EasyTurf artificial grass typically costs about $8-$18 per square foot installed, with many standard residential projects averaging $12-$14 per square foot. The final price depends on turf model, yard size, excavation, base preparation, access, removal, and local labor rates; premium systems or difficult sites can exceed $20 per square foot.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed EasyTurf | $8/sq ft | $12-$14/sq ft | $20+/sq ft | Residential supply and installation; complex sites may cost more |
| 300-sq-ft area | $2,400 | $3,600-$4,200 | $6,000+ | Small lawn, with possible minimum-job charge |
| 500-sq-ft area | $4,000 | $6,000-$7,000 | $10,000+ | Typical compact yard or lawn replacement |
| 1,000-sq-ft area | $8,000 | $12,000-$14,000 | $20,000+ | Broad lawn; assumes ordinary access and preparation |
Assumptions: U.S. residential pricing, standard access, typical turf selection, and professional installation. Estimates are planning ranges, not an official EasyTurf quote.
What homeowners pay for an installed EasyTurf lawn
For a professionally installed lawn, a useful starting budget is $8-$18 per square foot, including turf and common installation work. At the midpoint, a 500-square-foot area costs roughly $6,000-$7,000. Prices below the range may reflect basic turf, a large uncomplicated site, or limited preparation; higher quotes can include premium products, substantial excavation, drainage work, or disposal.
Most standard residential installations land near $12-$14 per square foot before unusual site work. A small project can have a higher effective rate because mobilization, delivery, and crew setup are spread over fewer square feet. A large, open yard may receive a lower per-square-foot price, though its total bill is much larger.
Product-only pricing is commonly about $2-$6 per square foot for synthetic turf, depending on model, pile height, density, color, and backing. Turf sold without installation does not include the aggregate base, infill, seam materials, labor, or site preparation. Retail and contractor prices may also differ, so a material quote should not be compared directly with a complete installed estimate.
Use the quoted measurement carefully. Irregular edges, curves, seams, and cuts around trees or planters can increase the amount ordered beyond the lawn’s measured surface. Ask whether the estimate prices the finished area or the total turf material required, and whether tax and delivery are included.
What turf, base, and labor add to the quote
Installation bids vary in how they group work. The breakdown below shows common planning ranges; a contractor may combine several items into one per-square-foot price. Base preparation and labor are major reasons two bids for the same turf model can differ.
| Quote component | Typical price | What it usually covers | Common price driver |
|---|---|---|---|
| EasyTurf material | $2-$6/sq ft | Turf rolls and selected product model | Model, density, backing, and order size |
| Excavation and base | $2-$5/sq ft | Removing soil, grading, and compacted aggregate | Existing lawn, soil condition, and base depth |
| Installation labor | $2-$5/sq ft | Cutting, seaming, securing, brushing, and infill work | Access, shape, crew productivity, and detail work |
| Infill and accessories | $0.50-$2/sq ft | Infill, nails or staples, seam tape, and edge supplies | Product specification and use requirements |
| Removal and disposal | $0.50-$3/sq ft | Hauling away existing grass, soil, or old turf | Material volume, disposal fees, and haul distance |
| Drainage or edging | $1-$5/sq ft where needed | Drainage improvements, borders, or restraints | Site slope, water flow, and selected edging |
Costs shown for separate work can overlap with a contractor’s bundled rate; they should not automatically be added to the full installed price. For example, a bid that already includes excavation and disposal should not charge those items again as separate extras. Request a written scope that states the included base material, approximate depth, infill type, seam work, and cleanup.
Labor can be estimated as hours multiplied by the crew’s hourly rate, but installers often quote by project or square foot. Where time-and-material pricing applies, a broad planning rate is $50-$100 per worker-hour, with regional and contractor differences.
How yard size, turf model, and base depth change price
Size affects both total and unit price. A 200- to 300-square-foot patch may be billed at a minimum charge or at a higher effective rate, while a 1,000-square-foot open lawn can be more efficient to install. As a rough installed comparison, 300 square feet may total $2,400-$6,000, 500 square feet about $4,000-$10,000, and 1,000 square feet about $8,000-$20,000, depending on scope.
Turf model matters because product specifications and intended uses differ. A basic landscape lawn may fall toward the lower material range, while a denser or more specialized model can cost more. Ask for the exact model name and specification in the bid rather than relying on a generic description such as “premium artificial grass.” If the material price is not itemized, ask the installer to identify the product and warranty terms.
Base requirements can shift the quote substantially. A typical prepared base may use roughly 2-4 inches of compacted aggregate, but actual depth depends on soil, drainage, and site design. If the installer must remove an additional 2-3 inches of difficult soil, bring in more aggregate, or correct a low spot, the project may add $1-$5 per square foot in affected areas.
Shape and access also count. A rectangular lawn with clear equipment access is faster than a narrow side yard, a sloped area, or a space divided by planting beds. Curves and numerous obstacles require more cutting and seams. Ask the contractor to identify the measured square footage, proposed base depth, and any allowance for cuts or waste.
How many crew hours an EasyTurf installation takes
A straightforward 500-square-foot lawn may take a small crew about 1-2 working days after materials are on site. A 1,000-square-foot open area may take roughly 2-3 days. These ranges assume ordinary soil, manageable access, and no major drainage correction; excavation, removal, complicated seams, or weather delays can extend the schedule.
Labor time is not just rolling out turf. Crews typically remove or prepare the surface, grade it, spread and compact base material, fit and join the turf, secure the perimeter, add infill, and brush the fibers. Ask whether the quote includes all of these tasks and whether the crew size and schedule are firm or estimates.
