JELD-WEN doors typically cost $100-$1,500 for the door alone, while installed prices commonly range from $250 to $2,500 or more. The final quote depends on door type, size, material, glass, prehung or slab configuration, hardware, and the work needed to fit the opening.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Interior door, door only | $100 | $250 | $600 | Slab or prehung; material and style affect price |
| Exterior entry door, door only | $300 | $800 | $1,800 | Fiberglass, steel, or wood; glazing can raise cost |
| Installed interior door | $250 | $600 | $1,200 | Assumes standard opening and basic trim work |
| Installed exterior door | $700 | $1,500 | $3,000+ | Removal, weatherproofing, and finish work included as needed |
| Patio or sliding door | $800 | $1,800 | $4,000+ | Installed price depends on size, glass, and opening condition |
Typical JELD-WEN door prices by type and configuration
For a standard residential project, a JELD-WEN door and installation usually total $250-$2,500, with specialty patio units exceeding that range. These are planning ranges rather than fixed manufacturer prices. Retailers and contractors set the final price, and the same product line can have different options, stock levels, and local availability.
Interior slab doors often cost $100-$350 for common molded or hollow-core styles. Solid-core and more decorative interior models commonly run $200-$600. A slab is the door panel only; it reuses the existing frame, hinges, and often the lock preparation. Prehung interior doors, supplied in a frame with hinges, commonly cost $150-$650 before installation.
Exterior entry doors generally cost $300-$1,800 before labor. Basic steel models tend to fall toward the low end, while fiberglass and wood designs with decorative glass, upgraded finishes, or larger dimensions can cost substantially more. A complete prehung exterior unit can cost more than a bare slab because it includes a frame and weatherstripping.
Sliding patio doors and larger multi-panel units have a wider range. A standard replacement slider may cost $700-$2,000 for the unit, while larger or upgraded configurations can reach $3,000 or more before installation. Assumptions: common residential sizes, standard finishes, and U.S. retail pricing before sales tax.
What a JELD-WEN door quote includes
The door itself is only one part of the installed price; labor, frame work, finish materials, and disposal can add several hundred dollars. The table shows typical contributions for a straightforward replacement. A difficult opening or structural repair can push labor and materials beyond these ranges.
| Quote item | Typical range | Unit or scope | When it applies |
|---|---|---|---|
| Door unit | $100-$1,800 | Per door | Interior, entry, or patio product |
| Installation labor | $150-$600 | Per standard opening | More for exterior or multi-panel units |
| Frame, trim, and flashing | $40-$350 | Per opening | Depends on prehung selection and condition |
| Hardware and accessories | $25-$400 | Per door | Lockset, handle, hinges, screen, or upgraded sill |
| Removal and disposal | $30-$200 | Per old unit | May be bundled into installation |
| Permits or code work | $0-$500+ | Per project | Local rules and egress or safety changes |
Labor rates vary with trade, market, and job complexity. A simple interior replacement may require 2-4 hours, while an exterior prehung replacement often takes 4-8 hours. Patio door replacement can take a crew 6-12 hours, especially when the opening needs adjustment or interior and exterior trim must be rebuilt.
Contractors may quote labor as a flat rate rather than an hourly charge. For estimating, common residential labor rates are about $50-$100 per hour per installer, with higher rates in expensive metro areas. Ask whether the quote includes caulking, insulation, shimming, threshold adjustment, paint, and haul-away.
How size, material, and glass change the final price
Door dimensions and construction can move a quote by hundreds of dollars, particularly for exterior and patio products. A standard interior opening around 30-36 inches wide is usually less expensive than an oversized, custom, or nonstandard opening. A custom-size unit may add roughly 20%-60% compared with a comparable stock model, depending on the line and retailer.
Material affects purchase price, weight, finish requirements, and sometimes installation time. Hollow-core interior doors are generally the least expensive. Solid-core doors cost more but provide greater mass and sound reduction. For entry doors, basic steel commonly costs less than many fiberglass or wood designs. Wood species, decorative panels, and factory finishes can add $200-$1,000 or more over a basic entry option.
