Ivory Fantasy granite typically costs $55-$110 per square foot for the stone and about $80-$160 per square foot installed, depending on the slab, layout, and local labor. A 40-square-foot kitchen countertop commonly totals $3,200-$6,400 before unusual demolition, plumbing changes, or premium edge work.
The name can refer to stone sold as granite or quartzite, and appearance and hardness vary by quarry and supplier. Confirm the actual stone type, slab thickness, and finished quote before comparing prices.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stone material | $55/sq ft | $80/sq ft | $110/sq ft | Slab price varies with grade and availability |
| Installed countertop | $80/sq ft | $120/sq ft | $160/sq ft | Typical fabrication and installation included |
| 40-sq-ft kitchen | $3,200 | $4,800 | $6,400 | Standard layout, excluding major extra work |
| Slab selection | $1,500 | $2,500 | $4,000+ | Approximate cost per slab; dimensions and grade vary |
What Ivory Fantasy granite costs for a kitchen countertop
For a standard kitchen countertop, installed Ivory Fantasy often falls between $80 and $160 per square foot. At 40 square feet, that works out to approximately $3,200-$6,400. A straightforward job with readily available material and simple edges may land near the low end; a heavily veined slab, complex island, or high-cost metro area can push the quote higher.
Stone-only pricing is commonly $55-$110 per square foot. That figure may reflect slab area rather than the finished countertop area, and suppliers can price by slab or by square foot. Since cutting creates offcuts that may not suit another project, a small counter can still require purchase of a full slab or an agreed remnant.
For a useful comparison, ask whether each quote includes templating, fabrication, delivery, sink cutouts, installation, and sales tax. A low stone price does not necessarily mean a low finished price.
Assumptions: U.S. pricing for a 30- to 45-square-foot kitchen, standard 3-cm stone, ordinary access, and a simple countertop layout.
How slab, fabrication, and installation charges build the quote
The final bill combines stone selection with shop work and on-site labor. The following ranges are common planning estimates, not fixed national rates. Some fabricators bundle these charges into an installed price, so the quote should state what is included and whether the stone allowance is based on a specific slab.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Ivory Fantasy stone | $55-$110 | Per sq ft of material | Grade, slab size, pattern, and local stock |
| Fabrication | $15-$35 | Per sq ft of finished top | Cutouts, seams, edge profile, and layout |
| Installation labor | $10-$25 | Per sq ft | Stairs, access, weight, and crew requirements |
| Sink and cooktop cutouts | $150-$400 | Per opening | Number of openings and cutout detail |
| Removal and disposal | $5-$15 | Per sq ft of old top | Existing material, transport, and disposal fees |
| Delivery and handling | $150-$500 | Per job | Distance, slab handling, and site access |
Fabricators may charge separately for a full-height backsplash, waterfall panel, upgraded edge, or additional seams. A basic eased edge is often included, while decorative profiles may add $10-$30 per linear foot. A backsplash made from matching stone is often priced by square foot and can be expensive because it uses more slab material.
Separate line items reveal whether a quote is genuinely cheaper or simply leaves out needed work.
Labor estimate formula:
How slab thickness, finish, and veining change the price
Slab selection is a major cost driver because Ivory Fantasy is not a standardized manufactured product. Natural variation can affect the background color, veining, movement, and usable yield. A visually consistent slab or a bold pattern that must align across an island may cost more than a less selective purchase. Prices also depend on whether a local yard has suitable stock or must arrange special ordering.
Standard 3-cm stone is commonly used for kitchen counters. A 2-cm slab may cost less as material but can require a built-up edge or additional support, reducing or eliminating the savings. The fabricator can confirm whether the selected slab is suitable for the span and cabinet arrangement.
Polished surfaces are widely available; honed or other specialty finishes can add roughly $5-$15 per square foot when offered. Finish pricing depends on the supplier and how much extra processing is needed. Request the exact slab number and inspect it in person when possible, since a small sample will not show the full pattern.
Ask the fabricator to price the actual slab and mark the proposed cut plan before approving fabrication. This helps identify waste, seam placement, and whether the pattern will work around sinks and corners.
Pricing assumes commonly stocked slabs; special-order material or a required pattern match can exceed the ranges shown.
Why a 40-square-foot layout can cost more than a simple counter
Square footage is not the only measure of fabrication effort. A compact kitchen with several corners, a separate island, and multiple cutouts can take more shop time than a larger straight run. Each seam, edge, sink opening, and change in direction adds planning or finishing work.
For example, an island with a waterfall leg uses stone on the vertical side as well as the horizontal top. That can require extra slab area and careful vein alignment. A large overhang may also need structural support, which should be specified by the installer rather than assumed to be included.
Cutout count affects the quote directly. One standard undermount sink opening may cost $150-$400, while additional faucet, soap-dispenser, or cooktop openings can add charges. A sink that requires a finished edge around the opening may cost more than a basic cutout.
Measure finished counter area and list every edge, opening, and vertical surface when requesting estimates. A sketch or cabinet plan gives fabricators a better basis for comparison.
Example threshold: layouts with more than two sink or cooktop openings, or with over 10 linear feet of waterfall panels, often need additional fabrication beyond a basic per-square-foot allowance.
