PGT impact windows typically cost $900-$2,500 per installed window, with an average near $1,500 for a standard-size opening and a straightforward replacement. A whole-home project often runs $15,000-$40,000, depending on window count, opening size, glass and frame selections, labor, and local permitting.
Large custom openings, upper-story access, and required structural work can push a quote higher. The ranges below reflect typical U.S. coastal-market pricing, not a manufacturer price list; PGT product lines and local installation requirements vary.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed standard window | $900 | $1,500 | $2,500 | Per opening; basic replacement scope |
| Installed large or custom window | $2,000 | $3,500 | $6,000+ | Oversized, specialty shape, or difficult access |
| Whole-home project | $15,000 | $25,000 | $40,000+ | About 10-20 openings; scope varies |
| Installed cost per square foot | $50 | $85 | $150+ | Useful for comparing differently sized windows |
What PGT Impact Windows Cost by Opening Size
For an ordinary retrofit, a PGT impact window often lands between $900 and $2,500 installed. The low end usually represents a smaller, standard rectangular window, accessible from ground level, with limited trim repair. A typical 3-by-5-foot opening may cost about $1,200-$2,000 installed, while a larger picture window or complex opening can exceed $3,000.
For budgeting, use roughly $1,500 per standard opening before accounting for unusual sizes or repairs. A home with 12 standard windows could therefore see a preliminary range of $14,400-$30,000. That is not a final quote: a mix of sliders, fixed panes, and specialty shapes can change the average substantially.
New-construction installation can price differently from replacing windows in an existing home. A retrofit may include removal and disposal but require careful work around existing stucco or siding. A new opening, major framing change, or extensive exterior finish repair is additional work. Assumptions: standard residential openings, normal access, mid-grade PGT impact products, and licensed installation in a coastal U.S. market.
How Frame, Glass, and Installation Shape the Quote
A useful estimate separates the window unit from labor and job-related charges. Ask the contractor to list the product series, opening dimensions, glass configuration, removal, finish work, permit costs, and any warranty fees. A bundled total can be hard to compare if one quote includes repairs and another excludes them.
| Quote component | Typical range | What changes the amount | Pricing basis |
|---|---|---|---|
| PGT window unit | $500-$1,800 | Size, frame, configuration, glass | Per window |
| Removal and installation labor | $300-$800 | Access, opening condition, crew time | Per opening |
| Trim, sealant, and finish repair | $75-$500 | Interior and exterior damage | Per opening |
| Permit and inspection charges | $100-$600 | Municipality and project scope | Per project, sometimes per permit |
| Delivery and disposal | $25-$150 | Distance, window count, haul-away | Per project or opening |
Labor is often quoted per opening, but hourly pricing can help explain complex work. A two-person crew may take 2-4 hours to replace a standard window when the frame is sound; masonry, upper floors, or damaged framing may extend the job. Compare the installed scope, not just the listed window-unit price.
Which PGT Glass and Coastal Ratings Raise the Price
Impact glass is engineered to meet applicable windborne-debris and building-code requirements, but specifications differ by product and location. A larger pane, wider unit, or special shape requires more material and may need a stronger frame or additional reinforcement. As a broad comparison, a standard single opening may be $900-$2,500 installed, while a large custom configuration can reach $3,000-$6,000 or more.
Code requirements depend on the address, building type, exposure, and local approval rules. Coastal High-Velocity Hurricane Zones, including parts of South Florida, can require specific product approvals and installation details. A product rated for one size or configuration may not cover a different opening without an approved design. The installer should identify the applicable approval and confirm the proposed unit meets the local requirements.
Glass options can also alter the price. Tinted or laminated configurations, privacy glass, decorative patterns, and specialty coatings may add roughly $100-$500 or more per opening, depending on product and availability. A low-E coating may affect cost but can be relevant where heat gain is a concern. Confirm the exact glass and approved unit configuration in writing before comparing bids.
Measurements are another price threshold. When a window exceeds roughly 20-25 square feet, or has an unusual aspect ratio, a quote may require a larger product, engineering review, or special handling. The price jump is not uniform: ask the contractor to identify whether the premium comes from unit size, reinforcement, engineering, or installation complexity.
