LG Hausys Viatera, now marketed as LX Hausys Viatera, typically costs $60-$120 per square foot installed in the United States. A common 40-square-foot kitchen project runs about $2,400-$4,800, with slab selection, edge work, cutouts, removal, and local labor driving the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed Viatera countertop | $60/sq ft | $90/sq ft | $120/sq ft | Fabrication and standard installation |
| 40-sq-ft kitchen project | $2,400 | $3,600 | $4,800 | Before unusual demolition or structural work |
| Material only | $35/sq ft | $55/sq ft | $80/sq ft | Varies by color, seller, and availability |
| Bathroom vanity top | $600 | $1,100 | $1,800 | About 8-15 sq ft, including basic fabrication |
Installed Viatera countertop prices by kitchen size
For most standard kitchens, budgeting $2,400-$4,800 for 40 square feet is a practical starting point. This estimate assumes an ordinary layout, standard thickness, one sink cutout, common edge treatment, fabrication, and installation. A small straight-run counter can cost less, while a large kitchen with an island, multiple seams, or upgraded details can exceed the range.
Installed pricing generally falls near $60-$120 per square foot. Lower quotes tend to involve simpler colors, straightforward access, and limited fabrication. Higher quotes may reflect a premium pattern, more complex layout, specialty edge work, or expensive metropolitan labor. Request an itemized quote because one contractor may include removal and sink cutouts while another lists them separately.
| Countertop area | Low installed total | Typical total | High installed total |
|---|---|---|---|
| 20 sq ft, small kitchenette | $1,200 | $1,800 | $2,400 |
| 40 sq ft, average kitchen | $2,400 | $3,600 | $4,800 |
| 60 sq ft, kitchen with island | $3,600 | $5,400 | $7,200 |
Assumptions: U.S. midrange labor, standard fabrication, ordinary access, and no major cabinet changes. Measurements, local inventory, and the selected slab can move actual quotes outside these planning figures.
What fabrication and installation add to a Viatera quote
The slab is only one part of the installed price; fabrication, cutouts, and installation can account for a substantial share. Countertop shops may quote a single installed rate or separate material and trade charges. Comparing the scope line by line helps explain why two bids for the same square footage differ.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| Viatera material | $35-$80/sq ft | Color, slab availability, thickness, and supplier |
| Fabrication and install labor | $20-$45/sq ft | Layout, seams, handling, and local rates |
| Sink or cooktop cutout | $150-$350 each | Cutout type, edge finish, and reinforcement needs |
| Edge profile upgrade | $10-$35/linear ft | Profile complexity and total exposed edge |
| Old counter removal | $5-$15/sq ft | Material weight, disposal, and access |
| Delivery or difficult carry | $100-$500 per job | Distance, stairs, parking, and slab handling |
A basic eased edge and standard sink cutout are often included in advertised installed pricing, but that is not universal. Ask whether the estimate covers templating, delivery, seams, faucet holes, sink mounting, disposal, and sales tax. When labor is billed separately, fabrication and installation crews may charge roughly $50-$100 per worker-hour, though many shops price by square foot or project.
Removal is not always necessary. If an existing countertop can be safely removed by the homeowner or another contractor, confirm that the fabricator will still accept the prepared cabinets and whether doing so affects measurement or warranty responsibility.
How slab size, color, and layout change the price
Square footage matters, but slab yield and layout can be just as important as the measured counter area. A 45-square-foot kitchen does not necessarily use exactly 45 square feet of purchased material: fabricators must plan cuts around slab dimensions, pattern direction, seams, and defects. A layout that requires an additional slab can raise the material bill sharply.
Many Viatera slabs are roughly 120-130 inches long and 55-65 inches wide, although dimensions vary by product and stock. If a countertop run exceeds the usable slab length, or if an island must display a continuous pattern, the shop may need extra material. Confirm the actual slab dimensions and ask the fabricator to show the proposed cut plan before approving a final quote.
