Pete Alewine Pools does not publish a fixed price list, so a project quote depends on the pool design, site, materials, and included equipment. For budgeting, a professionally installed in-ground pool in the Augusta, Georgia area can range from about $45,000 to $110,000 or more, with many standard projects near $70,000-$85,000 before optional landscaping or major site work.
Use these figures as planning estimates, not as a company-issued quote. The final price should specify the pool shell, excavation, filtration equipment, decking, permits, cleanup, and any excluded work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed in-ground pool | $45,000 | $78,000 | $110,000+ | Typical planning range; design and site conditions matter |
| Fiberglass pool package | $45,000 | $65,000 | $90,000+ | Shell, installation, and standard equipment; scope varies |
| Concrete pool | $70,000 | $100,000 | $150,000+ | Custom shape, finish, and structural work affect the total |
| Basic surrounding deck | $8-$15 per sq ft | $15-$25 per sq ft | $30+ per sq ft | Material, access, and preparation change rates |
What a Pete Alewine pool project may cost
For an uncomplicated residential installation, a reasonable starting budget is $45,000-$75,000 for a smaller or standard fiberglass pool with basic equipment and limited decking. A larger pool, upgraded filtration, or more extensive concrete surround can bring a typical total to $75,000-$110,000. Custom concrete designs and complex yards can exceed $150,000.
Those are regional budgeting ranges for comparable pool work, not confirmed Pete Alewine Pools prices. An actual estimate may differ based on the selected model, included features, current labor and material rates, and what the contractor includes in the base package.
Per-square-foot pool pricing is less useful than a complete project quote because excavation, filtration, electrical work, and access are not proportional to water area. As a rough comparison, a finished fiberglass pool project may work out to about $200-$400 per square foot of water surface when the shell, installation, and standard equipment are counted; decking and major extras can raise that figure.
For an initial budget, use $65,000-$90,000 for a standard, fully installed pool with modest decking and ordinary access. Confirm whether the estimate includes taxes, fencing, electrical bonding, start-up chemicals, and final grading before comparing it with another proposal.
How excavation, shell, and equipment appear in the quote
Pool proposals may bundle work into a package, so two totals are not directly comparable unless their inclusions match. The ranges below are illustrative allocations for a midrange residential project; they are not a published Pete Alewine price breakdown. Bundled items can overlap, and difficult sites may shift money from equipment or finishes to labor and excavation.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Pool shell or structure | $20,000-$55,000 | Fiberglass shell or concrete construction | Size, shape, finish, and structural design |
| Excavation and installation labor | $8,000-$22,000 | Project total; often several crew days | Rock, soil, access, groundwater, and haul distance |
| Pump, filter, and plumbing | $4,000-$12,000 | Equipment package | Pool volume, automation, and energy options |
| Electrical and gas work | $2,000-$8,000 | Project total | Panel capacity, wiring distance, and heater choice |
| Decking and coping | $8-$30+ per sq ft | Installed area | Concrete, pavers, finish, drainage, and area size |
| Permits, delivery, and disposal | $500-$5,000 | Combined allowance | Local requirements, delivery access, and spoil removal |
Labor may be included in a package price rather than listed separately. For a separate labor allowance, a broad planning rate is $60-$125 per hour per skilled worker, but it is not a substitute for a fixed project bid.
Ask for a written inclusion list alongside the total. A low quote may exclude the deck, fence, heater, lighting, or soil removal, while a higher quote may include several of those items.
Pool size, shell material, and yard access move the estimate
Size is one of the clearest price drivers. A compact pool around 10 by 20 feet can cost less than a 16 by 32-foot design, but larger dimensions also increase excavation, water volume, plumbing demands, and often decking. A change from roughly 400 to 500 square feet of water surface can add thousands of dollars once the shell, installation, and equipment are considered.
Shell type changes the construction method. Fiberglass pools arrive as a manufactured shell and commonly offer faster installation and a limited set of shapes and dimensions. Concrete pools support more customization, but forming, reinforcing, finishing, and longer construction can push the price substantially higher. A vinyl-liner design may have a lower initial price in some markets, but liner replacement is a future ownership expense.
Site access and soil can cause large, difficult-to-predict adjustments. A machine-accessible backyard with ordinary soil may need little extra preparation; narrow gates, steep slopes, buried utilities, or hard rock may require specialized equipment or additional crew time. Rock removal can add roughly $1,000-$10,000 or more, depending on how much material must be broken and hauled.
Pool capacity and equipment specifications matter as well. A 10,000-gallon pool with a standard pump and filter generally needs less equipment than a 20,000-gallon pool with a heater, automation, and water features. A variable-speed pump or saltwater system may add about $1,000-$4,000 compared with a basic setup, depending on the equipment and installation scope.
Before accepting a size or equipment upgrade, ask for its separate price and operating implications. A larger pool can raise construction and ongoing heating, chemical, and electricity costs.
Augusta-area labor and site conditions affect regional pricing
Pete Alewine Pools is associated with the Augusta, Georgia market, but a customer should verify its current service area and project availability directly. Pool bids in the broader Southeast vary with local labor demand, subcontractor availability, material transport, and municipal requirements. For planning, a similar scope in an urban market with high demand may run about 5%-15% above a less congested nearby market; a rural location can instead cost more if delivery or crew travel is extensive.
Augusta-area soil and yard conditions are particularly relevant to the excavation allowance. A level lot with truck and equipment access is usually simpler than a sloped property requiring retaining work or a tight route through a house or side yard. Drainage and stormwater handling can also affect the quote, especially where a pool changes the way water flows across the property.