How Long Does a PGT Window Replacement Take?
A typical crew can often replace 5-10 standard windows in one day if openings are accessible and the frames are in good condition. A project of 10-15 windows commonly takes 1-3 workdays, including removal, setting, sealing, and basic trim work. Large picture windows or multi-panel sliders may need more crew members, lifting equipment, and additional time per opening.
Labor rates vary by market and job type. In many U.S. areas, window installers charge about $50-$100 per hour per worker, although fixed per-window pricing is more common. A two-person crew working 8 hours at $60-$90 per worker-hour represents $960-$1,440 of crew labor for the day, before overhead and materials. That calculation is a comparison tool, not a substitute for a contractor’s installed bid.
Scheduling can also affect the timeline. Measurements, product ordering, permit approval, and inspections may add several weeks before installation, especially during storm season or when custom units are involved. Plan for the installation window separately from the product lead time. Ask whether the contractor protects exposed openings if an unexpected delay occurs.
How South Florida and Gulf Coast Quotes Compare
Labor, permit practices, demand, and code requirements make coastal prices differ from inland prices. As a general estimate, South Florida and other high-demand coastal metros may run 10%-25% above a lower-cost inland market for a comparable scope. Gulf Coast cities can vary widely; local wind-load requirements and contractor availability matter more than a simple state-wide average.
In higher-cost markets, a standard opening may trend toward $1,400-$2,500 installed, while some inland or less congested markets may see $900-$2,000 for a similar replacement. These are broad planning ranges rather than fixed regional tariffs. Remote locations can carry additional delivery fees, and urban sites may involve parking, access, or work-hour limits.
Check whether a bid includes engineering, permit handling, disposal, and exterior restoration. Two quotes for the same number of windows can differ by thousands if one includes stucco repair or a more demanding installation method. Compare bids using the same window schedule, specifications, and included work. Local approval costs should be verified with the building department or the contractor before signing.
When Does Repair Cost Less Than Replacing a PGT Window?
Repair may be economical when the frame and glass remain intact and the problem is limited to a lock, roller, handle, seal, or track. Common hardware service can cost about $100-$400 per opening, while more involved sash or track work may run $250-$800. Availability of the exact component and the age of the window affect the final price.
Replacement is more likely to make financial sense if impact glass is cracked, the frame is bent or corroded, water has damaged the surrounding structure, or a failed unit cannot be repaired with available parts. Replacing one standard window at $900-$2,500 can cost more than a small service call, but it may avoid repeated repairs or solve a code-compliance issue during a larger renovation.
Request a written diagnosis that separates parts, labor, and any service-call charge. A technician may charge $75-$150 to inspect or troubleshoot, sometimes credited toward approved repairs. Repair is usually the lower upfront expense only when the underlying frame and impact-glass assembly remain serviceable. Avoid treating a cosmetic fix as a substitute for replacing damaged safety glass.
Which Upgrades Can Be Left Out of a PGT Quote?
Keep required impact protection and locally approved specifications, but question optional upgrades that do not address the home’s needs. Decorative grids, specialty colors, obscure glass, and premium finishes may add $100-$500 or more per window. Coordinating every opening with the same upgrade can create a sizable premium, even where the feature is mainly aesthetic.
Ask whether existing interior trim can remain, whether sound exterior trim is reusable, and whether a repair is possible for isolated frame damage. Avoid authorizing full-wall finish restoration when only a small area needs patching, but do not cut necessary flashing, sealing, or code-required fastening. A low bid that omits weatherproofing can lead to water intrusion and costly repairs.
Scheduling the work outside peak storm-repair demand may improve contractor availability, although product prices and lead times are not guaranteed to fall. Bundling several openings can reduce setup and delivery charges per window; adding unrelated work may instead complicate scheduling. Control the scope by approving necessary performance specifications first and optional appearance upgrades second.
Get at least three itemized quotes with the same opening measurements and PGT product specifications. Check whether each contractor includes disposal, permit coordination, inspection, interior protection, and cleanup. Verify warranty coverage for both the window and installation, and ask which repairs would be billed as change orders if hidden damage appears after removal.