Color pricing depends on the specific collection and supplier inventory rather than a universal fixed surcharge. A stocked, widely available color may fit within the lower or middle material range; a less common design or special-order slab may approach $80-$100 per square foot for material in some markets. Veined or directional patterns can also create more waste when matching adjacent pieces.
Thickness and exposed edges influence fabrication. Standard countertop thickness is commonly about 3 cm, while a thinner look, laminated edge, or thick mitered island edge may add labor and material. Complex edges can add $10-$35 per linear foot, and waterfall panels are usually quoted by panel area plus custom fabrication rather than as ordinary countertop square footage.
Cutouts and support requirements are additional scope details. A typical sink opening may add $150-$350, while cooktop openings, multiple faucet holes, or a fragile narrow section may require special handling. Overhangs around 10-12 inches often need support planning; longer projections may require brackets or other reinforcement specified by the installer.
When removal, seams, or cabinet repairs raise the bill
Site preparation can turn a straightforward countertop replacement into a larger renovation expense. Standard removal and disposal may add about $200-$700 for a typical kitchen, depending on counter material, access, and local disposal charges. Heavy stone, tile installed over a thick substrate, or a long carry through stairs can cost more.
Cabinets must be level, secure, and able to support the new surface. Minor leveling or shimming may be included, but cabinet repair, replacement, or structural reinforcement is commonly priced separately. If the cabinetry is damaged or out of level by more than about 1/8 inch across a run, the installer may require correction before templating or installation.
Seams are another potential cost and appearance issue. A fabricator might charge roughly $100-$300 per seam, or include ordinary seams in its installed rate. Seam placement depends on slab size, layout, and pattern. An island or long run that crosses a slab limit may need a seam even when the customer prefers a continuous surface.
Plumbing and appliance work are often outside the countertop quote. A plumber may charge around $150-$400 to disconnect and reconnect a sink, faucet, or disposal, while moving plumbing or changing a cooktop circuit costs more. Ask whether the installer coordinates these trades, and whether the sink itself, faucet, and mounting hardware are included.
How Midwest, coastal, and urban labor rates compare
Local labor and delivery can shift an installed Viatera quote by roughly 10%-25% from a typical national planning estimate. In lower-cost rural and smaller-city markets, straightforward projects may land near $55-$90 per square foot installed. Large coastal metros and high-cost urban areas may run about $80-$140 per square foot, especially when labor, parking, and delivery are expensive.
These are planning ranges rather than fixed regional price lists. A rural address can cost more if the fabricator must travel a long distance or there are few nearby suppliers. A major city may have competitive bids despite higher wages, particularly where several shops stock the same product line.
Climate does not usually change the material price directly, but it can affect scheduling and site access. Busy remodeling periods, severe weather, or limited installer availability may delay a project or lead to rush charges. Delivery distance and the number of trips for templating and installation are often more relevant than the state’s climate zone.
For useful comparisons, request at least three local bids based on the same measured area, selected color, edge, cutouts, removal scope, and sink details. A quote that is 15% lower may exclude disposal, plumbing, tax, or support work. Compare the written scope instead of choosing on the headline price alone.
How long templating and installation take
Most projects involve several workdays of scheduling, although the crew may spend only a portion of one day inside the home. After cabinet preparation, templating often takes one to two hours. Fabrication commonly takes about one to three weeks after template approval, depending on slab stock, shop workload, and the complexity of the cut plan.
Installation usually takes three to eight hours for a typical kitchen with a two- or three-person crew. Large islands, stair carries, multiple seams, or difficult access can extend the job or require additional workers. The crew rate is often built into the installed price; when separately itemized, an approximate labor allowance is $50-$100 per worker-hour.
Scheduling can affect cost when the project needs a short turnaround. A rush order may add $200-$800 or more if the fabricator must rearrange production, expedite a special-order slab, or make extra delivery arrangements. Confirm the lead time and whether the quoted price is tied to a particular slab or an expiration date.
