A Kubota finishing mower typically costs $2,200-$5,500 new, with a middle-of-the-range price near $3,500 for a common 60- to 72-inch unit. The final quote depends mainly on deck width, mower model and compatibility, dealer freight, and whether setup or repairs are included.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Kubota finishing mower | $2,200 | $3,500 | $5,500 | Typical dealer pricing; model and width affect cost |
| Used Kubota finishing mower | $700 | $1,800 | $3,500 | Condition, age, and included driveline matter |
| Dealer setup and delivery | $100 | $350 | $800 | Local pickup may reduce or avoid delivery fees |
| Blades and routine service | $50 | $180 | $450 | Blade count and service scope vary |
What a 60- to 72-inch Kubota Finishing Mower Costs
For a new rear-mounted Kubota finishing mower, a practical budget is $2,200-$5,500 before sales tax. Many buyers looking at a standard 60- or 72-inch mower will see quotes around $2,800-$4,200, depending on model availability, dealer pricing, and included setup. Wider or less common configurations can exceed that range.
Used units often sell for $700-$3,500. A working older mower with worn paint or blades may fall near the low end; a newer, clean unit with straight deck components and a good driveline can approach the price of a discounted new mower. Verify the exact model and parts availability before comparing a used asking price with a new quote.
Finishing mower prices are sometimes listed by deck width, but width alone does not determine compatibility or value. A mower’s hitch arrangement, PTO shaft, required horsepower, and condition all affect its usefulness and total expense. For a typical new 60- to 72-inch unit, about $3,500 is a reasonable planning figure, not a guaranteed dealer price.
Assumptions: U.S. dealer purchase, standard rear-mounted mower, ordinary setup, and no major tractor modifications.
Which Deck Width Fits the Budget and Tractor
Smaller decks generally cost less, but the right size depends on the tractor’s capability and the area being mowed. A 54-inch mower may suit a compact tractor and narrow access; a 60-inch model is a common match for smaller properties; and a 72-inch deck can cover more ground when the tractor has sufficient PTO horsepower and lift capacity.
As a broad estimate, new pricing may run $2,000-$3,200 for a smaller 54- to 60-inch configuration, $2,600-$4,400 for many 60- to 72-inch models, and $3,800-$5,800 or more for larger or less commonly stocked equipment. These are planning ranges, not a Kubota price list. A dealer quote for the exact mower model should take precedence.
Check the tractor operator’s manual and mower specifications together. PTO horsepower is not the same as engine horsepower, and a mower that is too wide or heavy can produce poor results or exceed the tractor’s operating limits. Confirm PTO power, hitch category, shaft length, and lift capacity before paying for a larger deck.
A mower that is too small can add mowing time, while an oversized deck can leave an uneven cut or strain the tractor. Measure gates, trailer space, and the narrowest mowing routes as well as the lawn. If the tractor will mow rough ground or steep slopes, ask the dealer whether the particular mower and operating setup are appropriate.
How Deck, Driveline, and Dealer Charges Shape the Quote
A purchase quote can combine the mower itself with freight, preparation, attachment setup, and delivery. Request an itemized estimate so the listed mower price can be compared with another dealer’s offer. The following ranges are approximate; a dealer may bundle some costs or include them in a discounted package.
| Quote item | Typical range | What can change it | Price basis |
|---|---|---|---|
| Mower and cutting deck | $2,200-$5,500 | Width, model, inventory, and dealer discount | Per mower |
| PTO driveline or replacement shaft | $150-$500 | Fit, guards, and whether a shaft is included | Per shaft or assembly |
| Dealer setup and inspection | $75-$250 | Assembly, adjustment, and shop labor | Per unit |
| Freight or local delivery | $0-$550 | Distance, route, and dealer policy | Per delivery |
| Replacement blades | $25-$90 | Blade type and quantity required | Per blade or set |
| Sales tax | About 0%-10% | State and local tax rules | Percent of taxable sale |
Labor is most relevant when the dealer must assemble the mower, adjust the hitch, inspect the driveline, or troubleshoot an older tractor’s attachment setup. A simple setup may take 1-2 hours; an unusual fit or missing parts can take longer. At $75-$140 per shop hour, 1-3 hours of labor would add roughly $75-$420 if billed separately.
Ask whether the quoted price includes the PTO shaft, guards, pins, and any required hardware. A low advertised price can become less attractive if the driveline must be purchased separately or freight is substantial. Compare the complete ready-to-mow price, not only the mower’s base price.
When Tractor Fit and Mowing Conditions Raise the Price
Tractor compatibility is one of the most important cost variables. If the mower matches the tractor’s PTO output, hitch, and lift capacity, installation may be straightforward. If the shaft is wrong, the hitch needs adjustment, or an older tractor requires replacement parts, the bill may increase by $150-$700 or more, depending on parts and shop time.
Deck width creates another clear price threshold. Moving from a 54- or 60-inch deck to a 72-inch model can add several hundred dollars, and wider equipment may require a more capable tractor. A deck around 84 inches, where offered and compatible, can push pricing beyond $5,000. Confirm actual specifications and availability for the specific Kubota mower model rather than assuming all widths are offered in every product line.
Ground conditions affect both selection and upkeep. A smooth lawn with few obstacles is easier on blades and deck components than a field with ruts, hidden stones, or frequent wet patches. Repairs after striking an object can run $100-$600 for blades, spindle components, belts, or shop labor; bent or badly damaged deck parts can cost more.
