A new Jøtul F 602 V2 wood stove typically costs about $1,800-$2,500 before installation; a complete installed project commonly runs $3,000-$6,500. The final price depends mainly on the dealer’s stove price, chimney and hearth requirements, labor rates, and whether an existing venting system can be used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New F 602 V2 stove | $1,800 | $2,150 | $2,500 | Retail price before delivery and installation |
| Basic installation | $900 | $1,800 | $3,000 | Assumes suitable existing chimney and hearth |
| New chimney and installation | $2,000 | $3,500 | $5,500 | Varies with height, roof access, and parts |
| Typical total project | $3,000 | $4,800 | $8,000 | Higher totals reflect substantial venting or hearth work |
| Used or older 602 | $300 | $800 | $1,500 | Condition, age, and included parts affect value |
Assumptions: U.S. pricing, standard residential installation, and no major structural repair. Regional dealer prices and local code requirements can shift these estimates.
What a new Jøtul F 602 V2 typically costs
The Jøtul 602 is a compact cast-iron wood stove, and the current F 602 V2 is the new-production model buyers should compare when checking dealer quotes. A realistic stove-only budget is $1,800-$2,500, with roughly $2,150 a useful planning average. Freight, delivery, tax, and accessories may be additional, so the advertised stove price is not necessarily the amount due at pickup.
The F 602 V2 is designed for smaller spaces than many full-size wood stoves. Its relatively compact firebox and heating capacity make room size, insulation, layout, and climate important when deciding whether it suits a home. A stove that is undersized for the space may not meet heating expectations, while a larger model can cost more and may be harder to operate efficiently in a small room.
Older Jøtul 602 models are often found used, but they are not interchangeable with a new stove for pricing or installation purposes. A used unit can cost less upfront, yet its condition, certification, available parts, and suitability under local rules should be verified before purchase. Compare the exact model and production generation, not just the “602” name.
How stove, hearth, chimney, and labor shape the quote
A stove installation quote combines the appliance with the work and materials needed to vent it safely. The following ranges are broad U.S. estimates; they assume ordinary residential access and do not include extensive masonry or roof reconstruction.
| Quote component | Typical price | Pricing basis | What can change it |
|---|---|---|---|
| F 602 V2 stove | $1,800-$2,500 | Per stove | Dealer pricing, freight, included parts |
| Chimney liner or connector | $300-$1,500 | Per installation | Diameter, length, liner type, chimney condition |
| Class A chimney system | $800-$2,500 | Per system | Height, roof penetration, offsets, support parts |
| Hearth pad or floor protection | $200-$1,000 | Per project | Required dimensions and finish material |
| Installation labor | $700-$2,000 | Per project | Crew size, access, removal, and venting work |
| Delivery and old-stove removal | $100-$600 | Per project | Distance, stairs, weight, disposal rules |
Some quotes bundle the liner, connector, labor, and delivery into one installation charge. Requesting an itemized estimate helps show whether a low initial price excludes necessary chimney parts or whether two contractors are pricing different scopes. The venting system and installation labor can cost as much as, or more than, the stove itself.
Labor rates commonly fall around $75-$150 per technician-hour, although many installers quote by the job rather than by the hour. A straightforward installation may require a small crew for several hours; a new chimney route or difficult roof access can extend the work to a full day or longer.
How chimney height and 6-inch venting change the price
Chimney condition is one of the largest price variables. If an existing masonry chimney is sound and can accept a properly sized liner, the project may avoid the expense of a complete new chimney. If it is unlined, damaged, oversized, or unsuitable for the stove, a stainless-steel liner or other corrective work may be required.
For many wood-stove installations, the connector and chimney system are sized to the appliance’s specified flue outlet; a 6-inch system is common for this class of stove, but the owner’s manual and local code control. A longer run, multiple offsets, or a chimney that rises well above the roofline requires more pipe, supports, and labor. Each added chimney section can increase both material cost and roof-access labor.
Hearth protection and clearances also affect the estimate. If the existing floor protection does not meet the stove’s listed requirements, a larger pad or a different assembly may be needed. Moving a stove closer to a wall is not a substitute for meeting the manufacturer’s clearance specifications; approved heat shields may help only when the model instructions and local code allow them.
Site access can add expense even when the stove itself is small. Narrow stairs, a second-floor installation, a steep roof, or a long carry from the delivery vehicle may require additional workers or handling equipment. Quotes for a ground-floor installation with a straight chimney should not be compared directly with quotes that include challenging access or new roof penetrations.
