A Jenn-Air JES9800CAS is a 30-inch electric downdraft range, and its price depends heavily on condition because the model is discontinued. Buyers typically see used units around $500-$1,500, while a tested or refurbished range may cost $1,200-$2,500; delivery, installation, and venting work can add several hundred dollars. Condition, working downdraft ventilation, and local availability drive the largest price differences.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used JES9800CAS range | $500 | $1,000 | $1,500 | Working unit, usually sold locally |
| Tested or refurbished range | $1,200 | $1,800 | $2,500 | Price depends on parts, service, and warranty |
| Delivery and installation | $150 | $350 | $800 | Higher when vent or electrical work is needed |
| Repair, common service visit | $150 | $350 | $900 | Parts and labor vary by failure |
| Comparable new downdraft range | $2,500 | $3,500 | $5,000+ | Current products may differ in fit and features |
What a JES9800CAS costs as a used downdraft range
For a complete, operating JES9800CAS in typical used condition, a reasonable purchase budget is $500-$1,500 before delivery. Around $500-$800 is more common for an older unit with cosmetic wear, limited testing, or a seller who expects local pickup. A clean unit with verified burners, oven, controls, and fan can reach $1,000-$1,500.
Tested and refurbished examples can be listed for $1,200-$2,500, especially when the seller includes a short warranty, replacement parts, or delivery. These asking prices do not guarantee a sale at that amount. Because the model is discontinued, available listings are sporadic, and one unusually high listing does not establish a reliable market price.
For budgeting, use roughly $1,000 for a used working range and treat unusually high asking prices as negotiable. Confirm the complete model number, including any suffix, because JES9800CAS versions and production revisions may not share every part. Assumptions: complete 30-inch electric range, ordinary used condition, no major repairs, and a local U.S. purchase.
How the appliance, labor, and vent work shape the quote
A purchase quote is only part of the installed cost. The range must fit the opening, connect to the correct electrical circuit, and exhaust through a compatible downdraft duct or approved arrangement. A seller may quote only the appliance, while an installer’s estimate can include removal, delivery, hookup, and modifications.
| Quote item | Typical low | Typical average | Typical high | What changes the charge |
|---|---|---|---|---|
| Used range | $500 | $1,000 | $1,500 | Testing, condition, parts, and local supply |
| Delivery and handling | $75 | $175 | $350 | Stairs, distance, and appliance weight |
| Removal and disposal | $40 | $100 | $200 | Haul-away rules and access |
| Installation labor | $100 | $225 | $450 | Fit, hookup, and leveling requirements |
| Electrical or duct changes | $0 | $300 | $1,200+ | Existing circuit, route, and code requirements |
Standard installation may cost $100-$250 when the range is a direct replacement and the outlet, circuit, opening, and vent connection are already suitable. Electrical work can add $150-$600 if a receptacle or circuit needs changes. Duct adjustments can range from $150-$800 or more, depending on access and route length.
Ask whether the quote includes delivery, haul-away, electrical hookup, and reconnecting the downdraft duct. Appliance installers commonly charge about $75-$150 per hour, though many use a flat installation fee.
Which JES9800CAS condition and vent specifications raise the price?
Operational condition is the first pricing divider. A range that heats correctly but has worn trim may still be a practical purchase; one with an untested oven, dead display, or failed fan creates repair risk. A control-board or glass-cooktop problem can cost several hundred dollars, and discontinued parts may be difficult to locate.
The downdraft system is a second major driver. Confirm that the fan operates at each available setting and that the duct outlet, blower arrangement, and home’s existing vent path match the installation. A disconnected or blocked duct is not a minor cosmetic issue: correcting a difficult route can add hundreds of dollars.
Measurements matter as well. The JES9800CAS is a 30-inch class range, but installers still need the actual cutout width, counter height, depth, and clearance. A difference of even a fraction of an inch can require cabinet or countertop work. If the existing opening needs more than a small adjustment, carpentry or countertop labor can add $200-$1,000 or more.
Pay more only when the seller can demonstrate the oven, cooktop, controls, and downdraft fan working. A recent service record or return window is valuable; a claim that the appliance “worked when removed” is less reassuring than a powered test. Confirm that racks, trim, and any required blower components are included.
Why regional labor and local supply change the installed price
Used appliance prices depend on how many downdraft ranges are available nearby. In large metro areas, more listings and repair businesses can give buyers several choices, but labor and delivery rates often run 10%-25% above national-average planning figures. In rural areas, hourly rates may be lower, yet a long delivery distance or limited technician availability can erase that difference.
