A Maytag Epic Z washer usually costs about $100-$400 used, while a tested or refurbished unit can reach $300-$700 before delivery. The series is discontinued, so condition, local availability, model number, repair history, and moving costs matter more than a new-retail price.
The estimates below cover the washer itself and common purchase scenarios in the United States; scarce new-old-stock listings may be priced higher but are not typical.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Maytag Epic Z washer | $100 | $250 | $400 | Working, sold as-is, local pickup |
| Tested or refurbished washer | $300 | $500 | $700 | May include limited shop warranty |
| Delivery and basic hookup | $75 | $150 | $250 | Varies by distance, stairs, and retailer |
| Installed used purchase | $175 | $400 | $950 | Washer plus service; disposal can add fees |
What a Maytag Epic Z washer typically costs used
For a functioning unit in ordinary cosmetic condition, budget $100-$400 for the washer, with roughly $250 as a practical midpoint. Lower-priced listings are often private sales, pickup-only, and sold without a warranty. A dealer-tested machine, a clean unit with documented service, or a model bundled with a matching dryer can cost more.
Refurbished listings commonly fall around $300-$700, depending on what the seller inspected or replaced and whether a short warranty is included. Ask what “refurbished” means: it may describe a basic test rather than replacement of wear-prone parts. A rare new-old-stock listing can exceed $700, but the age of stored seals and electronics makes condition and return terms especially important.
Epic Z is a discontinued front-load series, not a currently produced washer with a stable new-product price. Model numbers vary across the series, so buyers should confirm the exact model on the rating label and compare its features, dimensions, and parts availability before paying a premium.
Assumptions: U.S. local-market pricing, standard used condition, no major repair, and buyer pickup unless noted.
How purchase, delivery, and hookup shape the total
The asking price is only one part of the expense. A washer may need a delivery crew, new supply hoses, a drain connection, leveling, or removal of an old appliance. These charges can erase the apparent savings over a newer used model available nearby.
For a basic local purchase, allow another $75-$250 for delivery and hookup, before any repair or old-unit disposal. Confirm whether the seller tests the washer on a full cycle and whether the price includes loading, stairs, and installation.
| Quote item | Typical price | What changes the charge | Budget note |
|---|---|---|---|
| Used washer | $100-$400 per unit | Condition, seller, warranty | Check exact model and cycle operation |
| Local delivery | $50-$150 | Distance, stairs, access | Long-distance or difficult access can exceed range |
| Basic hookup | $25-$100 | Connections and installer scope | May be bundled with delivery |
| New hoses | $15-$50 per set | Hose type and length | Old hoses may be unsafe to reuse |
| Old washer removal | $25-$100 | Haul-away policy and location | Some sellers charge separately |
| Repair allowance | $100-$500 | Fault, parts, and labor | Obtain a diagnosis before committing |
Installation may be less expensive when water valves, drain, and outlet are already accessible and compatible. A new electrical circuit, plumbing correction, or floor repair is not a routine hookup and should be quoted separately.
Which Epic Z model and condition raise the price
Model and condition can shift the price by hundreds of dollars. Epic Z machines are front-load washers with model-specific controls and parts; do not assume every unit has the same capacity, cycle options, or repair requirements. Compare the rating-label model number with the listing and verify dimensions, especially if replacing a washer in a closet or tight laundry alcove.
Proof of a complete wash-and-spin test is worth more than a seller’s description of the machine as “working.” Ask to see it fill, tumble, drain, and spin without unusual noise, leaks, or error codes. A quick power-on test does not confirm that the drain pump, door lock, or high-speed spin works properly.
A clean door gasket, intact dispenser, quiet bearings, and no signs of water beneath the machine support a higher asking price. Rust, a musty odor, damaged controls, or a door that fails to lock should lower the offer. A warranty of 30-90 days may justify paying more than an as-is listing, but only if it clearly states what labor and parts are covered.
Pricing also depends on whether the buyer can obtain parts and service locally. Before purchase, ask a repair shop whether it works on the specific model and whether common components are available. A low purchase price is not a bargain if a diagnosis reveals a costly part or a repair that cannot be completed promptly.
How far can repair costs move the final bill
Used washers often need small corrections, but a major fault can make an inexpensive Epic Z uneconomical. A service visit or diagnosis may cost $75-$150, sometimes credited toward an approved repair. Minor work such as replacing a hose or cleaning a clogged drain path may be relatively inexpensive; labor and parts for a control, pump, or bearing problem can be substantially higher.
Set a repair ceiling before buying: if the purchase, delivery, and repair total approaches $600-$800, compare that amount with a newer used washer carrying a warranty. These figures are decision thresholds, not a guaranteed repair quote. A technician must identify the fault and check part availability before a reliable estimate is possible.
