A Master Spa LSX 800 typically costs about $35,000-$55,000 for the spa itself, with delivery and site work pushing a complete project to roughly $40,000-$70,000. Final pricing depends on dealer discounts, selected options, access, electrical work, and whether the site needs a reinforced pad or crane delivery.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| LSX 800 spa | $35,000 | $45,000 | $55,000 | Unit price varies by dealer, package, and availability |
| Delivery and placement | $500 | $1,500 | $4,000 | Crane or difficult access raises the charge |
| Electrical work | $1,500 | $3,000 | $5,000 | Assumes a dedicated connection and ordinary access |
| Pad and site preparation | $1,000 | $3,500 | $8,000 | Excavation, drainage, and reinforcement affect price |
| Installed project | $40,000 | $53,000 | $70,000 | Excludes major landscaping and financing charges |
Assumptions: U.S. dealer pricing, a standard residential installation, and no unusual structural or utility work.
What an LSX 800 costs before and after installation
The LSX 800 is a large swim spa rather than a conventional backyard hot tub. A reasonable planning range for the spa alone is $35,000-$55,000; a typical buyer may see a quote near $45,000 before site-specific work. Dealer promotions and included accessories can make two quotes appear different even when the base model is similar.
For budgeting, expect about $40,000-$70,000 for a working installation. That total assumes a suitable location, delivery to the property, an adequate foundation, and electrical service completed by a qualified electrician. Extensive excavation, a retaining wall, a long utility run, or a crane can move the project above that range.
Use the delivered and installed total—not just the advertised spa price—to compare dealers. Ask whether the quote includes tax, cover, steps, startup, delivery, electrical connection, and any required site work. Per-unit reference: the spa’s purchase price is approximately $35,000-$55,000 per LSX 800; installation charges are additional.
How the shell, delivery, and electrical work shape the quote
The spa is the largest expense, but the remaining work can add several thousand dollars. The following ranges are planning estimates, not fixed manufacturer charges; local labor rates, site access, and dealer service packages affect the final quote.
| Quote item | Typical price | What changes the charge | Pricing basis |
|---|---|---|---|
| Spa and standard package | $35,000-$55,000 | Dealer, included options, sale timing | Per spa |
| Delivery and placement | $500-$4,000 | Distance, obstacles, crane access | Per delivery |
| Electrical installation | $1,500-$5,000 | Panel capacity, wire length, trenching | Per project; electricians often charge $75-$150 per hour |
| Pad and ground preparation | $1,000-$8,000 | Excavation, slab size, drainage | About $8-$20 per sq. ft. for basic concrete work |
| Cover, steps, and accessories | $500-$2,500 | What the dealer includes and upgrades selected | Per package |
| Permit and inspection | $100-$800 | City rules and electrical permit scope | Per jurisdiction |
Electrical and foundation work are the most commonly overlooked additions. The LSX 800 requires substantial electrical capacity, and the exact connection requirements should be confirmed from the model’s current installation documentation and local code before work starts. Do not assume an existing outdoor outlet or hot-tub circuit is sufficient.
Typical labor allowance: 10-30 electrician hours at roughly $75-$150 per hour, depending on panel work, distance, and trenching. This is a budgeting estimate, not a substitute for a site quote.
Which LSX 800 specifications and site conditions raise the price?
The unit’s large footprint makes access and support more consequential than for a small portable spa. Confirm the exact model dimensions, filled weight, required clearance, and equipment access with the dealer. A pad designed for a smaller hot tub may not provide enough room or load support for this swim spa.
- Electrical distance: A connection within about 25 feet of a suitable panel is often less expensive than a 50-100-foot route requiring larger wire, conduit, or trenching. Panel replacement or a service upgrade can add several thousand dollars.
- Foundation area: A compact, level pad sized to the manufacturer’s specifications costs less than an expanded patio. Each additional 100 square feet of basic concrete at $8-$20 per square foot adds roughly $800-$2,000 before grading or reinforcement.
- Delivery path: A clear, level route may allow ordinary placement. Narrow gates, fences, overhead lines, steps, or a backyard with no equipment access can require a crane, commonly adding $1,000-$4,000.
- Ground and drainage: Stable, level ground can need only modest preparation. Sloped, soft, or poorly drained soil may require excavation, a retaining solution, or upgraded base work, potentially adding $2,000-$10,000 or more.
- Included package: A cover, steps, lighting, or other selected options can alter the dealer’s price by hundreds to a few thousand dollars. Check the written specification rather than relying on the package name.
Measure the delivery route and verify the foundation plan before accepting a final quote. A site visit can reveal obstacles that a phone estimate misses and reduce the chance of last-minute equipment or labor charges.
