A used Kenmore 70 Series washer typically costs $100-$400, with many working machines selling for about $250; refurbished units can reach $600. Price depends on the model number, condition, local availability, delivery needs, and whether the buyer is comparing a used washer with a repair or a new replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used washer | $100 | $250 | $400 | Working, tested unit; condition and local supply vary |
| Refurbished washer | $250 | $400 | $600 | May include cleaning, repair, or a short warranty |
| Delivery and hookup | $50 | $100 | $200 | More if stairs, long carries, or removal are involved |
| Common repair | $100 | $225 | $450 | Depends on diagnosis, part availability, and labor |
| New comparable washer | $500 | $800 | $1,200 | Modern top-load model; installation may cost extra |
What a working Kenmore 70 Series washer usually costs
Most buyers should budget $150-$350 for a used Kenmore 70 Series washer that fills, agitates, drains, and spins correctly. A lower-priced machine around $100-$150 may have cosmetic wear, no delivery, or limited testing. A clean, fully tested example with hoses and a short seller warranty can sell for $300-$400, especially where used appliance supply is tight.
These are older top-load washers, and “70 Series” covers multiple models rather than one single specification. Capacity, controls, age, and parts can differ. The full model number, usually found under the lid or on the cabinet, is more useful than the series name when checking compatibility or valuing a particular machine.
Refurbished or dealer-serviced examples commonly fall around $250-$600. The higher price may cover a replaced component, cleaning, delivery, or a limited labor warranty; it does not automatically mean the washer is like new. A fair price depends more on verified operation and repair history than on the Kenmore name alone.
Assumptions: U.S. local-market pricing for a standard-capacity top-load washer, with normal access and no unusual installation work.
How parts, labor, and delivery shape the washer quote
A seller’s asking price is only part of the purchase cost. Delivery, hookup, removal of the old machine, and immediate repairs can add substantially. The table gives typical planning ranges; local appliance shops may set a minimum service charge even when a repair takes little time.
| Quote item | Typical price | What it usually covers | Cost note |
|---|---|---|---|
| Washer purchase | $100-$400 | Used machine sold locally | Test status and warranty affect the price |
| Common parts | $20-$180 | Hoses, lid switch, belt, coupler, or pump | Model-specific parts may cost more or be harder to source |
| Diagnostic and labor | $100-$250 | Service visit and common repair work | Many providers charge a $75-$125 trip or diagnostic fee |
| Delivery and hookup | $50-$150 | Transport and standard connection | Stairs, distance, or tight access can raise the rate |
| Old-unit removal | $25-$75 | Haul-away or disposal | May be included with delivery or charged separately |
Parts pricing depends on the exact model, not just the series. A simple hose or belt may be inexpensive, while a motor, transmission, or control-related repair can push the part cost into the $100-$250 range before labor. Discontinued or hard-to-find parts can make a seemingly small repair uneconomical.
Labor commonly runs $75-$125 per hour, but many appliance technicians bill a flat service fee or set repair price instead. For a rough time-based estimate, use . For example, 1.5 hours at $90 per hour is $135 in labor, potentially plus a diagnostic charge and parts. Ask whether the quote includes the visit fee, parts, labor, and a return visit before approving work.
How model number, capacity, and condition change the price
The model number identifies the washer’s configuration and helps a buyer verify capacity, parts, and service information. Two machines advertised as Kenmore 70 Series can differ in age and repair needs, so a seller’s broad series description is not enough to justify a premium.
Capacity and physical dimensions matter when the washer must fit a specific laundry area. Confirm the machine’s width, depth, and water connections before arranging delivery. A larger-capacity model may be more useful for bulky loads, but the used-market price premium is usually less important than condition and a successful test cycle.
Condition should be judged by operation, not appearance alone. Check for excessive noise during spin, water left in the tub, leaks beneath the cabinet, a burning smell, and a lid switch that fails to stop the washer when opened. Rust at the cabinet base or a strong musty odor can also indicate a problem that cleaning will not resolve.
Age affects both reliability and parts availability. A washer that has been stored or unused for a long period may still have dried hoses, corroded connections, or a pump issue. Ask how recently it was operated and whether the seller has completed a full wash and spin test. A $300 unit that completes a test cycle can be a better buy than a $125 unit with unknown symptoms.
Local market supply creates another meaningful difference. In areas with few used-appliance listings, tested units may be priced 10%-25% above comparable listings in a larger metro area. Rural buyers may pay less for the machine but more for transport or a technician’s travel charge. Compare delivered prices rather than listing prices alone.
How to lower the Kenmore 70 Series purchase cost
Set a total budget before negotiating. Add the washer price, delivery, hookup, removal, and any known repair estimate. A $200 listing can exceed a $350 delivered unit if it requires a long-distance pickup, new hoses, or an immediate service call.