Glass is another meaningful price variable. A small decorative lite may add $100-$400, while larger glass areas or multiple panes can add $300-$1,000 or more. For exterior doors, insulated or privacy glass and internal grille options affect the price. Tempered safety glazing may be required near certain doors or locations, depending on local code and the installation.
Configuration matters as much as material. A slab typically costs less upfront, but it only makes sense when the existing frame is square, sound, and compatible with the new door. A prehung unit costs more as a product, yet can be a better fit when the old frame is damaged or the opening is being changed. Assumptions: stock residential dimensions; nonstandard sizes, unusual finishes, and custom orders can exceed listed ranges.
Installation time and labor for interior, entry, and patio doors
Installation often adds $150-$600 per opening, but exterior and patio replacements need more time than a basic interior swap. A carpenter may replace an interior slab in 1-3 hours if hinge locations and latch preparation match. Installing a prehung interior door commonly takes 2-4 hours, including leveling, fastening, and trim adjustment.
An exterior prehung replacement often takes 4-8 hours for a two-person crew. The installer removes the old unit, checks the sill and framing, sets and seals the new frame, adjusts the threshold, and reinstalls or replaces trim. If rot, water damage, or out-of-square framing is found, repairs can add $100-$800 or more in labor and materials.
Patio doors are heavier and may require two or more installers. A straightforward sliding-door replacement may take 6-10 hours; widening an opening, repairing framing, or replacing extensive trim can extend the work to a full day or longer. Confirm the crew size and whether a second visit for finishing or painting is included.
Installation quotes can also include a minimum service charge of $100-$250, even when the actual work is brief. Scheduling several doors together may reduce the per-door labor charge if the openings are similar and accessible. Labor estimate: $50-$100 per installer-hour in many markets; complex work and metro rates may be higher.
Interior slabs versus prehung entry and patio units
Comparing the right configuration prevents paying for a frame that is not needed—or underestimating the work to replace one. A slab is usually the economical choice when the existing jamb is intact, the opening is standard, and the replacement matches the old door’s dimensions and hinge positions. The product may cost $100-$600, with labor often adding $100-$300.
A prehung interior door may be a better value when the jamb is warped, damaged, or being replaced during a remodel. Typical unit prices are $150-$650, and a complete installation commonly totals $350-$1,000. Painting and new casing may be additional. A contractor should verify swing direction, rough-opening dimensions, and wall thickness before ordering.
For an exterior entrance, compare the complete unit rather than only the slab price. A door slab might appear less expensive, but the old frame must be reusable and compatible with the replacement. A prehung steel or fiberglass entry unit can cost $300-$1,800, with installation bringing a typical project to $700-$3,000. Patio doors are a separate category because glass area, panel count, and opening width make their unit and labor costs higher.
Repair may be cheaper if a door sticks because of loose hinges, a minor strike-plate issue, or worn weatherstripping. Basic adjustments or weatherstripping may cost $75-$250. Replacement is more likely to be economical when the frame has rot, the slab is damaged, or an exterior unit no longer closes or seals reliably.
How location and delivery affect JELD-WEN door prices
Regional labor and freight can shift the installed total by roughly 10%-30% from one U.S. market to another. Large metro areas and places with higher contractor wages often run 10%-25% above a typical national planning estimate. Rural areas may have lower hourly rates but higher travel charges or fewer installers, particularly for large patio units.
Climate and local building practices also affect selection and installation. Homes in regions with extreme heat, cold, wind, or driving rain may require upgraded glazing, weather seals, or more careful flashing. Those choices can increase the product or installation cost by $100-$600, depending on the door. Coastal exposure, high wind requirements, and local energy rules may require specific ratings or documentation.
Large or special-order doors can incur delivery charges of $50-$250, with additional costs for remote delivery, difficult access, or a second delivery attempt. Some retailers include standard delivery in the product price, while others charge separately. Verify whether the unit is delivered to the home, placed at the entrance, or carried inside.
