A Mirage retractable screen door typically costs about $350-$700 for the door and $500-$1,000 installed for a standard single doorway. Final pricing depends on opening dimensions, single- or double-door configuration, frame color, site preparation, and local labor rates; dealer quotes may differ because the product is often custom measured.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Single-door unit | $300 | $475 | $700 | Screen, frame, and standard hardware; before installation |
| Single door installed | $500 | $750 | $1,000 | Typical opening with straightforward mounting |
| Double-door unit | $650 | $1,050 | $1,600 | Paired screens for French or wide openings |
| Double door installed | $900 | $1,350 | $2,000 | May require more fitting and alignment |
| Replacement mesh or repair | $100 | $225 | $450 | Repair scope and availability vary by model |
What a Mirage Screen Door Costs for One Opening
For a standard single exterior doorway, budget $500-$1,000 for a professionally installed Mirage retractable screen door. A common planning figure is about $750, including a midrange unit and basic installation. The door itself is often $300-$700, or roughly $300-$700 per opening; the installed rate per opening is higher because it includes measuring, fitting, and setup.
Most standard single-door projects land near $600-$850 when the frame fits without carpentry changes. The low end assumes a standard-size opening, routine access, and basic finish choices. Wider, unusually tall, or out-of-square openings can push the quote upward, especially if the installer needs to modify trim or source a custom configuration.
Prices are not a fixed national list price. Mirage products are commonly sold through dealers and installers, so a quote may combine product, measurement, delivery, and labor. Ask whether the quoted amount includes tax, old-screen removal, and warranty service. Assumptions: U.S. dollars, standard single entry opening, ordinary access, and no major frame repairs.
How Frame, Mesh, and Installation Shape the Quote
A useful estimate separates the screen assembly from the work required to fit it. The following ranges are typical planning estimates, not a universal dealer price sheet; local product availability and opening measurements affect each line.
| Quote component | Low | Average | High | What changes the amount |
|---|---|---|---|---|
| Screen and retractable assembly | $300 | $475 | $700 | Opening size, frame finish, and model |
| Labor and fitting | $150 | $275 | $450 | One installer or two, alignment, and access |
| Measurement or service visit | $0 | $50 | $125 | May be credited toward purchase |
| Trim or minor prep | $0 | $75 | $250 | Uneven jambs, trim work, or fastener changes |
| Removal and disposal | $0 | $40 | $100 | Existing screen or storm-door removal |
Installation labor often works out to $75-$150 per hour, but many dealers price a complete installation rather than billing strictly by time. A simple fit may take about 1-2 hours; a paired system or a doorway requiring adjustments can take 2-4 hours. Confirm if the quote includes a return visit for adjustment.
Frame and fitting charges matter as much as mesh when comparing installed quotes. A low product price may not be the lowest final price if measurement, travel, or trim work is billed separately.
Opening Width, Frame Condition, and Mesh Options That Raise Price
Opening size is a primary cost driver. A screen designed for a typical 30-36-inch-wide single door generally costs less than a unit for a wider or taller opening. When a single opening approaches 40 inches or more, or when a doorway is unusually tall, the installer may need a larger or custom configuration; that can add roughly $75-$250 or more, depending on the model and dealer.
French doors and other openings that need two retracting panels usually cost substantially more than one screen. A double configuration may run $650-$1,600 for product alone and $900-$2,000 installed. The exact total depends on the combined width, how the two panels meet, and whether the center closure and tracks need careful alignment.
Mesh type and finish can also change the quote. Standard insect mesh is usually the economical baseline. Specialty mesh intended for improved visibility, durability, or pet resistance may add about $50-$200 per opening when offered for the selected system. A custom frame color or nonstandard finish may add $25-$150, though dealer options differ.
Measure the clear opening and inspect the jamb before comparing model prices. A 1/4-inch-to-1/2-inch variation, a twisted frame, or loose trim can affect fitting. If the installer finds rot, a badly out-of-square jamb, or a need to rebuild the mounting surface, repairs may add $100-$500 or require a separate contractor. These are site-condition charges, not necessarily part of the screen price.
Where Installation Labor and Doorway Prep Add Fees
A straightforward installation commonly takes one technician 1-2 hours after the opening has been measured and the product is on site. A wide double-door setup may use two installers or take longer to align, raising the labor portion to roughly $250-$450. A quote may also include a minimum service charge, especially when the dealer must travel a long distance for a single installation.
Preparation can mean removing an existing screen, moving hardware, cleaning the mounting area, or adjusting trim. Simple removal might cost $40-$100; minor carpentry can run $75-$250. Extensive jamb repair is a separate scope and can exceed $500 if wood replacement or repainting is needed.
