A Kozy Heat Bayport 36 gas fireplace typically costs about $3,500-$5,500 for the appliance, with a complete installed project often reaching $6,000-$10,000. The final quote depends on the fireplace package, venting route, gas and electrical work, finish materials, local labor rates, and whether an existing fireplace or chimney needs removal or modification.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Bayport 36 appliance | $3,500 | $4,500 | $5,500 | Fireplace unit; options and dealer pricing vary |
| Venting and installation | $1,500 | $3,000 | $5,000 | Higher when the vent route or utility work is complex |
| Finish and surround work | $500 | $1,500 | $3,500 | Tile, stone, mantel, and framing scope vary |
| Typical complete project | $6,000 | $8,000 | $10,000 | Standard installation assumptions; unusual work may exceed this |
What a Bayport 36 fireplace usually costs
The Bayport 36 is a direct-vent gas fireplace, and its quoted price depends on the unit configuration and what the dealer includes. A planning range of $3,500-$5,500 for the appliance alone is reasonable for budgeting, but current availability, dealer inventory, selected options, and freight can move the actual quote.
A straightforward new installation commonly totals $6,000-$8,500 before substantial custom masonry or structural changes. A project involving a long vent run, premium facing, gas-line extension, electrical changes, or removal of an old hearth can reach $10,000 or more. A replacement in an already suitable opening may cost less if the existing framing and utilities can be reused.
Assumptions: U.S. pricing, a standard 36-inch fireplace installation, ordinary access, typical labor rates, and no major structural repair. Prices are estimates, not a confirmed dealer quote.
Buyers should check whether the appliance price includes the required vent components, termination cap, remote or control package, and delivery. Some estimates show the fireplace separately from these items, making an apparently low unit price incomplete for comparison.
How the fireplace, venting, and labor shape the quote
A complete estimate combines the fireplace package with installation materials and skilled work. The following ranges describe common budget allowances; the line items may be grouped differently by each installer.
| Quote component | Low | Average | High |
|---|---|---|---|
| Fireplace and standard options | $3,500 | $4,500 | $5,500 |
| Direct-vent pipe and termination | $400 | $900 | $1,800 |
| Installation labor | $1,000 | $1,800 | $3,000 |
| Gas and electrical work | $300 | $700 | $1,500 |
| Permit, delivery, and disposal | $150 | $450 | $1,000 |
| Surround and finish materials | $500 | $1,500 | $3,500 |
Venting, utility connections, and finish work can add several thousand dollars beyond the fireplace itself. Material allowances overlap in some quotes: for example, a contractor may include a basic surround in labor or list delivery with the appliance. Ask for a written breakdown before comparing totals.
Labor depends on the job, not just the fireplace width. A simple installation can take roughly 10-16 crew hours, while a new framed opening, gas-line extension, or difficult wall penetration may require 20-35 hours across trades. At an illustrative $75-$125 per labor hour, 16 hours represents $1,200-$2,000 before separate materials, permit fees, or specialty work.
Which Bayport 36 specifications and site conditions raise the price?
The vent route is a major cost driver. A short, direct route through an exterior wall can require less pipe and labor than a route with multiple offsets or a longer vertical rise. When the run extends beyond about 10-15 feet or requires several elbows, the installer must verify allowable configurations and may need additional approved components. The manual and local code, rather than a generic price estimate, determine what is permitted.
Opening size and framing also matter. A 36-inch fireplace still needs the manufacturer’s specified clearances and enclosure dimensions; it does not fit every existing 36-inch opening. If the opening is undersized, out of square, or built with combustible materials inside required clearances, reframing or correcting it can add $500-$2,000 or more.
Long vent runs, nonstandard framing, and utility extensions are the most common reasons a basic installation estimate grows. A gas line that must travel 20-30 feet from the existing supply may need additional pipe and labor, while an electrical outlet may need to be added for powered controls or accessories. Local code and the exact product setup determine the final scope.
Finish selection creates another broad price range. Basic noncombustible board and a modest trim treatment may stay near the low end, while stone, tile, custom mantel work, or a floor-to-ceiling feature wall can add $1,500-$3,500 or more. Confirm the manufacturer’s clearance rules before selecting a mantel or combustible trim.
Can an existing fireplace opening reduce installation expense?
Using an existing fireplace location can save money if the opening, vent path, gas supply, and surrounding construction are suitable for the Bayport 36. The savings are not automatic: a masonry chimney may need alteration or a new direct-vent route, and an old gas fireplace may have a different opening size or vent arrangement.
A relatively simple replacement or prepared opening may add about $1,500-$3,000 in installation and connection charges beyond the appliance. A new installation requiring framing, a wall or roof penetration, gas piping, and electrical work may add $3,000-$5,000. Removal of an old unit and disposal may add $300-$1,000, depending on access and material weight.
Have the installer inspect the opening before treating existing construction as a cost saving. The inspection should confirm clearances, dimensions, vent compatibility, hearth requirements, and whether the gas line has adequate capacity. If the chimney or wall contains damage, repairs can erase the expected savings.
For a replacement, ask whether the quote includes removal, capping or adapting old venting, patching the wall, and disposal. Those tasks are often excluded from a fireplace-only price. A contractor should also verify the exact Bayport 36 model and approved vent configuration rather than assuming that an old system can be reused.
How much installation labor and scheduling affect the total
Installation labor commonly runs $1,000-$3,000 for the fireplace work itself, with separate charges possible for a plumber, electrician, mason, or carpenter. A two-person crew may complete a prepared, uncomplicated installation in one working day. New framing and finish work can stretch the project across several days, even when the actual fireplace hookup takes only part of that time.