Control installation scope before choosing the lowest quote
The most controllable cost decision is often the installation scope, not bargaining over the stove alone. Ask whether the quote includes a site visit, chimney inspection, liner, connector pipe, hearth protection, delivery, old-unit removal, permit fees, and final inspection. Compare complete, code-compliant scopes rather than the bottom-line number by itself.
If the home already has a suitable chimney and compliant hearth, retaining them can avoid significant replacement costs. Have a qualified installer confirm their condition and suitability first. A chimney that appears usable from the room may still need cleaning, inspection, relining, or repair before it can safely serve a wood stove.
Standard finishes and required components usually offer better savings than removing safety-related parts or choosing a stove that does not fit the space. Avoid paying for decorative accessories or upgraded trim unless they solve a real need. Likewise, do not assume that a larger stove is a better value: oversizing can lead to operation at low burn rates, and it does not reduce chimney installation costs.
Collect at least two or three itemized estimates based on the same stove model and installation plan. Ask each installer to state the venting diameter, liner length, hearth work, labor, and any exclusions. If quotes differ sharply, check whether the lowest estimate omits a permit, chimney work, disposal, or inspection rather than assuming it is simply a better deal.
How long Jøtul 602 installation and labor may take
A basic replacement in a prepared location can often be completed in about 4-8 hours, including moving the stove, connecting the vent, and checking clearances. A new chimney installation or substantial hearth work commonly takes 1-2 days, depending on the roof route, weather, crew availability, and inspection schedule.
Installers may charge a minimum service or site-visit fee, often around $100-$300, particularly when diagnosing a chimney or preparing a separate estimate. A full installation labor charge may be fixed even if the crew finishes faster than expected, so the proposal should identify whether labor is hourly or priced as a package. Ask what triggers extra labor charges before work begins.
Scheduling can affect the practical timeline. Late summer and fall are busy periods as homeowners prepare for heating season, and an installer may book several weeks ahead. A rush visit or urgent work during peak demand can cost more, while scheduling well before cold weather may provide more choice of appointment dates.
How Jøtul 602 prices differ across U.S. regions
Stove prices can vary by dealer, freight distance, and regional inventory, but installation labor and chimney conditions often create larger geographic differences. In lower-cost rural and Midwest markets, labor may run about 10%-20% below a large coastal metro estimate. In high-cost Northeast, Pacific Coast, or major urban areas, labor and permitting can run 15%-35% higher than a national middle estimate.
Those percentages are planning comparisons, not fixed regional price rules. A rural property may have lower hourly rates but higher delivery charges or fewer qualified installers. An urban home may have higher labor rates, more complex access, and stricter permitting, yet a nearby dealer can reduce freight expense.
Climate and local construction patterns matter, too. A home with an existing masonry chimney may need different work than a house requiring an exterior Class A chimney. A long roofline route, snow-season scheduling, or local requirements for inspection can change the quote more than the state-level average. Use local itemized bids to replace national ranges before setting a final budget.
New F 602 V2 versus a used Jøtul 602
Used Jøtul 602 stoves commonly list for about $300-$1,500, with older or incomplete units at the low end and cleaner examples with parts at the high end. A used stove may need new firebricks, gaskets, hardware, or professional inspection. These repairs can add roughly $100-$600, and a damaged or unsuitable unit may not be economical to restore.
A new F 602 V2 costs more upfront but comes with current product documentation and a manufacturer warranty according to its terms. Used-stove warranties may be absent, limited, or unavailable. Before paying for an older unit, verify the model, condition, parts availability, and whether it can legally be installed in the intended location; applicable emissions rules and local regulations can differ.
Installation costs do not necessarily fall when the stove is purchased used. A qualified installer may still charge for inspection, connection, and chimney work, and some installers may decline customer-supplied appliances. Compare the used stove’s purchase price plus repairs and installation against a new unit’s complete project price.
Extra charges for permits, chimney work, and removal
Permit and inspection charges vary by municipality. A permit may cost about $50-$300, while inspection fees can be separate or included. Some local authorities require a permit for a new appliance, chimney alteration, or both; others may have different rules. Confirm requirements with the local building department before work starts.
Chimney cleaning or inspection may add around $150-$400, depending on service scope and access. Masonry repairs, liner removal, roof flashing, or a new chimney penetration can push a project beyond the typical installation range. Removing an existing stove may cost $100-$400, with higher charges for stairs, difficult handling, or disposal.
Tax credits and utility incentives should not be assumed in the budget. Eligibility can depend on the exact stove, installation date, efficiency criteria, and current federal or local rules. Check official program requirements and retain invoices before counting any potential incentive as a reduction in the project’s net price. Confirm fees and incentives directly with the relevant local authority or program administrator.