Parr Lumber prices vary by store, lumber species, grade, dimensions, and market conditions; the company does not have one dependable price for every location or order. For budgeting, common framing lumber may run about $3-$20 per board, while a small deck or framing package can cost several thousand dollars before delivery and installation.
The ranges below are planning estimates, not a live Parr Lumber quote. Local inventory, current supplier pricing, order size, and delivery access can change the final total.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 2×4 framing lumber, 8 ft | $3 | $5 | $8 | Per piece; species and grade affect price |
| 2×6 framing lumber, 12 ft | $8 | $12 | $18 | Per piece; longer lengths cost more |
| Pressure-treated 2×6, 12 ft | $12 | $19 | $30 | Per piece; treatment and grade vary |
| 3/4-in. plywood, 4×8 sheet | $35 | $55 | $85 | Per sheet; sheathing and finish panels differ |
| Decking material package | $1,500 | $4,000 | $9,000+ | Materials for roughly 200 sq. ft.; excludes labor |
What common Parr Lumber orders may cost
For standard dimensional lumber, a small pickup order of 2x4s, 2x6s, and a few sheets of sheathing may total $150-$500. A room addition or garage framing package can reach $2,000-$8,000, depending on wall area, roof design, engineered components, and waste allowance. A full house package is commonly quoted from project plans rather than priced as a simple shelf order.
Board prices below assume ordinary retail quantities and common construction grades. They are useful for comparing a quote, but not a substitute for checking the price at the specific Parr Lumber yard. Assumptions: standard sizes, typical Pacific Northwest retail availability, no installation, and ordinary pickup access.
Expect a meaningful price spread between commodity framing stock and appearance-grade or treated lumber. For example, an 8-foot 2×4 may be about $3-$8, while a 12-foot pressure-treated 2×6 may be $12-$30.
| Material | Low | Average | High | Price basis |
|---|---|---|---|---|
| 2×4 stud, 8 ft | $3 | $5 | $8 | Each |
| 2×4, 12 ft | $5 | $8 | $12 | Each |
| 2×6, 12 ft | $8 | $12 | $18 | Each |
| 2×10, 16 ft | $25 | $38 | $55 | Each |
| 1/2-in. plywood, 4×8 | $25 | $40 | $60 | Sheet |
| Composite deck boards | $3 | $5 | $8 | Per linear ft |
How lumber, labor, and delivery shape the quote
A material-only order is the clearest part of a lumber estimate, but a project quote may also include cutting, handling, delivery, disposal, and installation by a contractor. Parr Lumber sells building materials; installation availability and terms depend on the product, location, and project arrangement. Confirm whether a quoted total covers materials only or includes labor and related services.
Separate the lumber subtotal from freight and job labor before comparing two quotes. A typical breakdown for a modest framing or deck-material order might look like this:
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Framing lumber and sheet goods | $900 | $1,800 | $3,500 | Small-to-mid-size project package |
| Fasteners and connectors | $75 | $200 | $500 | Nails, screws, brackets, and ties |
| Delivery | $75 | $150 | $350 | Local drop; access and distance matter |
| Cutting or special handling | $0 | $50 | $200 | Varies by order and service |
| Carpenter labor, if hired separately | $600 | $1,500 | $3,000 | Installation scope and local rate matter |
Contractor labor commonly runs about $50-$100 per hour per worker, with skilled carpenters in high-cost markets sometimes above that range. A two-person crew working 10-12 hours at $60-$90 per hour would represent roughly $1,200-$2,160 in labor before overhead or other trades.
Species, grade, and board length change the price
Species and grade can make two boards with identical dimensions cost very different amounts. Common framing lumber is typically the lower-cost choice for concealed structural work. Cedar, redwood, appearance-grade boards, and specialty hardwoods generally cost more, especially when the order requires clear faces, consistent color, or long lengths.
Length is another practical price driver. A 16-foot board may cost more than twice the price of an 8-foot board because of grade availability, handling, and waste. Pressure treatment also adds cost; treatment level should suit the exposure, such as ground contact versus above-ground use.
Compare the exact species, grade, treatment, and length—not just the nominal board size. A quote for 2×6 decking should identify whether it is treated lumber, cedar, or composite, and whether the price is per piece or per linear foot.
Sheet goods vary just as much. Basic sheathing is generally less expensive than sanded plywood, cabinet-grade panels, or specialty subfloor products. Thickness also matters: 1/2-inch panels may be around $25-$60 per sheet, while 3/4-inch structural or finish panels can run approximately $35-$85 or more. Confirm the panel rating and intended use before comparing prices.
Deck size and framing spans can shift material totals
A 200-square-foot ground-level deck may need roughly $1,500-$4,000 in pressure-treated framing and decking materials, excluding labor, permits, and site work. Cedar or composite boards, stairs, railing, and decorative patterns can push the materials total to $4,000-$9,000 or more. The exact takeoff depends on joist spacing, beam layout, waste, and the chosen board profile.
Framing specifications can affect both quantity and unit price. For example, joists spaced 12 inches on center use more lumber than joists spaced 16 inches on center. A beam or header spanning more than 10-12 feet may require engineered lumber or a larger member, adding cost and potentially requiring a plan review. These dimensions are examples, not structural design recommendations.