Do not schedule plumbing reconnection or appliance installation until the fabricator confirms the countertop is secure and ready. Coordinating trades can avoid a second service call, which may otherwise cost $75-$150 or more in addition to the plumber’s work.
Viatera quartz compared with granite and lower-priced quartz
Viatera generally competes in the midrange-to-premium quartz market, so the closest comparison is another branded engineered-quartz product with similar thickness and fabrication. Installed prices for competing quartz commonly fall around $55-$130 per square foot, depending on brand, design, labor, and scope. A comparable quote should include the same square footage, cutouts, edge, and removal.
Granite often costs about $50-$120 per square foot installed. The final price depends heavily on the slab and pattern, and some granite requires periodic sealing. Quartz is engineered and typically does not need routine sealing, but it can still be damaged by excessive heat and should be cared for according to the manufacturer’s instructions.
Laminate may cost roughly $20-$60 per square foot installed, making it a lower-cost alternative for a tight budget, but it does not provide the same stone-like surface or fabrication options. Solid-surface counters can fall near $45-$100 per square foot installed. Material performance, appearance, repairability, and expected service life matter alongside the initial quote.
Repairing an existing countertop can be less expensive when the issue is limited to a small chip, loose seam, or failed caulk joint. Minor professional repairs may cost $150-$500, while extensive cracks, repeated seam failure, or broad damage may make replacement more practical. Ask a repair provider to assess the underlying cause before paying for a cosmetic patch.
Three Viatera quotes for common countertop projects
These examples show how area and added work create different totals even at similar per-square-foot rates. They assume ordinary U.S. access and midrange labor, not a binding estimate. Actual bids depend on the specific Viatera color and local fabricator.
| Project and scope | Area and rate | Added work | Estimated total |
|---|---|---|---|
| Small straight kitchen, standard edge | 28 sq ft at $75-$95/sq ft | One sink cutout, basic delivery | $2,250-$3,050 |
| Typical kitchen replacement | 40 sq ft at $80-$105/sq ft | Sink cutout, removal, disposal | $3,500-$4,900 |
| Kitchen with large island | 60 sq ft at $90-$120/sq ft | Cooktop cutout, premium edge, added handling | $5,800-$8,000 |
The first example assumes a compact layout with little waste. The middle example includes moderate demolition and standard fabrication. The island example reflects more demanding slab planning and custom details, not a guaranteed premium surcharge for every Viatera color.
For an apples-to-apples comparison, ask each shop to state the measured square footage, number of slabs planned, per-square-foot rate, and separate charges for cutouts, edges, removal, and delivery. If a bid is substantially above the example range, ask which specification or site condition explains the difference.
Ways to lower a Viatera countertop estimate
The most reliable savings come from controlling the layout and scope, not sacrificing necessary installation work. Choose an in-stock color with suitable slab dimensions, use a standard eased edge, and avoid adding decorative profiles to hidden or low-visibility edges. These decisions can reduce waste and fabrication time without changing the countertop’s basic function.
Keep the sink and cooktop in their current locations when practical. Moving plumbing or electrical connections adds trade labor and may require permits or cabinet changes. A simple replacement using existing cutout positions is usually less expensive than redesigning the kitchen around the new surface.
Ask the fabricator whether a remnant can cover a small bathroom vanity or laundry counter. Remnants may be priced below a full slab, but fabrication, cutouts, and installation still apply. Matching the color exactly to an older countertop may be difficult, and remnant availability changes frequently.
Compare quotes with identical specifications, then ask whether templating, standard cutouts, delivery, removal, and disposal are included. Bundling a kitchen and bathroom project with one shop can sometimes reduce delivery or setup charges, but the discount should appear in writing. Avoid paying for a rush schedule unless the time saved justifies its fee.
Before approving a lower bid, verify that it includes proper support, accurate templating, finished edges, and installation by an experienced countertop crew. A small price reduction is not useful if it excludes necessary work or leaves responsibility for damage unclear. Ask the seller to identify the exact Viatera color, thickness, and slab allocation on the quote.