An IKEA kitchen in the USA typically costs $10,000-$30,000 installed, with a national planning average near $18,000 for a standard-size room. Cabinet count, door style, countertop material, installation labor, and whether the project includes appliances or demolition create the largest price differences.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinets and fronts | $2,000 | $5,500 | $12,000 | Cabinet boxes, doors, drawers, and interior fittings |
| Countertops | $800 | $2,500 | $6,000 | Laminate at the low end; stone at the high end |
| Professional installation | $2,000 | $5,000 | $10,000 | Depends on layout, local labor, and installation scope |
| Complete installed kitchen | $8,000 | $18,000 | $35,000+ | Excludes major structural work; appliances and demolition vary |
What an IKEA kitchen costs for a typical 10-by-10 room
A modest 10-by-10-foot IKEA kitchen with standard SEKTION cabinets, basic laminate counters, and limited accessories can land near $8,000-$14,000 installed. A more typical midrange project with upgraded fronts, more drawers, a sink, a faucet, and professional labor runs about $14,000-$24,000. Larger rooms, stone counters, premium appliances, or extensive site work can push totals above $35,000.
Cabinet-only budgets commonly fall between $2,000 and $12,000, or roughly $150-$400 per linear foot for cabinets and fronts, depending on layout and selections. This per-foot estimate does not include countertops, installation, appliances, or plumbing. IKEA cabinet systems are modular, so two kitchens with the same floor area can have very different cabinet counts and prices.
For a straightforward, professionally installed kitchen, $14,000-$24,000 is a practical planning range before major repairs or structural changes.
Assumptions: 10-by-10-foot kitchen, standard ceiling height, ordinary access, U.S. midmarket labor rates, and no wall relocation.
How SEKTION cabinets and installation shape the quote
The quote usually combines cabinet frames, doors and drawer fronts, interior fittings, countertop, labor, and delivery. Cabinets are only one portion of a finished kitchen bill. A low cabinet estimate may exclude panels, cover panels, toe kicks, fillers, handles, lighting, sink, faucet, or installation, so the itemized quote matters more than a headline package price.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Cabinet frames, fronts, drawers | $2,000 | $5,500 | $12,000 | About 10-25 cabinet units, configuration dependent |
| Hardware and interior fittings | $200 | $800 | $2,000 | Pulls, organizers, soft-close features, and inserts |
| Countertop material and fitting | $800 | $2,500 | $6,000 | Approximately 30-50 sq ft of counter |
| Installation labor | $2,000 | $5,000 | $10,000 | Cabinet assembly, leveling, fastening, and trim |
| Delivery and disposal | $100 | $600 | $1,800 | Delivery distance and old-kitchen removal affect charges |
These ranges represent common U.S. project estimates, not a fixed IKEA national package price. Taxes, local delivery charges, contractor overhead, and upgrades may be separate. A countertop quote should state whether it includes measuring, cutouts, edge treatment, installation, and removal of the old surface.
Compare quotes by matching included items, especially panels, hardware, countertop fabrication, and disposal.
Assumptions: Standard kitchen-sized order, ordinary delivery access, and no custom carpentry.
Which cabinet sizes, fronts, and layouts move the price
Cabinet quantity and type are the first major drivers. A compact one-wall kitchen with 8-12 cabinet units may require $2,000-$5,000 in cabinets and fronts. An L-shaped kitchen with 15-22 units often needs $4,000-$9,000, while a larger U-shaped layout or island can exceed $10,000 before counters and installation.
Drawer-heavy designs often cost more than basic shelves because drawer hardware and fitted interiors add expense. Tall pantry cabinets, integrated waste sorting, pull-out storage, and finished end panels also add to the order. A 36-inch-wide drawer base, for example, typically costs more than a simple 24-inch door base in a comparable finish, while a tall pantry unit can cost several hundred dollars or more depending on configuration.
Door style and finish create another substantial spread. Basic fronts help keep cabinet budgets near the low end; higher-priced finishes, glass doors, decorative panels, and extensive exposed ends can add hundreds to several thousand dollars. A kitchen with an island also needs additional cabinet frames, panels, countertop area, and potentially electrical work.
Cabinet count, drawer density, and finished panels usually matter more than room floor area alone.
Assumptions: SEKTION modular cabinets, common U.S. sizes, and no custom-built cabinetry.
What installation labor adds in U.S. markets
Professional installation commonly adds $2,000-$10,000, with many standard jobs falling around $3,500-$6,500. Rates vary by city, installer experience, project complexity, and whether the crew assembles cabinets, installs counters, reconnects appliances, or coordinates trades. In higher-cost metropolitan areas, labor can run 15%-30% above a similar suburban or smaller-market quote; rural travel and limited contractor availability can also raise charges.
Assembly and installation are not always the same service. Some quotes cover assembly, leveling, anchoring, and trim but exclude plumbing, electrical work, countertop installation, and appliance hookup. Confirm who is responsible for each task, whether wall repairs are included, and whether the installer will handle fillers and cabinet adjustments around uneven floors.
A basic cabinet installation might take a two-person crew 2-4 days after delivery, while a kitchen requiring demolition, corrections, and multiple trades can take one to three weeks of work spread across a longer calendar schedule. Labor estimates can be compared using the formula shown below, but fixed project bids are also common.
Ask for labor hours or a defined scope so a low bid does not conceal excluded work.
Assumptions: Standard access and a ready-to-install room; regional rates and trade scope vary.
