A Lopi Cape Cod wood stove typically costs about $4,500-$6,500 for the appliance when available, while a professionally installed project often totals $7,000-$12,000. The final price depends on whether the stove is new or used, chimney and hearth requirements, local labor rates, and any needed venting or code upgrades.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stove only | $4,500 | $5,500 | $6,500 | New-stock estimate; availability varies |
| Stove plus standard installation | $7,000 | $9,000 | $12,000 | Assumes a suitable nearby chimney |
| Chimney liner | $1,200 | $2,000 | $3,500 | Common stainless-steel liner range |
| Hearth protection | $300 | $900 | $2,000 | Depends on size and finish |
| Used stove | $1,500 | $3,000 | $4,500 | Condition, accessories, and verification matter |
Assumptions: U.S. pricing in USD; typical dealer or contractor work; actual quotes vary by region, availability, and site conditions.
What a Lopi Cape Cod stove and installed project cost
The Cape Cod is a large, premium wood stove with a catalytic combustion system. A new unit, if a dealer can source one, may fall around $4,500-$6,500 before tax, delivery, chimney work, or installation. Because model availability changes, a local dealer may quote a comparable current Lopi model instead, or provide a price for remaining inventory.
A routine installation generally brings the project to $7,000-$9,500 when the home already has a usable, correctly sized chimney and needs only standard connection and hearth work. A project involving a new insulated chimney, roof penetration, masonry repairs, or substantial floor protection can reach $10,000-$12,000 or more.
For budgeting, separate the stove purchase from the full installed price; the chimney and site work can add several thousand dollars. A quoted appliance price may exclude sales tax, delivery, connector pipe, hearth materials, permits, and the first inspection.
The final total also depends on whether the selected unit is new, display stock, or used. A used Cape Cod advertised for $1,500-$4,500 may appear less expensive, but buyers should account for inspection, moving, replacement parts, and the possibility that a professional installer will not install an unverified secondhand stove.
Which stove, chimney, and labor charges shape the quote
Ask the installer to itemize equipment and work rather than accept a single stove-and-installation figure. The table gives typical planning ranges for a straightforward U.S. project; difficult access, high-cost metro labor, and major chimney work can exceed them.
| Quote item | Typical price | Pricing basis | What can change it | Often included? |
|---|---|---|---|---|
| Cape Cod stove | $4,500-$6,500 | Per appliance | Availability, finish, dealer stock | No |
| Connector pipe | $300-$900 | Per setup | Pipe length, wall thimble, double-wall pipe | Sometimes |
| Installation labor | $800-$2,000 | Per project | Crew size, access, setup complexity | Often |
| Chimney liner or system | $1,200-$5,000 | Per chimney | Height, route, liner type, roof access | No |
| Hearth and floor protection | $300-$2,000 | Per installation | Required dimensions, material, finish | Sometimes |
| Delivery and disposal | $150-$600 | Per job | Distance, stairs, old-stove removal | Often separate |
Installation labor for a simple replacement may take 4-8 hours for a two-person crew. A new chimney route, masonry correction, or difficult roof access can extend the work to one or two days. For example, 8-16 combined crew hours at $75-$125 per worker-hour yields roughly $600-$2,000 in labor before specialty equipment or subcontracting.
The most useful quote comparison is an itemized one that identifies exactly what chimney, connector, hearth, and inspection work is included. Confirm whether the price includes hauling away an existing appliance and whether a return visit or correction is billed separately.
How chimney height, firebox size, and home layout affect price
The chimney is often the largest variable beyond the stove itself. A sound, compatible masonry chimney may need only a liner and connection, commonly $1,200-$3,500. A new insulated stainless-steel chimney extending through a ceiling and roof can cost about $2,500-$5,000, with taller or complicated installations exceeding that range.
Chimney height and route matter. A 15-20-foot run with a mostly vertical path is usually less costly than a 25-foot or longer system with offsets, multiple penetrations, or extensive roof work. Each additional length of chimney pipe, support component, roof flashing, and labor can raise the quote. A contractor should verify draft and appliance clearances rather than estimate from height alone.
The Cape Cod’s large firebox and heating capacity make room placement and clearances important. A stove placed near an existing compliant hearth may require limited floor work; a location needing a larger noncombustible hearth or wall protection can add $500-$2,000. The home’s floor structure, nearby combustible trim, and distance to the chimney can also affect labor and materials.
Local rules may require a permit, inspection, or documented installation by a qualified professional. Budget roughly $50-$500 for permit and inspection charges where applicable, while code corrections are separate. If an existing chimney is undersized, damaged, or not suitable for a wood-burning appliance, lining or rebuilding can materially change the project total.
Get the chimney inspected before settling on an appliance price, especially when the home has an older masonry flue or a long roof route. A low stove quote is not a comparable deal if it assumes a chimney that the installer later finds unusable.
New, used, and comparable Lopi stove prices
New Cape Cod pricing is difficult to compare when a specific dealer has limited stock or the model is no longer readily available. A dealer’s written quote should identify the exact model, condition, included parts, warranty status, and whether the price is for the stove alone. A discontinued or scarce product can have a price that differs from ordinary dealer pricing.