Regional stone pricing from large metros to rural markets
Installed prices vary by labor market and access to stone distributors. Large metropolitan areas may run about 10%-25% above a national midrange estimate because of higher shop wages, delivery expenses, and operating costs. Areas with several fabricators and slab yards may offer more competitive bids, although premium inventory can still be costly.
Rural projects may face a different cost pattern. Labor rates can be lower, but fewer nearby fabricators can mean longer delivery distances, travel charges, or limited choice of slabs. A remote location can add $150-$500 for delivery and handling, especially when a specialized truck or extra crew is needed.
These differences are not automatic: a city supplier with existing inventory could beat a rural special-order quote. Compare at least three estimates based on the same slab, measurement, edge, cutouts, and removal scope. Confirm whether the price includes tax and any site visit or template fee.
Compare complete installed totals, not regional averages or stone-only prices.
Regional ranges are planning adjustments; actual bids depend on the metropolitan area, supplier stock, travel distance, and job access.
How long templating and installation take, and what labor covers
After cabinets are ready, templating commonly takes one to two hours on site. Fabrication may take about one to three weeks after slab approval, depending on the shop queue and material availability. Installation of a typical kitchen often takes four to eight hours, with larger or more complex layouts requiring additional crew time.
Labor includes transporting heavy stone, positioning sections, leveling, joining seams, and securing the countertop. A standard crew may have two or three installers. Narrow stairways, long carries, upper-floor delivery, or restricted parking can add labor or handling charges even when the counter area is modest.
Existing countertops may need removal before templating or installation. Removal and disposal commonly add $5-$15 per square foot, with higher charges possible for heavy stone, tile, or difficult access. Plumbing disconnection and reconnection may be excluded and billed by a plumber.
Confirm the sequence of removal, templating, cabinet readiness, and plumbing work before scheduling. Delays from unfinished cabinets can lead to rescheduling or extra trips.
Labor charges vary by crew rate, travel, site conditions, and whether removal or plumbing is included.
Three realistic Ivory Fantasy countertop quote examples
A small, uncomplicated project may be less costly than a full kitchen even if a slab minimum applies. The examples below show how scope affects the total; they are estimates rather than guaranteed supplier quotes.
| Project | Stone and area | Added work | Estimated total |
|---|---|---|---|
| Bathroom vanity | 10 sq ft at $75-$100 | One sink cutout, delivery, install | $1,100-$2,100 |
| Simple kitchen | 40 sq ft at $80-$120 installed | One sink cutout, standard edge | $3,700-$5,500 |
| Kitchen with island | 55 sq ft at $100-$145 installed | Two cutouts, premium edge, removal | $6,000-$9,000 |
The vanity example assumes a fabricator can use a remnant; buying a full slab could raise its price. The simple kitchen assumes normal access and no major backsplash. The island example includes a more involved layout, but a waterfall side or extensive vein matching could add another $800-$2,500 or more.
Ask whether small jobs qualify for remnant pricing and whether the quoted area includes backsplash or island panels. Those details can materially change the effective price per square foot.
Ivory Fantasy granite compared with quartz and other stones
Ivory Fantasy can be a quartzite, granite, or trade-named natural stone depending on the supplier. It should not be treated as identical to engineered quartz: engineered quartz has a manufactured pattern and typically offers more predictable color, while natural slabs vary piece by piece. Comparable installed engineered quartz often falls around $70-$150 per square foot, though premium designs can cost more.
Other natural stones may provide a lower initial price. Common granite options often run $50-$120 per square foot installed, while many quartzites fall around $80-$180 per square foot installed. These broad ranges overlap substantially, and a particular slab’s rarity or fabrication needs can matter more than its category.
Maintenance expectations should be confirmed for the specific slab. Some natural stones benefit from sealing, while the correct care depends on porosity and finish. Ask the supplier for written care recommendations and whether sealing is included. Avoid assuming that a trade name alone guarantees stain resistance or a particular durability rating.
Compare the exact slab, care instructions, and installed scope rather than choosing on material label alone.
Alternative material ranges are typical U.S. estimates for standard projects and may shift by grade, location, and layout.
Where homeowners can trim the installed price safely
Keeping the layout simple is often more effective than choosing a lower-grade slab. Straight runs, fewer seams, standard eased edges, and fewer cutouts reduce fabrication time. Limiting full-height backsplash or waterfall panels also reduces material use, particularly when the design does not require continuous veining.
Ask about remnant inventory for a bathroom, laundry counter, or small island. For a full kitchen, request prices on two or three slabs in different grades and compare the finished yield rather than the advertised stone rate. A lower-priced slab that creates more waste may not lower the total.
Get written bids from at least three fabricators using the same measurements and scope. Ask each to list removal, delivery, templating, cutouts, edge work, installation, tax, and exclusions. Scheduling outside a shop’s peak period may improve availability, but seasonal discounts are not guaranteed.
Control the design and compare itemized installed quotes before compromising on a suitable slab. Do not skip required cabinet support or use an installer who cannot explain the stone’s care and fabrication requirements.
Potential savings depend on local inventory and the original design; structural support, safe handling, and proper installation should remain part of the budget.