Typical service labor runs around $75-$150 per hour, with a one-hour minimum common for appliance visits. Travel, diagnostic fees, and parts are often additional. Example: 2 hours at $100-$150 per hour means $200-$300 in labor, before parts or a service-call fee.
Do not buy a washer with a known leak or failed spin solely because the seller says the repair is easy. A leak can involve a hose, seal, or tub-related issue, and those repairs vary greatly. Obtain a written estimate using the exact model number when possible.
Epic Z pricing compared with newer used washers
A used Epic Z at $100-$250 can be a low-cost choice when it is tested, nearby, and easy to install. At $400-$700, it competes with some newer used front-load washers that may have more readily available parts or a longer seller warranty. A current new front-load washer commonly costs roughly $600-$1,200 before delivery and installation, depending on capacity and features.
Compare the all-in price and expected service life, not just the sticker price. For example, an Epic Z listed at $225 plus $125 delivery and a $100 hose-and-hookup charge totals $450 before repairs. A tested newer washer at $500 with delivery included may be better value if it comes with a written warranty.
A basic top-load washer is another substitute when purchase price and repair simplicity matter more than front-load features. Used top-load models can be found around $150-$400, while new entry-level units often begin near $500-$800. These are broad market ranges; capacity, retailer, and local inventory can move quotes considerably.
Buyers who already own a compatible dryer may value a matching appearance, but matching does not ensure the washer is mechanically sound. Measure both appliances and check door swing, depth, and stacking requirements before paying extra for a set.
How U.S. location changes delivery and asking prices
Local supply drives much of the regional difference because this discontinued washer is commonly sold through local resale channels. Dense metro areas may have more listings and competition, while rural buyers may face fewer choices and longer delivery distances. As a rough planning allowance, metro asking prices can be 5%-15% above a nearby suburban market when demand is strong; rural delivery and access charges may add 10%-30% compared with a short urban trip.
Compare at least three local listings and separate the washer price from the delivery quote. These percentage differences are planning estimates, not fixed regional tariffs. Season, seller urgency, building access, and the distance to a service technician can matter more than state boundaries.
In apartments, walk-ups, or homes with narrow stairs, ask whether the crew charges for extra flights, a second technician, or removal of a door. A $75 delivery estimate may not apply if the route requires special handling. In remote areas, a repair visit can also cost more because of travel time or a higher minimum charge.
Sales tax depends on the transaction and local rules; private-sale treatment can differ from a retailer’s invoice. Request a written total including tax, delivery, hookup, and haul-away so that two offers can be compared on the same basis.
What delivery crews and appliance technicians charge
Basic delivery often takes 30-90 minutes at the home when the route is clear and connections are ready. A straightforward hookup may add roughly 30-60 minutes. Stairs, long carries, tight doorways, disconnected plumbing, or a stacked installation can extend the visit or require a separate service.
Most buyers should reserve $75-$250 for delivery and basic placement, with more for difficult access or old-appliance removal. Retailers and independent movers set their own minimums, so a low mileage rate does not necessarily mean a low total charge.
Ask whether the crew will connect hot and cold supply lines, secure the drain hose, level the feet, and run a test cycle. Some delivery services place the washer only and leave hookups to the homeowner or a separate installer. If connections require plumbing changes, a plumber may charge roughly $100-$250 or more depending on the work and local rates.
For a labor estimate, a typical appliance technician rate is about $75-$150 per hour, with a diagnostic or trip charge commonly around $75-$150. A 1.5-hour repair at $90-$140 per hour would mean $135-$210 labor, before parts and fees. Get the shop’s minimum charge and parts markup before authorizing work.
How to keep an Epic Z purchase under budget
The biggest savings usually come from buying a verified local machine and avoiding delivery, repair, and feature costs that are not needed. A pickup purchase at $150-$250 can be economical if the buyer has a suitable vehicle, safe lifting help, and a way to test the washer before loading.
Ask the seller to run a complete cycle, show the model and serial labels, and disclose repairs or error codes. Request a short written receipt that records the price, condition, and any promised return period. If testing is not possible, price the unit as an as-is machine and leave room in the budget for diagnosis.
Compare the full quote from at least two sellers or appliance dealers. Include tax, stairs, hoses, hookup, and haul-away, then compare against a newer used alternative. A $50 discount on the washer can disappear if the delivery charge is $100 higher or if the seller offers no warranty.
Skip unnecessary upgrades such as replacement accessories that are already in good condition, but do not reuse cracked or deteriorated water hoses to save a small amount. Avoid paying a premium for a matching dryer unless both appliances are tested and the set price is lower than buying comparable units separately.
Finally, set a maximum all-in budget before shopping. If a used Epic Z costs more than $400 before delivery, or if the expected total exceeds roughly $700 after repairs, compare current alternatives rather than assuming the older model’s original retail reputation makes it a better buy.