A used Kenmore 80 Series washer typically costs $100-$400, while a tested or refurbished unit can reach $250-$600; delivery and repairs may add substantially to the bill. The Kenmore 80 Series is an older product family rather than one uniform model, so condition, exact model number, capacity, local availability, and whether the sale includes installation drive the price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used washer, pickup | $100 | $250 | $400 | Working unit, typically sold as-is |
| Tested or refurbished washer | $250 | $400 | $600 | May include a short seller warranty |
| Delivery and hookup | $75 | $150 | $300 | More for stairs, long carries, or removal |
| Common repair | $120 | $250 | $450 | Parts and labor; major failures can cost more |
| New comparable top-load washer | $500 | $800 | $1,200 | Current models, not a new 80 Series |
Assumptions: U.S. prices for a standalone top-load washer; tax, unusual access, and extensive repairs are excluded unless noted.
What a Kenmore 80 Series washer costs used
For a washer that fills, agitates, drains, and spins correctly, a typical private-sale price is $150-$350 when the buyer collects it. A clean, recently tested machine with a matching model number and clear operating history may sell for $300-$400. Units priced below $100 are often untested, need repair, or are being cleared quickly.
Refurbished-appliance sellers commonly ask $250-$600. The higher price may include cleaning, replacement of a worn component, delivery, or a limited warranty, but those inclusions vary. A listing that says “works” without explaining what was tested should not be priced like a documented refurbishment.
For a typical working unit, budgeting around $250 before delivery is a reasonable starting point. Check the model tag and compare prices for the same capacity and configuration. The series name alone does not establish the washer’s age, condition, capacity, or parts compatibility.
These washers are older, and sellers may not know their full repair history. A low purchase price can become poor value if a pump, transmission, control, or tub-related problem appears soon after purchase. Ask to see a complete wash and spin cycle, and do not assume an old appliance has the same remaining life as a new one.
Which washer parts and labor appear on a repair quote?
Repair estimates depend on diagnosis, local service rates, and part availability for the specific model. A technician may charge a diagnostic or trip fee even when the buyer declines the repair. The table gives broad U.S. planning ranges, not guaranteed prices for every 80 Series configuration.
| Quote item | Typical price | What can change it |
|---|---|---|
| Service call and diagnosis | $75-$150 | Travel distance, provider minimum, and whether credited toward repair |
| Common parts | $20-$180 | Part type, availability, and whether a compatible replacement exists |
| Technician labor | $100-$300 | Repair difficulty and roughly 1-3 hours of work |
| Drain pump replacement | $150-$350 total | Pump cost, access, and service-call policy |
| Major drive or transmission work | $300-$600+ total | Model design, parts supply, and labor time |
Typical appliance-repair labor rates are about $75-$150 per hour, often subject to a one-hour minimum.
Request a written estimate that separates diagnosis, parts, labor, and any warranty. For an inexpensive washer, a $350 repair can approach or exceed the cost of another working used unit. Confirm whether the technician has identified the failed component and whether the quote includes a return visit if the first repair does not solve the problem.
How capacity, model number, and condition shift the price
“80 Series” covers multiple Kenmore models and configurations. Some models have a direct-drive design; others may differ in controls, capacity, or components. The full model number, usually found on a label near the lid opening or cabinet, is more useful than the series name when checking repair parts, age, and comparable sale listings.
Capacity can influence asking price, but condition usually matters more. A larger tub may be attractive to households washing bulky items, yet an extra $50-$100 is hard to justify if the unit is noisy, leaks, or has no test history. Ask for the claimed capacity in cubic feet and verify it against the model information rather than relying on a seller’s estimate.
Visible rust, a damaged lid, musty odor, cabinet dents, or a washer that walks during spin can lower value by $25-$150 or more. A machine that fills and drains but does not agitate is not fully functional; possible causes range from a modest repair to a costly drive-system problem. Water remaining in the tub, burning smells, or heavy bearing-like noise warrant caution.
Age and operating condition outweigh cosmetic upgrades when setting a fair price. A documented replacement part can support a higher asking price only if the repair is relevant and the seller can identify when it was completed. Because component availability varies, check the exact model before assuming a repair will be straightforward.
What delivery, hookup, and removal add to the bill
Local delivery for a used washer often runs $75-$200, with hookup adding around $25-$100 if the seller or appliance service provides it. A delivery company may charge more for stairs, a long distance from the truck, tight turns, or a second person. A job requiring a new drain, outlet, or water-supply work is a separate plumbing or electrical expense.
Hauling away an old washer may cost $25-$100, though some delivery providers include removal when replacing an appliance. Confirm that the fee covers carrying the washer out of the home and that the old unit will be accepted. Local disposal rules may affect the service and price.