Taxes are usually not included in advertised prices. Depending on the state and local rate, a $1,000 product purchase could add roughly $0-$100 in sales tax. Quotes should identify product, delivery, installation, disposal, and tax separately so regional differences are easier to compare.
Three sample JELD-WEN door project estimates
Project totals depend on the opening and included finish work, so the following examples show how a plausible quote can be built. They use common residential products and midrange labor assumptions rather than a guaranteed price for a specific model.
| Project | Product and work | Labor estimate | Likely total |
|---|---|---|---|
| Interior bedroom door | $220 prehung molded door; $70 trim and supplies | 3 hours × $75 = $225 | $515-$650 |
| Exterior entry replacement | $850 fiberglass unit; $180 flashing and hardware | 6 hours × $85 = $510 | $1,540-$2,050 |
| Sliding patio replacement | $1,650 insulated slider; $250 delivery and materials | 9 hours × $90 = $810 | $2,800-$3,600 |
The interior example assumes a standard opening, no framing repair, and basic casing. The entry-door example assumes removal of the old prehung unit and ordinary weatherproofing, but excludes painting. The patio example assumes an existing opening that does not need structural changes. Rot, custom sizing, upgraded glass, or extensive interior finish work can add $200-$1,000 or more.
To compare bids, check that each quote names the door configuration, dimensions, material, glass, finish, hardware, delivery, disposal, and warranty terms. One estimate may include trim and painting while another covers installation only, making the lower headline price misleading.
Which add-ons can raise a door replacement quote
Old-frame repairs and finish work are frequent sources of costs beyond the door’s listed price. Removing and disposing of an existing unit typically adds $30-$200, depending on size and local hauling fees. Replacing damaged jambs or sill material can add $100-$800, while extensive water or structural repairs may cost more after the opening is exposed.
New casing or exterior brickmold may add $50-$250 in materials and $100-$400 in installation, depending on the amount and profile. Painting or staining may cost $75-$300 per door when priced separately. Factory-finished products cost more upfront but can reduce on-site finishing work; confirm whether field touch-ups are included.
Hardware costs range from about $25-$100 for basic interior knobs and hinges to $100-$400 for exterior locksets or decorative hardware. Smart locks can add $100-$350, not including installation or any required wiring. Screens, upgraded thresholds, privacy glass, and matching trim packages can also increase the total.
Permit fees vary by jurisdiction and project scope. A like-for-like door swap may not require a permit in some areas, while structural changes, egress alterations, or work affecting rated openings may trigger review or inspection. Budget $0-$500 or more for permits and related code work, and verify local requirements before ordering.
Ways to lower the price without compromising fit
The most reliable savings come from choosing the necessary configuration and limiting avoidable labor, not from buying a door that does not fit. Measure the existing slab and rough opening carefully, including width, height, thickness, swing, jamb depth, and hinge locations. A wrong size or handing can lead to restocking charges, delays, and additional labor.
If the frame is in good condition, price a compatible slab before replacing the whole assembly. For a sound standard opening, a hollow-core interior model can be suitable where sound isolation is not a priority; solid-core construction may be worth the added price for bedrooms or privacy. Compare comparable materials and configurations rather than using a low-cost slab quote against a complete prehung installation.
Keep the scope clear. Reuse serviceable hardware where compatible, avoid decorative glass or premium trim that is not required, and ask for optional painting, lock upgrades, and casing as separate line items. Preparing access to the opening and moving furniture before the crew arrives can reduce billable time, but removal of structural components should be left to the installer.
Get at least three itemized quotes for an exterior or patio replacement. Compare product specifications, installation method, flashing, disposal, warranty coverage, and exclusions—not just the total. Scheduling outside peak remodeling periods may improve contractor availability, though weather and local demand make seasonal savings inconsistent. Budget check: compare the complete installed scope, with tax and delivery, rather than the door-only price.