Regional comparisons should account for scope, not just the headline total. A contractor may include a larger concrete deck, different equipment, or more site preparation than a competing bid. Compare pool dimensions, shell type, waterline tile, coping, decking square footage, filtration, electrical work, and warranty terms before judging a price difference.
For a fair local comparison, request at least two itemized bids using the same pool dimensions and equipment specifications. A $10,000 difference may reflect omitted work rather than a lower price for equivalent construction.
Which extras can add thousands to a pool installation
Features and site work can expand a base estimate quickly. A pool heater may add about $2,500-$6,000 installed, depending on type and capacity; underwater lights may cost roughly $700-$2,000 per fixture with electrical work. Automation, a salt system, upgraded water features, or a safety cover can add hundreds to several thousand dollars apiece.
Decking is another major variable because the quoted area may be much larger than the water surface. For 500 square feet of basic concrete at $8-$15 per square foot, the allowance is about $4,000-$7,500. Pavers or decorative finishes can take the same area into a $10,000-$15,000 range or higher, particularly when base preparation and drainage are involved.
Fencing should be treated as a separate scope unless the bid clearly includes it. A compliant pool barrier may cost approximately $2,000-$8,000, depending on linear footage, gates, material, and existing fence conditions. Landscaping, sod, retaining walls, and outdoor kitchens are often outside the pool contractor’s base price.
Removal and disposal can add costs when an old pool, shed, large tree, or excess soil must be dealt with. Hauling excavated soil may cost several hundred to several thousand dollars depending on volume and distance. Ask whether the contractor plans to leave clean fill on site or remove it, and whether cleanup and surface restoration are included.
Get prices for optional features separately instead of letting them disappear into a single package total. That makes it easier to choose the items that matter without losing sight of the base construction price.
How long installation takes and when crews can start
Construction time varies by pool type and weather. A fiberglass installation may take roughly 2-6 weeks of on-site work after excavation begins, while a custom concrete pool can require 8-16 weeks or longer for construction, curing, finishes, and inspections. These estimates exclude time spent waiting for permits, design approval, equipment, or a crew opening.
Labor time does not always match calendar time. Excavation, shell placement, plumbing, electrical work, decking, and inspections often involve different crews and scheduled visits. Rain, unexpected rock, a failed inspection, or delayed materials can interrupt the sequence and extend the project without changing the original labor allowance.
Peak-season demand can limit start dates and sometimes affects subcontractor availability. A rush request may not produce a faster build and can involve extra scheduling or delivery charges if the contractor offers expedited work. Ask for a tentative start window, an estimated completion range, and written terms explaining how delays are handled.
Confirm the schedule and payment milestones in the contract. Payments should correspond to stated project stages, such as excavation, shell placement, equipment installation, or completion, rather than an unclear calendar promise.
Three sample pool quotes show what different budgets buy
The examples below illustrate comparable U.S. project scenarios, not actual bids from Pete Alewine Pools. They assume ordinary residential access and no major rock, groundwater, retaining wall, or utility relocation. Actual local proposals can vary based on design and inclusions.
| Example | Specifications | Illustrative price | Included scope |
|---|---|---|---|
| Compact fiberglass | 10 x 20 ft pool; about 400 sq ft basic deck | $52,000-$68,000 | Standard shell, excavation, pump and filter, basic coping |
| Midrange family pool | 16 x 32 ft fiberglass; about 600 sq ft concrete deck | $72,000-$98,000 | Standard equipment, basic lighting, typical installation |
| Custom concrete | 18 x 36 ft; upgraded finish and about 800 sq ft deck | $110,000-$160,000+ | Custom structure, higher-end finish, expanded site work |
A compact example priced at $60,000 could include about $28,000 for the pool package and structure, $12,000 for excavation and installation, $8,000 for deck work, $6,000 for equipment and electrical, and $6,000 for permits, delivery, and finishing allowances. Those are illustrative allocations, not standard line-item rates.
For a midrange project near $85,000, the estimate might allocate $38,000 to shell and structure, $17,000 to labor and excavation, $15,000 to decking, $9,000 to equipment and electrical, and $6,000 to delivery, permits, and cleanup. An upgrade such as a heater or larger deck could push the quote higher.
Use sample totals to test whether a quote is plausible, not to challenge a contractor with a made-up rate. Ask the bidder to explain differences in dimensions, inclusions, and site allowances.
How to lower the quote without sacrificing essential work
Keeping the pool footprint and deck area modest is usually more effective than trimming small accessories. Reducing a planned deck from 800 to 500 square feet could save approximately $2,400-$9,000 or more, depending on material and preparation. A simpler rectangular shape can also reduce custom construction and finish costs compared with a design full of curves, benches, or integrated features.
Choose a package that meets the intended use without paying for unused capacity or automation. A standard pump and filter may be adequate for a small pool, while a larger pool or frequent use can justify upgraded equipment. Ask for the installed price difference, expected energy use, and warranty coverage rather than choosing solely by the equipment label.
Prepare the site only where the contractor agrees it is safe and useful. Clearing loose yard items or arranging access can help, but homeowners should not remove trees, move utilities, or begin excavation without written direction. Uncoordinated work can damage property, delay construction, or complicate insurance and permit responsibilities.
Compare quotes on an identical scope and ask each bidder to price optional work separately. Check whether disposal, fence work, electrical upgrades, grading, and startup are included. If a proposal is far below others, request clarification about exclusions, allowances, and equipment models before signing.
The most reliable savings come from reducing scope and avoiding surprise extras, not from leaving safety or code work out of the plan. Keep a contingency of about 10%-15% of the project budget for unforeseen conditions, particularly on older or difficult-to-access properties.