How much does LSX 800 installation labor take?
When the pad and electrical service are ready, delivery and placement may take a few hours, while final connection and startup can require several more. The full project commonly spans one to three days of on-site work, but scheduling may stretch across weeks if the pad must cure, a permit is pending, or a crane and electrician need separate appointments.
Electrician rates often fall around $75-$150 per hour, with higher charges in expensive metro areas or for emergency scheduling. Site-preparation crews may price the work as a fixed bid rather than hourly labor. Ask for separate labor and material amounts so a low base quote does not conceal a large preparation allowance.
Installation time depends more on site readiness than on spa placement alone. A ready pad, an approved electrical plan, and an unobstructed route help limit repeat visits. Confirm who coordinates the electrician, delivery crew, inspection, and startup, since those tasks may be contracted separately.
Why LSX 800 quotes differ across U.S. regions
Dealer pricing and installation labor vary with local competition, freight distance, construction costs, and seasonal demand. As a broad planning comparison, delivered project quotes in lower-cost markets may run 5%-15% below the national planning average, while high-cost coastal metros can be 10%-25% above it. These are budgeting deltas, not guaranteed regional price lists.
Rural buyers may see lower electrician rates but higher delivery charges if the dealer or crane company is far away. In dense neighborhoods, restricted access and permit requirements can erase any savings from a competitive spa price. Climate also matters indirectly: frost depth, drainage, and winter delivery conditions may require different site work.
Compare at least two local, itemized bids when possible. Ask each dealer to quote the same package and delivery scope, then obtain independent electrical and concrete estimates if those trades are excluded. A lower price that omits a crane, permit, or panel upgrade is not directly comparable.
Three realistic LSX 800 project budgets
These examples illustrate how the same spa can produce different installed totals. They assume no major landscaping or unusual structural work. Actual dealer prices and local bids should replace these estimates before committing to a purchase.
| Scenario | Scope and labor | Estimated total |
|---|---|---|
| Ready suburban site | $40,000 spa package; $800 delivery; 12 electrician hours at $100 per hour; $1,500 pad touch-up and permit | $43,500 |
| Typical backyard project | $45,000 spa package; $1,500 delivery; 20 electrician hours at $115 per hour; $3,000 reinforced pad; $400 permit and accessories | $52,200 |
| Restricted-access installation | $52,000 spa package; $3,500 crane and delivery; 30 electrician hours at $140 per hour; $7,000 excavation and pad; $800 permits | $67,500 |
The access and site-work line items account for much of the spread between these examples. The listed hourly calculations cover electrician labor only; equipment, materials, taxes, and other trades may be billed separately. Verify whether sales tax is included in each dealer’s advertised or written price.
When a used LSX 800 or another spa saves money
A used LSX 800 may cost less upfront, but the discount should be weighed against transport, inspection, and repair risk. Moving a filled or previously installed swim spa is not a simple delivery; the seller should provide model details, operating history, and confirmation that the shell and equipment are sound. A used unit still needs an appropriate pad and electrical connection.
For buyers who mainly want soaking rather than swim training, a smaller hot tub may cost substantially less to buy and install. A lower-priced swim spa model can also reduce the initial bill, but performance, dimensions, jet system, and warranty may differ. Compare the equipment specifications and expected use rather than treating all spa models as equivalent substitutes.
Do not value a used spa by its original retail price alone. Get an inspection or service assessment and price the move, reconnection, and any repairs before deciding. A low purchase price can lose its advantage if the unit needs a pump, heater, control, cover, or electrical upgrade.
How to lower the LSX 800 bill without cutting essentials
Control the project scope before negotiating the spa price. Choose only accessories that are useful, confirm which items are already included, and avoid paying twice for delivery, startup, or a cover. A dealer discount is less meaningful if required installation services are excluded or separately marked up.
- Request itemized quotes from multiple dealers for the same model, options, delivery distance, and service package.
- Have an electrician assess panel capacity and route length before purchase; early planning can avoid rushed upgrades or duplicate visits.
- Prepare a clear, level delivery path and remove movable obstacles, while leaving structural work to qualified contractors.
- Compare a basic compliant concrete pad with premium patio finishes. Decorative paving can often be added separately without changing the support surface.
- Ask whether slower-season ordering changes the price, but compare the written offer’s expiration date, delivery timing, and included services.
- Keep a 10%-15% contingency for site surprises rather than spending the full budget on the spa itself.
Protect the foundation, electrical safety, and required access; trim optional finishes and duplicate services first. Before paying a deposit, obtain written confirmation of the model, accessories, tax treatment, delivery conditions, installation responsibilities, warranty coverage, and cancellation terms.