A La Cornue Château 165 typically costs about $75,000-$115,000 for the range itself, with a common configured price near $90,000; delivery, installation, and kitchen changes can push the project total higher. The final quote depends on the finish, cooktop configuration, fuel and electrical requirements, U.S. location, and whether the existing kitchen is ready for a 65-inch range.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Château 165 range | $75,000 | $90,000 | $115,000 | Price varies by finish and cooking configuration |
| Delivery and placement | $500 | $1,200 | $2,500 | Access, distance, and handling affect the charge |
| Installation and connections | $1,000 | $2,500 | $6,000 | Assumes typical residential work; upgrades cost extra |
| Likely installed project total | $77,000 | $94,000 | $123,500 | Excludes major cabinetry or ventilation work |
What a La Cornue Château 165 quote usually includes
The Château 165 is a 165-centimeter, roughly 65-inch, custom-configured range. A realistic U.S. appliance budget is $75,000-$115,000 before installation. A straightforward order with a standard finish and a conventional burner-and-oven layout may land near $85,000-$95,000, while highly customized finishes or cooking arrangements can approach or exceed the upper end.
For a typical purchase, budget about $90,000 for the appliance and $2,000-$5,000 for delivery and routine installation. Those figures are planning ranges, not a fixed national price list: dealers may quote different configurations, lead times, freight terms, and included services. Sales tax is generally additional and varies by state and local jurisdiction.
The estimate assumes a new residential kitchen, a dealer-supplied range, normal access to the home, and existing utility connections in suitable locations. It does not assume new cabinetry, a structural alteration, a long gas-line extension, or replacement of a ventilation hood. Buyers should compare written quotes that identify the exact finish, fuel, top configuration, oven arrangement, delivery, and installation scope.
Assumptions: U.S. dealer pricing, standard access, no major kitchen remodeling, and a configured Château 165 rather than a smaller La Cornue model.
How finish, cooktop, and labor appear in the quote
A Château 165 quote combines a high-value appliance with configuration choices and site work. The dealer may price the range as a configured unit rather than list every component separately. Installation costs are particularly dependent on what the kitchen needs before the range can be safely connected.
| Quote component | Typical range | Pricing basis | What can change it |
|---|---|---|---|
| Range and selected configuration | $75,000-$115,000 | Per range | Finish, cooktop, oven, and options |
| Delivery and in-home placement | $500-$2,500 | Per delivery | Distance, stairs, tight turns, or lift equipment |
| Appliance hookup labor | $500-$1,800 | Per installation | Fuel type, connection position, and testing needs |
| Gas or electrical modifications | $500-$3,500 | Per project | New circuit, shutoff, line capacity, or rerouting |
| Ventilation changes | $1,000-$6,000 | Per project | Hood size, duct length, makeup air, and finish work |
| Cabinet or countertop alterations | $500-$5,000 | Per project | Opening width, counter material, and adjacent cabinetry |
Labor pricing is commonly quoted as a project charge, not a simple hourly bill. For budgeting, licensed appliance, gas, and electrical trades may charge roughly $75-$150 per hour, with higher rates in expensive metro areas or for specialized scheduling. A basic hookup can take a few hours, while coordinated utility and ventilation work may require separate visits and multiple trades.
Ask the dealer to separate appliance price, freight, placement, hookup, and kitchen modifications. This makes it easier to distinguish a low appliance quote from a genuinely lower installed total and to spot exclusions such as haul-away or after-delivery inspection.
Which 165-centimeter specifications change the final price?
The range’s 165-centimeter width is a major cost driver beyond the appliance itself. It needs a suitable opening, adequate clearance, and a route into the home that can accommodate a large, heavy unit. A kitchen built around a standard 30- or 36-inch range may need cabinet or countertop work before installation.