Rates vary by market and trade. A general planning allowance is $75-$125 per hour for skilled installation labor, with specialty trades or emergency work potentially higher. Some companies quote a fixed project price instead of hourly billing. Either format should specify crew tasks, included hours or scope, and how added work is approved.
Schedule inspection and installation together when possible to avoid a second mobilization charge. A return visit for an incomplete gas connection, missing vent part, or unfinished surround can add $150-$500 or more. Confirm that the fireplace and all required components are on site before the installation date.
During peak heating season, contractor calendars can fill quickly, but the price effect is local rather than guaranteed. Rush scheduling, weekend work, or cold-weather access may carry an added fee. A quote should identify any rush charge, minimum service fee, or extra visit rather than hiding it within a single unexplained total.
What three realistic Bayport 36 quotes can look like
These examples illustrate how scope changes the total; they are not dealer offers. Appliance pricing, local labor, taxes, and availability can differ, so each project needs a site-specific estimate.
| Project scenario | Scope and rate assumptions | Estimated total |
|---|---|---|
| Prepared opening | $4,000 unit, 8-foot vent kit, 12 labor hours at $90 per hour, basic connection | $6,000-$7,000 |
| New exterior-wall install | $4,500 unit, 12-foot vent route, 20 labor hours at $100 per hour, modest facing | $8,000-$9,500 |
| Custom hearth feature | $5,000 unit, extended venting, 30 labor hours at $110 per hour, stone and framing | $11,000-$14,000 |
The opening, vent route, and finish package explain much of the difference between these example totals. The prepared-opening scenario assumes reusable framing and an uncomplicated connection. The custom scenario includes more finish work and should not be compared directly with a basic appliance-and-installation package.
For a useful quote comparison, request the same scope from each contractor: exact model and options, vent materials, labor, gas and electrical work, permits, delivery, removal, finish allowance, and warranty coverage. Ask whether taxes are included and whether the price is fixed or subject to a site-condition allowance.
How Bayport 36 pricing changes across U.S. regions
Labor and delivery can shift the total even when the fireplace package is similar. As a broad budgeting comparison, a straightforward project in a lower-cost rural or smaller-market area may run about 5%-15% below a national midrange estimate. Dense urban markets and higher-cost coastal areas can run 10%-25% above it, especially when parking, access, permits, or specialty labor complicate the work.
Regional differences usually affect installation and logistics more than the basic appliance specification. A $8,000 midrange project might therefore land near $6,800-$7,600 in a lower-cost market or $8,800-$10,000 in a higher-cost market, before unusual site work. These percentages are planning estimates, not fixed regional price lists.
Freight distance and dealer inventory also matter. A unit requiring special order or transport from farther away may carry a delivery charge or longer lead time. In rural areas, a contractor may charge for travel or set a minimum job fee; in a city, building access and disposal rules may add labor or permit expense.
Ask local dealers for a current equipment quote and at least two itemized installation estimates. Compare the same vent route and finish allowance, since a lower labor number may simply exclude gas-line work, permits, or cleanup that another contractor includes.
Which Bayport 36 upgrades and extras are worth pricing separately?
Optional controls, decorative media, trim, and facing can affect the appliance package or the finished project. Depending on the selected options, accessories and upgraded trim may add roughly $100-$800; custom surround materials and installation can add considerably more. Confirm which items are standard in the quoted model rather than assuming a photo shows the base configuration.
Delivery and removal are common overlooked charges. Local delivery may be $100-$400, while removal and disposal of an existing fireplace can add $300-$1,000. A heavy masonry surround, tight stairway, or difficult access can push handling costs higher. Ask whether the quote includes protection for floors and walls and cleanup of packaging.
Price optional finishes separately so the base fireplace and installation remain easy to compare. A quote should distinguish required vent components and code-related work from cosmetic upgrades. Get written approval before adding work discovered after demolition, particularly if the change affects framing, gas piping, or the vent route.
Warranty terms also deserve a line in the estimate. Coverage varies by component and registration requirements, and it may not include labor, annual maintenance, or damage caused by improper installation. Compare the written manufacturer warranty and contractor workmanship coverage rather than assigning a dollar value to an unspecified promise.
How to lower the Bayport 36 quote without compromising safety
Keep the project within a clear scope: choose the opening location, finish level, and required options before requesting bids. A standard finish and a short, approved vent route can avoid custom framing and excess pipe. Do not shorten or reroute venting contrary to manufacturer requirements to save money; an installer must follow the product instructions and local code.
Compare itemized quotes for identical equipment and work, not just the bottom-line price. A lower bid may omit delivery, permit fees, gas-line changes, or the surround. Ask each contractor to state the model, vent parts, labor scope, allowances, exclusions, and process for approving unexpected charges.
Complete reasonable site preparation only when the installer approves it. Clearing access and moving furniture may reduce setup time, but homeowners should not remove framing, disconnect gas, or alter venting unless the contractor specifically directs safe work. Bundling related finish work may reduce repeat trips, while unrelated upgrades can make the budget harder to track.
Finally, compare repair with replacement if the project involves an existing gas fireplace. A qualified technician can diagnose whether a service repair is practical, but the Bayport 36 may require a new opening or vent system rather than a simple insert swap. Confirm compatibility before buying the appliance; a low equipment price does not save money if the installation is unsuitable.