Mohawk SolidTech Plus flooring typically costs about $3-$5.50 per square foot for planks, or roughly $6-$11 per square foot installed. Room size, local labor rates, subfloor repairs, trim, and removal of old flooring drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Flooring material | $3/sq ft | $4.25/sq ft | $5.50/sq ft | Before sales tax; varies by color and seller |
| Installed flooring | $6/sq ft | $8.50/sq ft | $11/sq ft | Standard prep and installation |
| 300-sq-ft room | $1,800 | $2,550 | $3,300 | Installed, before major repairs |
| 1,000-sq-ft project | $6,000 | $8,500 | $11,000 | Installed, standard access |
What Mohawk SolidTech Plus costs for typical rooms
For a 300-square-foot bedroom or living room, a typical installed budget is $1,800-$3,300, with about $2,550 as a middle estimate. A 1,000-square-foot project commonly falls around $6,000-$11,000. These totals assume a standard product selection, a sound and reasonably level subfloor, basic installation, and no extensive demolition.
Material orders generally need 5%-10% extra for cuts and waste, so a 300-square-foot room may require 315-330 square feet of planks. The actual waste allowance depends on room shape, plank layout, and installer practice. Assumptions: U.S. mid-market pricing, standard room access, routine installation, and no major subfloor work.
Budget about $8.50 per square foot installed for a straightforward project, then add for prep, trim, and removal.
How plank, labor, and prep charges build the quote
Installation bids may bundle supplies and labor or list them separately. Comparing line items helps show whether the quoted amount includes floor removal, underlayment, transitions, and furniture handling. The ranges below are typical planning figures, not fixed national rates.
| Quote item | Typical price | What changes it | Common unit |
|---|---|---|---|
| SolidTech Plus planks | $3-$5.50 | Color, seller, and order size | Per sq ft |
| Installation labor | $2.50-$5 | Room layout and installer rates | Per sq ft |
| Floor removal | $1-$3 | Existing material and disposal | Per sq ft |
| Subfloor leveling or patching | $1-$4 | Extent of uneven areas | Per sq ft affected |
| Trim and transitions | $2-$8 | Material and doorway count | Per linear ft or piece |
Labor is often estimated by square footage, but installers may price small or complicated rooms by time or minimum charge. Ask whether the quote includes removal, disposal, floor preparation, transitions, and installation of baseboards.
Room size, subfloor flatness, and plank layout change pricing
Project size affects both material quantity and installation efficiency. A 100-square-foot powder room can have a higher per-square-foot labor rate than a 1,000-square-foot open area because setup, cuts, and minimum charges are spread over less flooring. Irregular rooms, closets, and multiple doorways also increase cutting and transition work.
Subfloor condition is a major variable. If more than a few isolated low spots need filling, or an area of roughly 100 square feet or more requires leveling, prep may add several hundred dollars. Product instructions and installer requirements determine how flat the surface must be; an installer should inspect it rather than assume the new planks will hide dips.
Order quantity matters, too: allow 5%-10% extra, and consider another few percentage points for diagonal layouts or rooms with many angles. Confirm the required expansion gaps and floor-preparation standard for the specific SolidTech Plus product before accepting a low labor bid.
Regional installer rates shift the installed price
Labor and disposal charges vary by market. In lower-cost rural areas, a basic installation may land near the low end of the $6-$11-per-square-foot installed range. Large metro areas and regions with higher wages can run about 10%-25% above a mid-market estimate; remote locations may also incur delivery or travel charges.
As a practical comparison, a 500-square-foot job priced at $8.50 per square foot totals $4,250. A 15% regional increase would put it near $4,890, before unusual prep or removal. Compare quotes from local flooring contractors on the same material quantity and scope, rather than comparing a materials-only price with a full-service bid.
Regional differences are most useful for judging labor and service charges; the product’s listed price can vary separately by retailer and promotion.
Three SolidTech Plus project examples with labor included
| Scenario | Material and scope | Estimated total | Included work |
|---|---|---|---|
| Small bedroom | 180 sq ft at $4.25/sq ft | $1,170-$1,710 | Planks, 7% waste, basic install; limited trim |
| Living room | 350 sq ft at $4.25/sq ft | $2,450-$3,675 | Planks, 7% waste, installation, standard transitions |
| Open main floor | 900 sq ft at $4.25/sq ft | $6,300-$9,450 | Planks, 7% waste, installation on a sound subfloor |
These examples use an installed range of roughly $6-$9 per square foot, reflecting standard labor and minor accessories. They exclude extensive leveling, old-floor removal, stairs, and furniture moving. A quote for the open main floor may be lower per square foot if the layout is simple, or higher if doorways and separate rooms require many cuts.
Use the examples as scope comparisons, not guaranteed bids; labor and material prices differ by location and retailer.
Removal, leveling, and transitions add more than plank price
Removing carpet may be relatively inexpensive when access and disposal are simple, while glued flooring or multiple existing layers can take longer and cost more. Budget around $1-$3 per square foot for straightforward removal and disposal, with difficult adhesive or extra layers potentially exceeding that range. Furniture moving, appliance handling, and stairs may be quoted separately.
Leveling is not automatically required across the entire floor. Contractors may patch localized defects instead, while broad unevenness can call for more labor and materials. Doorway transitions, reducers, and replacement baseboards are smaller line items individually but can add up across a whole-home project.
Have the installer state which rooms need preparation and how any extra work will be priced before work begins.
Where homeowners can trim a SolidTech Plus budget
Keep the flooring scope consistent by measuring the rooms, confirming the exact product and color, and asking for separate material and labor amounts. Compare at least three local bids with the same square footage, waste allowance, removal plan, and trim requirements. A low quote may exclude prep or disposal rather than represent a lower complete price.
Choose a straightforward plank layout, clear rooms before installation if the contractor allows it, and avoid replacing sound trim or leveling areas that meet product requirements. Ask whether a larger continuous installation changes the labor rate, but do not combine rooms if their timing or floor conditions differ. Check current retailer pricing and any delivery charge before placing an order.
The safest savings usually come from controlling added work and comparing identical written scopes, not cutting necessary subfloor preparation.