Before paying, measure the doorways, hallways, and laundry-area opening, and check that the washer fits the available space. Confirm hose condition, drain location, and whether the delivery crew will connect the machine. A washer sold “delivered” may mean curbside drop-off rather than placement and hookup.
Delivery and access can add as much as $300 to a low-priced purchase. Include these charges when comparing a nearby private sale with a refurbished unit that has delivery and basic setup bundled into its price.
Why Kenmore 80 Series prices vary by U.S. market
Used-appliance prices reflect local supply as much as the machine itself. In large metro areas, refurbished inventory and delivery services may be easier to find, but operating costs can push delivered prices roughly 10%-25% above those in smaller markets. Rural buyers may see fewer listings and longer delivery distances, adding around $25-$100 or more to transport.
Availability can be especially important for an older model. If several working top-load washers are listed nearby, a buyer may have room to negotiate. In an area with few used appliances, a seller may hold firm, but a nearby current-model washer could still be a better comparison after delivery and expected repairs are included.
These percentage differences are planning estimates, not fixed regional rates. City, suburb, and rural prices can overlap, and a well-maintained washer with a clear test record can command more in any market. Compare at least a few local listings and ask whether posted prices include sales tax, delivery, or hookup.
Use local delivered prices, not a national listing, as the real comparison. A $200 washer that costs $150 to transport may be less economical than a $325 unit available for pickup nearby.
When repair costs beat buying another washer
A small repair can make financial sense if the washer is otherwise sound, the part is available, and the technician provides a clear diagnosis. For example, a $150-$250 pump or lid-related repair may be reasonable compared with buying another used washer, especially when the replacement would also need delivery. Ask whether the repair includes a parts-and-labor warranty.
Major drive, transmission, or tub work can cost $300-$600 or more. If the washer itself is worth only about $150-$350 in working condition, a large repair can exceed its resale value. That does not automatically make replacement the right choice, but it does mean the quote should be compared with the full cost of a replacement, including delivery, setup, and disposal.
A new comparable top-load washer typically costs about $500-$1,200 before optional installation or haul-away. New models may offer a manufacturer warranty and more predictable parts support, while a used 80 Series may have a lower purchase price and fewer electronic features. Repair is a riskier bet when the washer has several symptoms or no reliable service history.
Compare the repair total with the replacement’s delivered and installed total, not just its shelf price. For an older machine, a repair above roughly half the cost of a practical replacement deserves careful scrutiny, particularly if other components show wear.
Three realistic quotes for common 80 Series purchases
The examples below illustrate how the same washer family can produce different totals. They assume ordinary access and standard local service; taxes and unusual repairs are excluded. Actual listings and contractor rates vary by market and model.
| Scenario | Price breakdown | Estimated total |
|---|---|---|
| Working private-sale washer, buyer pickup | $200 washer; $25 hoses | $225 |
| Tested washer with local delivery | $350 washer; $100 delivery; $50 hookup | $500 |
| Existing washer needs pump repair | $95 diagnosis; $85 part; 1.5 hours at $110 per hour | $345 |
The first example is lowest only if the machine passes a test and transportation is available. The second costs more but may include basic reassurance from the seller. In the repair example, ask whether the $95 diagnostic charge is included in the repair total; if it is credited, the final bill could be lower by that amount.
Compare each quote on the same basis: working condition, transport, setup, and repair coverage. A seller’s warranty, if offered, should state its duration and what it covers; verbal promises are difficult to evaluate against a written service guarantee.
How to lower the price without buying a problem
Start with the exact model number and a practical inspection. Ask the seller to run a full cycle, including drain and spin, and look for leaks, unusual noise, strong odor, or excessive movement. A lower offer is more defensible when the unit needs cleaning, has cosmetic damage, or lacks hoses, but a suspected mechanical fault should be priced as a repair risk rather than a simple discount.
Pickup can save $75-$200 when safe transportation is available, but account for the cost of a suitable vehicle and help lifting the washer. Do not transport it unsecured or attempt a difficult stair carry without appropriate assistance. If delivery is needed, compare bundled delivery and hookup charges against separate providers before committing.
For repairs, request two written quotes for work expected to exceed $250, and ask whether each includes the diagnostic fee, parts, labor, and warranty. For a purchase, compare the used washer’s all-in cost with a current top-load replacement and avoid paying extra for cosmetic polish or unsupported claims about recent maintenance.
Set a maximum all-in budget before negotiating. Include purchase price, tax, hoses, delivery, hookup, removal, and any immediate repair; then walk away if the total approaches the price of a better-supported alternative.