Used units commonly list around $1,500-$4,500, depending on age, condition, location, and included accessories. Before purchase, ask for the model and serial information, operating history, proof of prior installation, and a close inspection for cracked cast iron, damaged firebrick, worn door seals, or catalytic combustor issues. A replacement combustor or other repair can add several hundred dollars or more.
For comparison, a new premium catalytic stove from another established brand may cost roughly $3,500-$6,500 before installation. A smaller or non-catalytic stove may be around $2,000-$4,500, but it is not an equivalent substitute if the home needs the Cape Cod’s size or heating output. Match the appliance to the manufacturer’s sizing guidance and the home’s layout, insulation, and climate.
Compare the complete installed price and verified appliance condition, not just the listing price of a used stove. Some installers may decline to move or connect a stove they have not inspected, and a used purchase may not carry the dealer or manufacturer support available with a new appliance.
How Midwest and coastal installation quotes differ
Labor and subcontractor charges vary across the country. A similar installation may run about 10%-20% above a broad national estimate in high-cost coastal metros, dense urban areas, or places with expensive roof and masonry work. Rural markets can be 5%-15% lower for labor, but longer delivery distances or fewer qualified installers can offset the savings.
In cold-weather regions, demand often rises before and during fall, when homeowners prepare for heating season. Scheduling in spring or summer can make it easier to compare contractors and may reduce rush charges, although stove inventory and material prices still affect the quote. A short-notice installation in October or November may add $200-$800 if expedited scheduling or extra crew time is required.
Regional building practices affect the work as well as the labor rate. Homes with steep roofs, tall chimneys, older masonry, or strict local inspection requirements may need more time and specialty materials. Coastal exposure and weather conditions can influence equipment selection and installation logistics, but the installer should specify the actual reason for any added charge.
Use local itemized quotes rather than applying a national percentage to the stove price alone. Request at least two bids that use the same appliance, chimney route, hearth scope, permit assumptions, and removal requirements.
What delivery, removal, and chimney preparation add
Delivery of a heavy stove commonly costs $150-$400 for a local drop, and more when the crew must carry it through stairs, a long path, or a tight entry. Removing and disposing of an old stove may add $100-$500. Some contractors combine delivery, handling, and removal into one charge, so the estimate should show whether the appliance is carried into position or only left at the curb.
Pre-installation chimney inspection or cleaning may cost $150-$400, depending on access and service scope. Repairs can range from a few hundred dollars for minor cap or flashing work to several thousand dollars for a relining or masonry rebuild. Cleaning alone does not confirm that a chimney is correctly sized or safe for the selected stove.
Other possible charges include a hearth extension, wall heat shield, connector replacement, roof flashing, and a permit. A custom stone or tile hearth can cost $1,000-$2,500 or more, while a simpler listed hearth pad may be $300-$900. Confirm required dimensions and clearances before buying a pad or ordering finish materials.
Have the installer list exclusions for access, chimney repair, old-unit removal, and permits before the work date. Written clarification reduces the chance that an attractive base quote grows through add-on charges once the stove is on site.
Can a Cape Cod repair cost less than replacement
A repair can be the lower-cost option when the stove body is sound and the problem is limited to a replaceable wear part. Door gasket replacement may cost about $100-$300 installed, while firebrick replacement can run $150-$500 depending on parts and labor. A catalytic combustor replacement may cost roughly $300-$800 or more, depending on part availability and whether a technician performs additional work.
Repairs are less appealing if the stove has cracked structural parts, extensive corrosion, damaged castings, or an unavailable component. A technician should inspect the unit and provide a repair quote before the owner buys parts. For a used stove, a purchase price of $2,500 plus $700 in repairs and $1,000 in installation can approach the cost of a better-supported replacement option.
Keep the chimney condition in the comparison. A replacement stove may still require the same liner or code correction, while a repair may avoid some appliance-related expense. Conversely, an existing installation may need upgrades regardless of whether the Cape Cod is repaired or replaced.
Compare repair, replacement, and chimney work as separate line items before deciding. Stove age, parts availability, combustor condition, and the remaining service life of the chimney determine whether a repair truly saves money.
Which quote choices can lower the Cape Cod project price
Keep the appliance location close to a usable chimney when the layout permits. Moving the stove across a room can require a longer connector, additional chimney work, and floor or wall protection. A qualified installer must still verify clearances, draft, and the manufacturer’s installation instructions; a lower-cost layout is not acceptable if it compromises safe operation.
Choose a standard hearth pad or straightforward finish when it satisfies required protection and room dimensions. Custom stonework, decorative surrounds, and premium trim can increase project cost without reducing installation labor. Ask the contractor to distinguish required safety components from optional appearance upgrades.
Request a chimney inspection before ordering the stove, then compare written bids with the same scope. Ask each bidder to price the appliance, connector, liner, labor, permit, delivery, removal, and known repairs separately. This makes it easier to spot an omitted liner or disposal charge that would otherwise surface later.
Plan ahead rather than paying for rushed seasonal work. If the existing chimney is in good condition, schedule delivery and installation in a less busy period and confirm the quoted price’s expiration date. Do not skip an inspection or necessary code work to reduce the initial bill.
The safest savings usually come from avoiding unnecessary custom work and preventing surprise chimney repairs, not from cutting required venting or clearance work. A clear scope and early site check are more useful than choosing the lowest unexplained total.