Ask whether installation includes final tension and retraction adjustments. Retractable systems need the track and housing positioned correctly so the screen operates smoothly. Get written clarification on whether a service call for an installation adjustment is included and for how long. The labor formula is a helpful comparison only when quotes use similar assumptions:
How Mirage Screen Door Quotes Vary Across U.S. Markets
Labor and travel can shift installed prices even when the product configuration is similar. In lower-cost rural and smaller-market areas, a standard single-door project may fall near $500-$750 installed. In many suburban markets, $600-$900 is a reasonable planning range. Major metro areas and high-cost coastal markets can be 10%-25% above a midrange quote, or roughly $700-$1,150 for a comparable opening.
Those differences reflect local wages, dealer availability, travel, and scheduling—not a guaranteed regional price schedule. A rural customer may face a higher trip fee if the nearest authorized provider is far away. In dense cities, parking, access restrictions, and appointment logistics can add $50-$200. Obtain at least two local quotes using the same measurements and options.
Compare the complete installed total, not a regional average alone. Ask each provider to list product, installation, trip charge, removal, and any trim work separately. A quote 15% higher may be justified by a more involved opening or a longer service distance, but the line items should make the difference understandable.
Three Example Budgets for Single and Double Doors
A standard-size single door with ordinary trim provides a useful baseline. The following examples illustrate how scope changes totals; actual dealer pricing can fall outside them.
| Project | Product and rate | Labor and extras | Estimated total | Assumptions |
|---|---|---|---|---|
| Basic single entry | $375 unit; about $375 per opening | $175 labor, $0-$50 prep | $550-$600 | Standard mesh, easy access, sound jamb |
| Custom single entry | $600 unit; about $600 per opening | $300 labor, $100 trim adjustment | $1,000 | Nonstandard size or finish and minor fitting |
| French-door pair | $1,100 system; about $550 per panel | $350 labor, $100 removal or setup | $1,550 | Two panels, alignment, and routine access |
For a basic example, a $375 unit plus $175 installation totals $550 before tax. The custom single-door estimate reaches $1,000 because it includes a higher-priced unit and trim adjustment. The paired-door example costs more overall but its product rate is shown per panel to make the wider opening easier to compare.
Use examples as quote-checking tools, not guaranteed dealer offers. Ask whether the estimate includes sales tax, measurement, and delivery. If taxes are excluded, the final amount will depend on the local rate, and some providers may combine small charges into a single installation fee.
Repair, Replacement Mesh, or a New Retractable Door
If a Mirage screen is damaged but its frame and mechanism remain in good condition, repair may cost less than replacing the full assembly. A basic adjustment or minor service visit may be $75-$175. Replacing mesh or repairing a screen component may run $100-$450, depending on parts, labor, and whether the model is still supported.
Replacement becomes more practical when the housing, track, or retraction mechanism is damaged, or when the existing product cannot be repaired with available parts. A new standard single door installed for $500-$1,000 costs more upfront, but may avoid repeated service charges. Ask the dealer to identify the failed component and price both repair and replacement before authorizing work.
Warranty coverage varies by product, purchase date, and installer. It may apply to certain components or workmanship but not damage, normal wear, or labor in every case. Check the written terms and whether a service visit is chargeable. A modest diagnostic fee of $50-$125 may apply if the repair is not covered.
Choose repair when the frame and operating parts are sound and the repair quote is clearly below replacement. When repair approaches half the cost of a new installed unit, compare both options, including warranty and the likelihood of another service call.
Ways to Lower the Installed Price Without Sacrificing Fit
Keep the project to one standard opening when possible, and avoid ordering upgrades that do not address a real need. Confirm the opening dimensions and ask which mesh and finish are included in the base quote. If a specialty mesh or custom color adds a premium, request its exact price so the value can be compared against the standard option.
Prepare the doorway by moving furniture and clearing access, but do not alter the jamb before the installer confirms measurements. Improper trim changes can create fitting problems and additional charges. If an old screen must be removed, ask whether doing so in advance is allowed and whether it affects installation or warranty; removal savings may be small, typically $40-$100.
Compare two or three written estimates with identical configuration, width, finish, and service scope. Ask about a measurement fee, travel charge, tax, and adjustment visit. Scheduling during a less busy period may improve appointment availability, though it does not guarantee a lower product price.
The most reliable savings come from controlling scope and avoiding duplicated fees. Bundling two doors may reduce a second trip or setup charge, but it is not always cheaper if both openings require custom work. Request a combined quote alongside separate line-item prices to see whether a real discount is applied.