Ask the seller to demonstrate filling, agitation, draining, and spinning. If a full cycle is not practical, request a short test of each function and inspect beneath the washer for leaks. Confirm whether hoses are included and whether the seller offers a return period. A modest premium for a documented test can reduce the risk of paying for transport twice.
Compare at least three listings for the same general condition and include local appliance stores, resale shops, and private sellers. Private sellers may price lower but often provide no warranty or delivery. A dealer may charge more while including setup or a limited warranty, so compare what each quote actually covers.
Keep the purchase scope simple. Reuse compatible hookups only if they are in sound condition, but do not reuse cracked or corroded hoses just to save a small amount. If delivery includes installation, verify that the service covers leveling and connecting the drain hose. Controlling delivery and verifying function usually save more than bargaining over a small difference in the sticker price.
What three realistic washer quotes look like
The following examples show how condition, included work, and transport change the final budget. They are illustrative estimates, not set prices for every market or model.
| Example | Washer and work | Estimated total |
|---|---|---|
| Local private sale | $150 washer, buyer pickup, $25 hoses | $175 |
| Tested dealer unit | $325 washer, $75 delivery, $25 hookup supplies | $425 |
| Repair before use | $175 washer, $90 service visit, $80 part, $100 labor | $445 |
In the private-sale example, the low total assumes the buyer has a suitable vehicle and can safely move the washer. The dealer example costs more but includes delivery. In the repair example, the total is worthwhile only if the diagnosis confirms a limited fault and the rest of the washer is in good condition.
For a higher-cost dealer quote, request an itemized estimate. A $500-$600 refurbished machine may be reasonable if it includes reliable delivery, testing, and a clearly stated warranty. Without those inclusions, it may be priced close to a new basic washer without offering comparable protection.
When a repair costs less than replacing this older washer
Common minor repairs such as a lid switch, hose, belt, or simple drain component may cost roughly $100-$250 installed, depending on the model and technician. A repair in this range can make sense when the washer has otherwise operated well and the technician can confirm that the part is available.
More extensive work involving a transmission, motor, or multiple failing components can reach $300-$500 or more. That can exceed the value of many used Kenmore 70 Series machines. Before authorizing expensive work, compare the complete repair estimate with the delivered price of another tested used washer and the price of a new model.
Repair economics also depend on the symptom. A washer that will not drain might need a relatively inexpensive pump or may have a blockage; diagnosis matters. A machine that leaks, makes loud spin-cycle noise, and has visible corrosion may need several repairs, making replacement more sensible even if each individual part is available.
When comparing a new replacement, basic top-load washers often cost about $500-$1,200 before delivery, depending on capacity, features, and retailer. A new washer usually offers a manufacturer warranty and current parts support, but it is a larger upfront expense. Use the full repair total—not just the price of one part—to decide whether to keep the older washer.
What delivery and installation add to a used washer
Local delivery commonly adds $50-$150, while a difficult carry or distant trip can raise the charge to $200 or more. Stairs, narrow doorways, basement laundry rooms, and long paths from the truck may require extra labor. Provide access details when requesting a quote so the delivery price is not based on an easy ground-floor drop-off.
Standard hookup may cost $25-$75 when it is not included with delivery. This generally assumes existing water valves, drain, and electrical outlet are usable and positioned correctly. New hoses may add $15-$40, while plumbing adjustments or electrical work are separate expenses and should be quoted by the relevant trade.
Old-unit removal typically costs $25-$75, although some retailers include it with delivery or waive the fee under specific conditions. Confirm whether removal includes carrying the old machine out, disposal, and disconnecting the existing connections. Get one delivered-and-installed total so the price comparison includes every required service.
How Kenmore 70 Series prices compare by seller type
Private listings often have the lowest sticker prices, roughly $100-$300, but the buyer may need to arrange transport and accept an as-is sale. This route can be cost-effective when the washer can be tested in person and pickup is easy. It carries more risk if the seller cannot demonstrate a complete cycle.
Used-appliance stores and refurbishers commonly ask $250-$600. The higher price may include inspection, cleaning, delivery, or limited warranty coverage. Read the warranty terms: a short parts-only warranty is not the same as coverage for labor, pickup, or replacement if the washer fails soon after purchase.
New basic top-load washers generally start around $500-$700, with many midrange choices reaching $800-$1,200. A new model is not a direct equivalent in age or design, but it may provide stronger warranty coverage and easier parts access. Compare the cost of a used unit plus likely repairs against a new unit’s purchase, delivery, and installation charges.
Local pricing can shift by roughly 10%-25% with supply, demand, and distance. Big-city buyers may find more listings and competition, while rural buyers may face higher delivery or repair travel charges. The best comparison is the total cost to place a working washer in the laundry room, with warranty and repair risk noted separately.