How removal, counters, appliances, and plumbing change total
Removing old cabinets and countertops can add $500-$2,000, depending on material, disposal fees, and access. Demolition of tile, damaged drywall, or heavy stone may cost more. If a contractor must repair walls or floors after removal, allow another $300-$2,000 for ordinary patching and preparation; extensive damage is quoted separately.
Countertops span a wide range. Laminate commonly costs about $20-$50 per sq ft installed, while quartz often runs $50-$120 per sq ft installed. Natural stone can fall around $60-$150 per sq ft, depending on slab, edge, cutouts, and local fabrication. A 35-sq-ft counter can therefore cost roughly $700-$1,750 in laminate or $1,750-$4,200 in quartz, before unusual features.
Appliances add approximately $1,500-$6,000 for a basic coordinated set, with premium or built-in models costing substantially more. Sink and faucet purchases may add $250-$1,200, excluding plumbing labor. Keeping plumbing and gas lines in their current locations can avoid several hundred to several thousand dollars in trade work; moving a sink or range may require new lines, permits, and wall or floor access.
Demolition, countertop fabrication, and utility relocation are frequent budget additions beyond the cabinet order.
Assumptions: Typical residential quantities and installed midmarket materials; appliance and trade selections are major variables.
Three realistic IKEA kitchen budgets by project scope
The following examples show how room size and included work affect the total. They are planning estimates rather than IKEA package quotes; local labor and product choices can move each figure by thousands of dollars.
| Project | Specifications | Estimated total | Typical breakdown |
|---|---|---|---|
| Small refresh | 8-10 cabinet units, laminate counter, reuse appliances | $8,000-$13,000 | $3,000-$4,500 cabinets; $1,000-$1,800 counter; $2,000-$3,500 labor; balance for fittings and delivery |
| Midrange L-shape | 15-20 units, upgraded fronts, quartz counter, new sink | $17,000-$27,000 | $5,000-$8,000 cabinets; $2,500-$4,500 counter; $4,000-$7,000 labor; balance for fixtures and removal |
| Large kitchen with island | 22-30 units, premium fronts, stone counter, appliance set | $30,000-$50,000+ | $9,000-$15,000 cabinets; $4,000-$8,000 counter; $6,000-$10,000 labor; appliances and site work account for remainder |
For the midrange example, a 40-sq-ft quartz counter at $65-$110 per sq ft installed accounts for about $2,600-$4,400. If cabinet installation takes 45-70 labor hours at an effective $60-$100 per hour, the labor component alone would imply $2,700-$7,000; the final bid may also include assembly, travel, trim, and project overhead.
Use the line-item totals to compare project scope, not just the final number.
Assumptions: Typical U.S. materials and midmarket labor; examples exclude major structural work.
How IKEA compares with stock and custom cabinets
IKEA pricing often falls between entry-level stock cabinets and fully custom cabinetry once installation and finished details are included. Stock cabinets for a comparable kitchen may cost about $3,000-$10,000 for cabinets, while semi-custom options can reach $8,000-$20,000 or more. Custom cabinets may run $15,000-$40,000+ for the cabinet package, depending on wood, finish, design, and craftsmanship.
These comparisons are not perfectly like-for-like. IKEA uses modular sizes and standardized components, while custom shops can build around unusual dimensions, ceiling heights, and specialty storage. A lower-priced IKEA cabinet order can lose its advantage if the project requires extensive fillers, modification, paid assembly, or a premium countertop. Conversely, retaining the layout and choosing simple fronts can keep the overall price competitive.
Replacing only damaged doors, drawers, or hardware may be cheaper than a full kitchen replacement when cabinet frames remain sound and compatible. However, a partial refresh can become less practical if the existing boxes are damaged, the layout is inefficient, or matching parts are unavailable.
Compare the installed cabinet package and included finish work, rather than cabinet-box prices alone.
Assumptions: Similar kitchen size and quality level; custom fit and installation scope differ by supplier.
Where to trim an IKEA kitchen budget without losing function
Keeping the existing sink, range, and refrigerator locations is one of the clearest ways to control trade costs. Retaining a usable floor and avoiding wall changes can save substantially more than small product substitutions. Before ordering, finalize the cabinet plan and appliance dimensions to reduce costly changes, duplicate delivery, or unusable filler pieces.
Use standard cabinet widths where possible and reserve specialized pull-outs for locations where they solve a real storage problem. Choose a simpler door finish, limit glass fronts and decorative panels, and compare drawer banks against door cabinets with shelves. These choices can reduce the cabinet bill while preserving the same basic storage capacity.
Countertop selection can produce an immediate difference: laminate or a modest solid-surface option may reduce the total by $1,000-$3,000 compared with higher-priced stone, depending on area and fabrication. Reusing appliances, faucet, or sink is worthwhile only when they fit the new plan and remain in good condition. A reuse decision that requires adapters, repairs, or awkward layout changes may not save money overall.
Request at least three itemized installation quotes based on the same cabinet plan, counter area, demolition scope, and finish details. Check whether each bid includes assembly, leveling, trim, haul-away, plumbing, taxes, and warranty. Schedule delivery only when the site is ready, and keep a contingency of about 10%-15% for hidden damage, uneven floors, or small code-related changes.
Stable layout, standard cabinet sizes, and comparable itemized bids offer the most dependable savings.
Assumptions: Existing kitchen layout is serviceable, and no concealed water damage or code correction is required.