Coastal markets and high-cost cities may see installation labor 15%-30% above a typical midrange quote. In parts of the Midwest and South, straightforward appliance installation can be closer to the lower end, although this is not guaranteed. A specialist familiar with older Jenn-Air products may charge a higher diagnostic fee, but may be more able to identify compatible parts.
Local supply affects the appliance itself, too. When only one unit is listed within practical driving distance, the seller may ask a premium; buyers should compare the total delivered cost rather than the sticker price. Use a 10%-25% local labor adjustment as a planning range, then obtain a quote for the actual address and vent layout.
What delivery, removal, and diagnostic fees add
Because this is a heavy freestanding or slide-in appliance, delivery can cost $75-$350 for a nearby trip, with extra fees for stairs, long carries, or a tight doorway. Some sellers offer curbside delivery only. Bringing the range into the kitchen and positioning it in the opening may be a separate $50-$150 service.
Hauling away an old range commonly adds $40-$200. Local recycling rules and the condition of the old appliance affect the fee. If a technician is needed to inspect a used range before purchase, expect roughly $75-$150 for a basic diagnostic visit, with repair labor and parts billed separately.
For an older range that needs repair, a service call and diagnosis often total $100-$200 before parts. A simple switch or sensor repair may bring the complete bill to $150-$350, while a control board, glass top, or blower-related repair can reach $400-$900 or more. Part availability can make the difference between a repairable appliance and an uneconomical one.
Get the final delivered-and-installed total in writing before paying a deposit. Specify whether the price covers stairs, connection, vent testing, leveling, removal, and any return or cancellation fee.
Repairing this Jenn-Air versus buying another downdraft range
Repair is often worth pricing when the JES9800CAS has a single, clearly diagnosed fault and the cooktop, oven cavity, and fan are otherwise sound. A repair under $300 can be sensible for a range in good condition, particularly if it avoids a difficult cabinet or vent conversion. A $400-$900 repair deserves comparison with the appliance’s age, remaining condition, and replacement options.
New downdraft ranges are a narrower and generally more expensive market than standard electric ranges. A comparable new unit may cost about $2,500-$5,000 or more before installation, and a different model may not match the existing opening or duct connection. A conventional electric range can cost less, but replacing downdraft ventilation with a hood or other arrangement may require additional work.
Compare the repair estimate with the complete replacement project, not just the replacement appliance’s price. A $1,200 used range plus $500 in delivery and modifications is a $1,700 purchase, while a repair quote should be judged against the remaining useful life and condition of the whole unit.
Three realistic JES9800CAS purchase and installation budgets
A local pickup example might include a tested range for $700, a $125 service visit before purchase, and $150 for a two-person delivery. The estimated total is $975 if existing electrical and vent connections are compatible and the buyer handles installation. This is a lower-cost scenario, but it offers less protection if no warranty is included.
A typical direct-replacement project could involve a clean used range at $1,100, $175 delivery, $100 haul-away, and $225 installation. The total is about $1,600 before tax or unexpected work. This assumes the appliance fits the existing 30-inch opening and both the circuit and duct can be reused without alteration.
A more involved project could start with a refurbished unit at $1,800, then add $250 delivery, $150 removal, $350 installation, and $500 in duct or electrical changes. That brings the estimate to $3,050 before tax. If a countertop or cabinet modification is necessary, the total could rise further.
These examples show why a low appliance listing is not necessarily the lowest installed price. Request a separate line for the range, transport, installation, parts, and modifications so competing quotes can be compared on the same scope.
Ways to lower the price without risking a bad fit
Measure the opening and confirm the electrical and duct setup before shopping. Share those details, photos, and the full model number with the seller or installer. This reduces the chance of paying for a delivery that ends with a return, extra trip, or last-minute cabinet work.
Compare at least three complete quotes when possible, including local appliance dealers, independent installers, and the seller’s delivery option. Ask for the appliance’s tested functions, warranty length, return terms, and exact delivery scope. A slightly higher price can be preferable if it includes a meaningful parts-and-labor warranty.
Keep the project to a like-for-like replacement when the current vent and electrical setup are safe and code-compliant. Avoid paying to reroute ductwork or upgrade finishes unless the existing arrangement requires it. If the range has one repairable fault, obtain a diagnosis before replacing the entire appliance, but do not buy an untested unit solely because it is cheap.
The safest savings usually come from verifying fit and condition before purchase, rather than skipping installation checks. A modest inspection or diagnostic fee can prevent a larger loss when a discontinued range has missing parts or a failed downdraft blower.