Configuration can also move the appliance quote by thousands of dollars. A buyer choosing a particular burner layout, specialty cooking surface, oven arrangement, or nonstandard finish should request the exact configuration in writing. Finish availability and ordering requirements can affect both price and delivery timing; the dealer should confirm whether the quoted finish is standard, premium, or made to order.
Fuel and utility capacity matter. A gas model may require an appropriately sized supply and accessible shutoff, while electric components may require a suitable circuit. If the existing gas line, electrical service, or connections are not adequate, work can add roughly $500-$3,500, before any broader remodeling. Ventilation requirements depend on the hood, duct route, local code, and the cooking equipment selected.
Measure the full delivery path and the finished opening before ordering. Confirm doorway and hallway widths, turns, stairs, elevator dimensions, floor protection, cabinet opening, counter height, and required clearances with the dealer and installer. A delivery obstacle or a 2-4 inch cabinet adjustment can turn a planned hookup into a larger project.
Is dealer installation cheaper than separate trades?
Dealer-arranged installation can simplify scheduling and clarify responsibility for delivery, placement, and appliance setup. A typical basic installation and connection may cost about $1,000-$2,500 when the site is prepared. That package may not include a new gas line, electrical circuit, ductwork, cabinetry, or repairs needed to bring the kitchen up to code.
Hiring separate licensed trades can be less expensive when the connections are already accessible and the homeowner can coordinate visits. A plumber or gas fitter may charge around $75-$150 per hour, and an electrician commonly falls in a similar broad range, though minimum service charges and local rates vary. Hood or cabinet contractors may quote by the project rather than by the hour.
For a coordinated installation involving range placement, a gas adjustment, electrical work, and ventilation, labor may take 8-20 hours across trades, often on different days. At blended rates of $90-$140 per hour, labor alone could represent roughly $720-$2,800, before materials, permits, dispatch charges, or specialty equipment.
Compare the written scope, not just the installation line total. Check whether the quote includes appliance leveling, connection parts, leak or function testing, protective floor covering, removal of packaging, and a return visit if another trade must finish the setup.
How do freight, access, and kitchen prep add to the bill?
Delivery for a premium range may run $500-$1,200 for a straightforward shipment and placement, with difficult access raising the charge to $2,500 or more. Charges can increase when a crew must carry the appliance upstairs, navigate narrow turns, use a lift, or make a second delivery attempt. Confirm whether the price covers curbside delivery, threshold delivery, or placement in the kitchen.
Old-appliance removal is not always bundled. Haul-away may add about $100-$400, depending on local service availability and whether the old range can be removed with the same crew. Packaging disposal and floor or doorway protection may also be excluded. A missed delivery window or a kitchen that is not ready can create rescheduling charges.
Preparing the room can be a bigger expense than the delivery itself. Minor cabinet trimming or counter adjustment may cost $500-$2,000; replacing surrounding cabinets, modifying stone counters, or moving utilities can bring preparation to $3,000-$10,000 or more. The actual range depends on the existing layout and material. Stone countertop work may require a fabricator and can be difficult to revise cleanly after installation.
Have the installer inspect the access route and opening before the range ships. A site check can identify whether doors need removal, whether an appliance dolly is sufficient, and whether the floor or cabinetry needs protection. Resolve those details before the delivery date to reduce repeat-trip and damage risks.
How do U.S. location and local codes affect the price?
Prices for a Château 165 can vary by dealer, freight route, labor market, and local tax. For planning, a major coastal metro or high-cost city may produce an installed quote about 10%-25% above a lower-cost interior market, particularly when specialized delivery and licensed trades are limited. Rural locations may have lower hourly labor but higher travel or freight charges.
Sales tax can add a substantial amount because it is generally calculated on the taxable purchase and may also apply to delivery or installation under local rules. For example, a $90,000 range at a combined 7%-10% tax rate would add $6,300-$9,000 if the full appliance price is taxable. The actual taxable amount and rate depend on the transaction and jurisdiction.