Distance to the dealer is a smaller but visible factor. Local pickup can save $100-$550 when delivery is charged, but only if the buyer has a suitable trailer and safe tie-down equipment. The biggest avoidable fit expense is buying a mower before confirming the tractor’s exact model and PTO specifications.
What Dealer Setup and Mowing Labor Usually Add
Most finishing mower purchases do not require a separate installation contractor. The tractor operator attaches the mower, connects the PTO shaft, and adjusts cutting height according to the manuals. A dealer may charge $75-$250 for setup and inspection, particularly when the mower needs assembly or the buyer requests an initial fit check.
Delivery often costs $100-$550 within a dealer’s normal service area. A nearby drop-off may be included in a package, while a remote address, limited access, or an urgent delivery request can raise the fee. Ask whether delivery includes unloading and placement or only transport to the property entrance.
For ongoing mowing, a finishing mower’s operating cost includes fuel, blades, belts, and occasional service. Routine blade replacement may cost $50-$180 for a basic set, while a more extensive service involving belts, bearings, or spindle work may reach $200-$600. These figures depend heavily on the mower model and whether work is performed by an owner or shop.
Travel time and mowing speed depend on grass height, terrain, obstacles, and the tractor. A wider deck may reduce passes on open ground, but can be less convenient around trees and narrow gates. Include setup and delivery in the purchase budget, then treat maintenance as a separate ownership expense.
New Versus Used Kubota Finish Mowers at Similar Prices
A used mower is most compelling when its condition is verifiable and the asking price leaves room for immediate service. At $700-$1,500, older examples may need blades, belts, tires, or driveline work. A clean used unit around $1,500-$2,800 may offer better value if the deck is straight, spindles turn smoothly, and safety guards are intact.
New equipment at $2,200-$5,500 typically offers unworn parts and a dealer-supported purchase, though warranty coverage and duration depend on the product and sale terms. A used mower priced above $3,000 should be compared carefully against current new quotes, especially if replacement parts are needed or the seller cannot demonstrate it operating.
Before buying used, inspect the underside for cracks, welded repairs, and severe corrosion. Check for vibration, unusual spindle noise, damaged belt covers, missing guards, and a PTO shaft that is too short, too long, or missing. Verify the model number so the buyer can identify compatible blades and service parts.
Repair can be cheaper than replacement when the deck is sound and the problem is limited to consumables. A blade or belt repair may cost under $200, while multiple spindle or deck repairs can reach $500-$1,200. Compare repair estimates with the price of a sound used mower or discounted new unit before authorizing extensive work.
Why Kubota Mower Quotes Differ Across U.S. Regions
Dealer inventory, freight distance, local labor rates, and competition affect quotes. A buyer in a dense dealer market may receive a lower equipment price or included setup, while a rural buyer may face added delivery charges or limited model availability. For planning, a quote may be about 5%-15% above or below another region’s offer, though actual differences can be smaller or larger.
State and local sales tax can add roughly 0%-10% to the taxable purchase price. On a $3,500 mower, that is about $0-$350. Tax treatment varies by location and transaction, so the final out-the-door estimate should state whether tax is included.
Regional demand also matters. Dealers may be busier before peak mowing periods, and popular widths can sell out. A less common model or a unit shipped from another branch may carry extra freight or a longer wait. Request a written quote that identifies the model, included equipment, delivery, tax, and expected availability.
Price comparisons should use the same model and configuration. A quote that includes a driveline and delivery cannot be compared directly with an equipment-only listing. For an accurate regional comparison, request an out-the-door total for the same mower and included accessories.
Three Kubota Finishing Mower Quotes With Different Scopes
A smaller-deck example could be a new 54- to 60-inch mower quoted at $2,650, plus $150 setup and $200 delivery. The pre-tax total would be $3,000, or about $3,180 with 6% sales tax. This example assumes the tractor is compatible and the mower includes its required driveline.
A typical midrange example could be a 60- to 72-inch new mower at $3,600, with $200 for setup and $300 delivery. The pre-tax total would be $4,100, or about $4,346 at 6% tax. A $120 replacement blade set would raise the total if the buyer wants spares at purchase.
A used-equipment example could be a 72-inch mower listed at $1,900, with $250 in parts and $225 in shop labor for service and inspection. If delivery adds $250, the pre-tax total becomes $2,625, or about $2,783 at 6% tax. The price assumes the deck is structurally sound and does not need major spindle or housing repairs.
These examples are estimates, not official Kubota offers. Labor assumptions are 1-2 hours for basic setup and inspection, with shop rates near $75-$140 per hour. Ask dealers to show base equipment, setup, freight, parts, and tax separately so the total can be checked.
How to Lower the Price Without Buying the Wrong Deck
Start by choosing the narrowest deck that covers the mowing area efficiently and is approved for the tractor. Moving up in width can raise the purchase price and may require a different tractor setup; choosing a deck too small can add hours of mowing. Measure gates and storage space before settling on a size.
Ask local dealers for quotes on the exact model and request the out-the-door total. Comparing two or three offers can reveal whether freight, setup, or accessories account for the difference. If a dealer has a demonstrator, prior-year, or in-stock unit, ask whether it is discounted and whether warranty terms differ.
Save delivery expense only when safe transport is available. The trailer must have sufficient capacity and room, and the mower must be secured properly. Avoid buying an incomplete used mower simply because the sticker price is low: a missing shaft, guards, or model-specific parts can erase the apparent savings.
Choose service based on actual condition. A mower with sharp blades and sound belts does not automatically need a full tune-up at purchase, while a used deck with vibration should be inspected before use. Control the total by confirming fit, comparing complete quotes, and paying for only the setup or repairs the mower actually needs.