, so the headline price alone may not indicate the best value.
Used pricing is less predictable because age and wear matter more than cosmetic appearance. A working unit with a case and a recent inspection may cost $900-$1,500, while an older tool with uncertain service history may be listed for $650-$900. A low asking price can be offset by a damaged cord, worn tool holder, missing side handle, or an upcoming service bill. Ask the seller to demonstrate operation under load and provide any repair records.
For a used purchase, estimate the complete usable setup rather than the bare tool. A case, basic chisels, and immediate maintenance can add $100-$300; a seller’s package may include these items already. Buying from an authorized or established tool dealer can cost more than a private sale but may offer a return period or inspection. Confirm the exact model, voltage, plug, and included components before comparing quotes.
Price basis: tool-only estimates exclude sales tax, shipping, and optional accessories.
How Hilti TE 700-AVR Tool Quotes Break Down
The tool itself is usually the main expense; accessories, freight, and service can shift the delivered total by several hundred dollars. New-tool quotes vary by package, seller, stock, and whether the purchase includes a warranty or service arrangement. A buyer should request an itemized quote that identifies the tool model and each included accessory, rather than comparing only a single total.
| Quote component | Typical range | What changes the charge | Budget note |
|---|---|---|---|
| TE 700-AVR tool | $1,700-$2,600 | Stock, seller, package, and condition | Confirm new, refurbished, or used status |
| Chisels and accessories | $35-$160 each | Chisel type, length, and construction | Package sets may reduce per-piece price |
| Case or storage | $50-$180 | Replacement case or bundled case | Check whether it is included |
| Delivery or shipping | $0-$120 | Distance, carrier, and order size | Local pickup can avoid freight |
| Repair and service | $150-$900+ | Inspection, labor, and replacement parts | Ask for a written diagnosis before approval |
| Sales tax | About 0%-10.5% | State and local tax rules | Apply the local rate to taxable items |
For example, a $2,150 tool with $100 in accessories and $60 shipping totals $2,310 before tax. At a 7.5% sales tax rate, the final checkout amount would be about $2,483. A used tool may not include warranty coverage, and a private-sale price generally should not be compared directly with an inspected dealer unit without accounting for condition and return terms.
When a quote includes service coverage, check its term and exclusions. Coverage may not include consumables such as chisels, damage from misuse, or normal wear. If an offer includes a service plan or repair credit, assign it value only if the terms are clear and the tool is likely to be used enough to benefit.
How Chisels, Concrete Thickness, and Access Change the Price
Tool price is only part of the budget: material hardness, concrete depth, and the required chisel can affect both accessory spending and job time. A basic pointed or flat SDS-Max chisel commonly costs $35-$100, while specialized or longer chisels may reach $100-$160 or more. For occasional work, one suitable chisel can be enough; demolition involving both breaking and edge cleanup may require multiple shapes.
Concrete thickness is a practical scope threshold. Breaking a 2-4-inch slab in an open area is generally less demanding than removing a reinforced slab 6 inches or thicker. Thicker concrete can require more passes, additional labor, and separate cutting or removal equipment. Rebar, dense aggregate, and embedded utilities may also slow the work or require a different method. The TE 700-AVR is not a substitute for a concrete saw when clean edges or controlled cuts are required.
Access affects the overall bill even when the tool price stays fixed. A ground-level slab near a vehicle can be faster to clear than demolition in a basement reached by stairs or through a narrow doorway. Longer carry distances, limited working height, and occupied spaces add setup and cleanup time. For paid work, labor can run about $50-$100 per hour per worker, with location and trade specialization driving the range.
Power supply and duty cycle matter as well. The TE 700-AVR is a corded 120-volt tool, so long extension-cord runs or limited outlet access may require safer power planning. A contractor should verify the circuit and work area rather than assume a household outlet is suitable for continuous heavy use. Rental firms may also charge for damaged or missing accessories, so document the tool’s condition at pickup.
When a TE 700-AVR Rental Beats Buying
For a one-day or occasional job, renting at $70-$150 per day can cost far less than buying a new unit. A weekend rental may be priced as one to three daily rates, depending on the yard’s schedule and return rules, putting the tool charge around $140-$450 before tax and delivery. Weekly rates often fall near $250-$600, but the exact discount depends on local inventory and whether weekends count as billable days.
Buying becomes more competitive when the tool will be used repeatedly. At an average rental rate of $110 per day, 10 rental days total $1,100 before transport and accessory charges. That approaches the price of a good used unit, although ownership adds maintenance, storage, downtime risk, and resale effort. A new purchase at roughly $2,150 takes about 20 rental days to equal the tool cost alone; that simple comparison does not include resale value or repair expense.
Rental is also useful when the job’s scope is uncertain or the tool is needed for a single demolition phase. Ask whether the quoted rate includes a chisel, what the late-return charge is, and whether a damage waiver is available. Deposits may be $100-$500 or more and are generally refundable if the tool is returned in acceptable condition. Delivery may add $30-$120 each way, making pickup worthwhile when transport is practical.
For frequent professional use, ownership can limit scheduling delays and repeat rental trips. Still, a contractor should compare expected annual days of use with a realistic repair allowance. If the tool will sit idle for most of the year, renting may preserve cash and avoid storing a heavy corded tool and its accessories.