Local code can require changes to gas shutoffs, electrical connections, ventilation, or makeup air. Permit costs for related work may be roughly $50-$500 for common residential permits, while complex projects can cost more. Requirements differ by city and by the scope of work; the installer should identify whether permits and inspections are included or billed separately.
Request a delivered-and-installed quote using the exact service address. A national appliance price alone will not capture local tax, freight, access, permit, or labor charges. Buyers should ask each dealer to state which items are estimates and which are confirmed.
Three Château 165 budgets for different kitchen conditions
The following examples illustrate how the same model can produce very different project totals. They assume U.S. pricing and are not dealer offers. Appliance configuration and local charges can shift each total.
| Scenario | Range | Labor and related work | Estimated total before tax |
|---|---|---|---|
| Ready kitchen, standard finish, easy access | $82,000-$92,000 | $1,000-$2,000 | $83,000-$94,000 |
| Premium finish, utility adjustments, urban delivery | $92,000-$108,000 | $3,000-$6,000 | $95,000-$114,000 |
| Custom layout, cabinet and hood changes | $100,000-$115,000 | $7,000-$15,000 | $107,000-$130,000 |
In the ready-kitchen example, a 65-inch opening and existing connections keep work close to delivery, placement, and hookup. The second example allows for roughly 8-16 hours of combined trade labor, a connection adjustment, and more involved delivery. In the third, cabinetry, countertop, and ventilation work—not just the range—drive the higher total.
Use the installed project total when comparing quotes. One dealer may include delivery and hookup in a package while another lists only the appliance. Normalize quotes by adding freight, labor, tax, removal, permits, and any kitchen work that the range requires.
Can a smaller La Cornue range lower the budget?
A smaller La Cornue model may reduce the appliance price and make installation easier, but the savings depend on the selected line and configuration. A 36-inch or 43-inch range is not a direct substitute for the Château 165’s 65-inch cooking width and layout. It can, however, avoid cabinet expansion, reduce delivery complications, and limit the need for a large custom hood.
Keeping an existing range is another way to avoid a major purchase, especially if the immediate issue is a repairable component. A diagnostic visit may cost about $100-$250, with many standard appliance repairs landing around $250-$1,000; parts, age, and service availability change that estimate. These figures are not specific to La Cornue parts, which may cost more or take longer to source.
At the other end of the market, premium ranges from other manufacturers can cost substantially less, often roughly $10,000-$40,000 depending on size and features. They may not offer the same design, finish, or configuration choices, so a lower price is not a like-for-like comparison. Buyers should compare usable burner and oven capacity, service support, warranty terms, and required kitchen changes.
Choose the 165-inch format only if the cooking capacity and design justify its footprint. If a smaller model serves the cooking needs, the potential savings include both the purchase price and avoiding adjacent cabinetry or ventilation changes.
How to trim the Château 165 project without cutting essentials
Keep the order specification deliberate. Ask the dealer to price the preferred configuration alongside one simpler finish or cooking arrangement, then compare the actual difference. Avoid paying for a custom option unless it matters to the kitchen’s use or appearance. Confirm that any change does not affect availability, service, or warranty coverage.
Get at least three itemized quotes from authorized or qualified sellers and installers. Provide the same configuration, delivery address, access details, and installation scope to each. A low headline price may exclude freight, installation, or tax; a more complete quote can be cheaper overall even if its appliance line is higher.
Complete measurements and utility checks before ordering. Verify the 165-centimeter width, opening, clearances, floor support, path into the home, gas capacity, electrical requirements, and hood plan. If cabinets or counters need work, coordinate that work before delivery rather than paying for storage or a second trip. Bundle removal or other appliance work only when the combined quote is clearly lower.
Do not economize by skipping required gas, electrical, ventilation, or permit work. The safer savings come from controlling finish and scope, preventing delivery problems, and avoiding upgrades that are not required by the selected configuration or local code.