Use a takeoff based on the approved plan, since span and spacing choices change the order quantity. Add a reasonable waste allowance, often about 5%-10% for straightforward framing and more for angled layouts, extensive cuts, or boards selected for appearance.
Delivery distance and regional supply affect Parr Lumber pricing
Parr Lumber primarily serves communities in Oregon and Washington, where local inventory, transportation, and labor markets influence quotes. Prices can differ between stores even within the same state. Urban areas with higher operating and delivery costs may be about 5%-15% above a comparable rural-market estimate, while remote delivery routes or limited stock can add further charges.
Delivery for a local lumber order may be about $75-$150, while a longer route, oversized load, crane service, or difficult site access can raise the charge to $200-$350 or more. Ask whether the fee covers unloading at the curb, placing material near the work area, or only transporting it to the property. A narrow driveway, steep grade, or overhead obstruction can change what equipment is practical.
Material availability also affects the quote. A store may have common 8-foot studs on hand but need to source longer boards, specialty siding, or engineered products from another yard. That can affect both the unit price and delivery timing. Request the store-specific price and freight charge for the complete list before committing to a project budget.
Three realistic lumber orders and their estimated totals
These examples illustrate how quantities and material choices create different totals. They exclude taxes and installation unless stated, and actual yard prices may be outside the ranges shown.
| Order scenario | Materials estimate | Delivery or extras | Estimated total |
|---|---|---|---|
| Small shed framing: 40 2x4s, 12 sheets of sheathing, connectors | $450-$850 | $75-$175 | $525-$1,025 |
| 200-sq.-ft. treated deck: framing, deck boards, fasteners | $1,500-$3,800 | $100-$250 | $1,600-$4,050 |
| 1,000-sq.-ft. floor sheathing: 32 sheets of 3/4-in. panels and adhesive | $1,200-$2,500 | $100-$300 | $1,300-$2,800 |
The shed example assumes basic construction-grade lumber and a simple shape. The deck estimate assumes pressure-treated framing and decking without extensive railing or stairs. The floor-panel example assumes ordinary structural panels; specialty products, cuts, and engineered floor systems can increase the bill.
Check quantities against the takeoff before treating a sample total as a project quote. Even a small change in panel thickness or deck board species can add hundreds of dollars across a full order.
Where a Parr Lumber order can be trimmed safely
Start by tightening the material list. Match board lengths to the plan to reduce offcuts, but do not substitute shorter pieces where a structural member must span a specified distance. Ask whether a standard length is available before ordering a specialty cut. For sheet goods, plan panel layout to limit waste and keep the correct edge support and rating.
Compare equivalent products by grade, treatment, thickness, and intended application. A lower-priced board is not a savings if it needs replacement sooner or fails to meet the design requirements. For visible decking, compare a standard profile with a premium appearance grade; for concealed framing, avoid paying for cosmetic features that will not be seen.
Combining compatible items into one delivery can reduce repeated freight charges, while a pickup order may avoid delivery expense if a suitable vehicle and safe loading method are available. Ask whether bulk quantities qualify for a different rate, but compare the discount with the cost of unused material and storage.
Preserve the specified structural grade and treatment; cut costs first on avoidable waste, duplicate delivery, and unnecessary finish upgrades. Get at least two written estimates with matching quantities and product descriptions so that the comparison reflects the same lumber rather than different specifications.
When plywood, composite boards, or lumber grades cost more
For structural work, the least expensive suitable framing lumber is often more economical than upgrading every board. Plywood and oriented strand board can both serve as sheathing when the plan allows the selected panel, but thickness, span rating, exposure rating, and edge treatment must match the application. A difference of $10-$25 per sheet adds $320-$800 across a 32-sheet order.
Composite decking usually costs more upfront than pressure-treated boards. At roughly $3-$8 per linear foot for many composite boards versus about $1.50-$4 per linear foot for common treated decking, the material difference can be substantial on a large deck. Composite products may reduce some finishing and upkeep needs, but framing, clips, fascia, and railing still add expense.
Premium cedar or appearance-grade lumber can make sense where color and visible grain matter, but it is not necessarily a cost-effective replacement for concealed framing stock. Compare installed scope and maintenance needs, not only the price per board. A substitute must meet the project’s structural, exposure, and local code requirements.
Questions to ask before accepting a Parr Lumber quote
Ask whether the estimate is based on current stock, how long the quoted price is valid, and whether special-order items can be returned. Lumber may be sold by piece, linear foot, or board foot, so confirm the unit for each line. Check whether quantities include the contractor’s waste allowance and whether cut fees, delivery, unloading, and sales tax are included.
For an installed project, ask who is responsible for permits, inspections, and code-required upgrades. Lumber purchases alone generally do not cover those expenses. Permit charges depend on the local jurisdiction and project scope, and structural changes may require drawings or engineering. Get those items identified separately rather than assuming they are part of the material total.
A useful quote lists exact product specifications, quantities, freight, tax, and exclusions. If two estimates differ significantly, compare species, grade, moisture condition, treatment, panel rating, board length, and delivery terms before assuming one supplier is simply more expensive.