What U.S. Contractors Pay for Delivery and Repair
Repairs can make an inexpensive used listing costly, so condition and service access belong in the purchase estimate. A basic inspection or diagnosis may cost $50-$150, sometimes credited toward an approved repair. Replacing a cord, switch, or other relatively simple component may bring a repair into the $150-$400 range. More extensive internal wear, including damage to impact components or the tool holder, can push a bill to $500-$900 or higher.
Parts availability and the service provider affect repair time and price. An authorized service center may charge a higher labor rate than a local repair shop, but it may have model-specific procedures and parts access. Ask whether the estimate includes diagnosis, labor, parts, and shipping in both directions. If the repair estimate approaches half the price of a dependable used replacement, compare replacement options before authorizing work.
Delivery charges vary with distance and handling. Local equipment yards may charge around $30-$120 for delivery, while parcel shipping for a purchased tool can range from free to roughly $100, depending on seller terms and location. A heavy tool shipped across the country may require signature delivery or added packaging. Check for a restocking charge if a new purchase is returnable, and verify whether return freight is paid by the buyer.
For rentals, potential charges include late fees, cleaning fees, and replacement charges for missing accessories. Photograph the tool, cord, case, and chisel at pickup and return. Record the rental-hour or day cutoff; returning a few hours late may trigger a full additional day under the rental agreement.
Three TE 700-AVR Buying Scenarios With Realistic Totals
Comparing complete job budgets reveals why the lowest advertised price may not be the lowest usable cost. These examples use ordinary U.S. pricing assumptions, exclude unusual site conditions, and show different buying choices. Local quotes can be higher or lower, particularly where Hilti inventory is limited or freight is required.
| Scenario | Tool and scope | Labor or rental | Estimated total |
|---|---|---|---|
| One-day slab removal | One-day rental, basic chisel | 8 labor hours at $65-$90 per hour | $590-$970 |
| Used tool for recurring repairs | Used unit $900-$1,250, case and chisel $80-$180 | Inspection or service allowance $100-$250 | $1,080-$1,680 |
| New contractor purchase | New unit $1,900-$2,400, accessory set $100-$250 | Freight $0-$100, before tax | $2,000-$2,750 |
In the rental example, the $590-$970 total assumes one rental day at $70-$150, a modest chisel or supply allowance, and one worker for eight hours. Two workers can raise labor to roughly $1,110-$1,690, although a crew may finish faster. The estimate excludes concrete hauling, saw cutting, permits, and disposal fees.
The used-tool scenario assumes a demonstrated working unit rather than a repair project. A buyer who cannot test the tool should reserve more for service or choose a seller with a return policy. The new-purchase example allows for price variation and accessories, but not tax. At a 6%-9% combined tax rate, a $2,300 pre-tax package would add about $138-$207.
These figures are useful for comparing a tool purchase with a contractor’s demolition quote, but they are not interchangeable. A contractor price may include crew time, hauling, surface protection, and disposal. Request a written scope showing what is included before deciding that owning the hammer is cheaper.
How Regional Tool Supply Affects Hilti TE 700-AVR Prices
Local stock and labor typically create a wider price difference than a small variation in the tool’s advertised list price. In large metro areas with multiple tool suppliers, a new tool quote may be near the middle of the $1,700-$2,600 range, and local pickup can avoid freight. In rural areas or regions with limited dealer inventory, special ordering and shipping can add $50-$150 and extend the wait.
Labor costs also differ across the country. A demolition worker may bill about $50-$75 per hour in lower-cost markets and $75-$125 per hour in high-cost metro areas. Those rates change the value of buying versus renting: avoiding one rental trip may matter less than reducing labor time on a costly crew. These are broad planning ranges, not fixed regional price lists.
Weather and construction demand can influence rental availability. Busy spring and summer periods may leave fewer demolition hammers available, especially around major renovation markets. A customer who needs a specific date should call more than one rental yard and confirm both the model and pickup time. A similar SDS-Max tool may be offered as a substitute, but its weight, impact energy, and operating condition may differ.
Sales tax varies by state and locality, and some sellers charge tax based on delivery destination. For example, a $2,100 purchase adds $126 at 6% tax or $210 at 10%. Compare final delivered totals, not pre-tax advertised prices, and ask whether quoted shipping, accessories, and service fees are included.
Which TE 700-AVR Costs Can Buyers Cut Safely
The safest savings usually come from matching the purchase to actual use, avoiding duplicate accessories, and comparing complete written quotes. For a single project, price a one-day rental and a weekly rate before purchasing. If buying used, test the tool and inspect the cord, handle, case, and tool holder; a lower price is worthwhile only if expected repair costs do not erase the savings.
Choose chisels for the actual task instead of buying a large accessory set by default. A pointed chisel handles breaking, while a flat chisel can help with scaling and edge work. If the job calls for multiple tools, ask whether a rental package includes them. Do not use a worn or incorrect accessory simply to avoid a modest replacement cost; it can reduce productivity and may create a safety concern.
Control the work scope before scheduling labor. Mark the concrete area, identify embedded services, and arrange a clear route for debris. Removing loose items and protecting nearby surfaces can reduce setup time, but electrical, plumbing, or structural work should be handled by qualified trades when needed. Ask contractors to separate demolition, hauling, and disposal charges so optional work is not hidden in a lump sum.
Get at least two or three itemized quotes and compare model, condition, accessories, warranty or return terms, delivery, and tax. Avoid paying for service coverage without checking what it excludes, and do not assume a lower online listing includes the same package. Assumptions: Savings depend on job duration, tool condition, local rental availability, and the buyer’s ability to transport the equipment.