Contractors may charge a minimum for small jobs instead of using a strict per-square-foot rate. A small courtyard, walkway strip, or dog run can therefore have a higher rate than a larger lawn. Compare total project prices and the included work rather than judging a bid solely by its unit rate.
On labor-based estimates, confirm the hourly rate, crew size, and how delays or added work are approved. A written change-order process can prevent a low initial quote from growing through unapproved extras.
EasyTurf compared with sod and other artificial grass
Natural sod often costs less to install initially, commonly around $1-$3 per square foot for basic supply and installation, though grading, irrigation changes, and soil improvement can increase the total. Sod also needs watering and ongoing mowing, and replacement may be necessary if it fails to establish. The initial price is not an equal comparison unless site preparation and irrigation are included on both sides.
Other artificial grass products may have similar installed totals, often about $7-$20 per square foot depending on product and site work. A lower material price does not necessarily mean a lower finished price if the installation requires the same excavation, base, and labor. Compare product specifications, backing, drainage provisions, warranty coverage, and installation scope.
For a small worn patch, reseeding or replacing sod can cost less than converting the whole lawn, provided the underlying soil and irrigation are workable. Repairing an existing artificial lawn may also be less expensive when damage is limited to a seam or a small area, although matching an older turf model can be difficult. Compare full installed scope and expected upkeep, not just the turf roll price.
How region and access shift EasyTurf estimates
Labor, disposal, and delivery rates vary across the country. As a planning adjustment, metropolitan areas with higher labor and operating costs can run about 10%-25% above a national middle estimate. Smaller markets may be about 5%-15% below it when contractor competition and access to materials are favorable. These are broad comparisons, not guaranteed local discounts.
In hot or dry regions, homeowners may be more likely to consider artificial turf, but demand does not make installation automatically cheaper. Local crews may have more experience and availability, while peak demand can push scheduling or labor prices upward. In colder areas, seasonal scheduling can be constrained by frozen ground or wet conditions, which may limit when excavation and base preparation are practical.
Access has a direct effect regardless of region. If a crew can reach the yard with a compact loader, removal and base work may be faster. A narrow gate, stairs, long carry distance, or limited staging space can add labor and equipment handling. Ask the estimator to inspect access rather than relying only on photographs.
Assumptions: Regional percentages compare similar turf, area, and work scope. Local quotes can fall outside these ranges because of contractor availability, disposal charges, soil, and travel distance.
Which removal and drainage extras raise the bill
Removing an existing lawn or failed artificial turf may add about $0.50-$3 per square foot, especially when disposal, heavy soil, or difficult hauling is involved. Some bids include removal in the base rate, while others price it separately. Confirm whether the charge includes loading, transport, and disposal fees.
Drainage work is another potential extra. A small correction or added drain may cost several hundred dollars, while broader drainage changes can add $1,000-$5,000 or more depending on trench length, outlets, and site grading. A turf surface does not fix a drainage problem by itself; water must still move through the base and away from the property.
Edging, steps, tree wells, and transitions to concrete can add cutting and finishing time. A simple perimeter restraint may be included, but decorative borders or extensive edge work can be quoted separately. Ask for a line item for each nonstandard feature and whether the price applies to the whole yard or only the affected area.
Get any drainage, removal, or edging allowance stated in dollars before work begins. If the contractor cannot determine the full scope until excavation, ask for unit rates and a requirement for approval before exceeding the allowance.
How to lower the EasyTurf price without cutting corners
Keep the project boundary clear and avoid adding small side areas or decorative zones unless they serve a purpose. Combining areas may reduce repeated mobilization, but an irregular layout with many cuts can offset the savings. Have each bidder measure the same footprint so price comparisons use the same square footage and work limits.
Choose the turf model based on the intended use rather than paying for specifications that are not needed. Ask for prices on two or three specific models with the same installation scope. Confirm whether a lower-priced option changes the warranty, drainage design, or infill requirement before treating the difference as a saving.
Preparing the site may help only when the contractor agrees that the work is appropriate. Clearing movable items or trimming vegetation can reduce crew time, but homeowners should not excavate or alter grading without written direction. Poorly prepared soil can lead to rework, uneven surfaces, or drainage issues that cost more than the labor saved.
Compare at least three itemized quotes and check what each includes: turf model, measured area, excavation depth, base material, compaction, infill, seams, removal, cleanup, and warranty. Schedule when contractors have availability rather than paying for rush work, and avoid upgrades that do not address a documented need. The fairest low bid is the one with the same product and complete scope, not simply the smallest total.
What an EasyTurf warranty and upkeep mean for budget
Warranty terms depend on the specific turf product and seller; they should be checked in the written quote rather than assumed from the brand name. Confirm the coverage period, exclusions, claim process, and whether labor is covered. Damage from misuse, poor drainage, improper cleaning, or installation outside requirements may be treated differently from a product defect.
Artificial turf reduces routine mowing and watering, but it is not maintenance-free. Occasional rinsing, brushing, debris removal, and pet-waste cleanup may be needed. A homeowner can generally handle basic upkeep; professional cleaning or infill top-ups, when needed, may cost roughly $100-$400 for a modest area, depending on service and location.
When comparing long-term expense with natural grass, include local water prices, mowing costs, fertilizer, repairs, and the cost of replacing turf if it wears out. A five-year comparison should use the actual lawn size and local service rates, rather than assuming every yard saves the same amount. Request product-specific warranty details and include realistic upkeep in the ownership budget.