A Poulan Pro chainsaw typically costs about $150-$350 new when available, with many common 18- to 20-inch gas models falling near $220. Price depends on engine size, bar length, condition, seller, and whether the saw is discontinued or sold as leftover stock; used examples can cost considerably less but may need repairs or parts.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New small or mid-size saw | $150 | $220 | $325 | Typically 14- to 20-inch bar; availability varies |
| New larger gas model | $250 | $325 | $450 | May be leftover inventory or marketplace stock |
| Used working saw | $50 | $125 | $225 | Price depends on age, test results, and included bar |
| Basic chain and setup | $15 | $35 | $70 | Chain, sharpening, or routine setup may be extra |
Typical Poulan Pro chainsaw prices by bar length
For a standard homeowner model, budgeting $180-$300 is a practical starting point. Common Poulan Pro gas saws such as 18-inch and 20-inch models have historically sold in that range, though exact new-model availability can be limited. Retailer listings may reflect closeout stock, marketplace sellers, or older inventory rather than a current manufacturer-wide price.
Smaller saws with bars around 14-16 inches may be priced near $150-$230 when available. They are generally intended for light pruning and smaller wood, not regular cutting of large trunks. An 18-inch model often lands around $180-$275, while a 20-inch model may run roughly $200-$350 depending on engine displacement, seller, and whether accessories are included.
Higher-capacity or less common models can reach $350-$450. A high asking price does not necessarily indicate a premium current model; scarce replacement inventory can raise marketplace prices. Confirm the model number, warranty status, return policy, and whether the saw is truly new before comparing listings.
Assumptions: Gas-powered homeowner saw, standard bar and chain, ordinary retail availability, before sales tax.
What belongs in a Poulan Pro chainsaw quote?
The listed saw price may not cover the supplies and service needed to put it to work. A boxed saw usually includes a bar and chain, but fuel mix, bar oil, protective equipment, assembly, and local sales tax can increase the checkout total. A service shop may charge separately for inspection or setup.
| Quote item | Typical price | What changes the charge | Often included? |
|---|---|---|---|
| Saw, bar, and chain | $150-$350 | Engine size, bar length, seller, stock age | Usually |
| Fuel and bar oil | $15-$35 | Oil quantity and premixed fuel choice | Usually not |
| Replacement chain | $15-$30 | Pitch, gauge, drive links, bar length | One chain generally included |
| Shop setup or inspection | $25-$75 | Assembly, adjustment, test, local labor rate | Seller-dependent |
| Safety equipment | $60-$200 | Helmet, eye and ear protection, chaps, gloves | Not usually |
| Sales tax and delivery | $0-$45+ | Local tax rate and shipping distance | Varies |
Shop labor often falls around $60-$100 per hour, with a minimum charge for small jobs. A basic setup or inspection taking 0.5-1 hour may therefore add about $30-$100, depending on shop minimums and what work is included.
For a saw priced at $220, a chain, oil, and a modest setup charge can bring the initial outlay to roughly $270-$350 before protective gear and tax. Check whether the dealer has already assembled and test-run the unit; paying for duplicate setup is avoidable.
How engine size and bar length shift the price
Engine displacement, bar length, and intended workload are the main specifications behind price differences. A smaller engine paired with a 14- to 16-inch bar generally costs less than a 50cc-class saw with a 20-inch bar. Across listings, moving from a basic 14- to 16-inch unit to an 18- to 20-inch model can add approximately $30-$100, although stock and seller pricing can outweigh the specification difference.
Many familiar Poulan Pro homeowner models are in the 40cc-50cc range. A 42cc-class, 18-inch saw has commonly appeared around $180-$275, while a 50cc-class, 20-inch model may be listed around $200-$350. These are broad purchase ranges, not a guarantee that any particular model is currently produced or in stock.
Bar length should match the work rather than serve as a simple proxy for value. A longer bar requires an appropriate powerhead and chain, and it can make the saw heavier and less convenient. Cutting logs larger than the saw’s practical capacity can increase wear and make work slower; for occasional large trees, rental or professional service may be more economical.
Condition changes the value sharply for older or used saws. A clean exterior does not verify compression, carburetor function, chain brake operation, or oil delivery. A saw that starts cold, idles, accelerates, and oils the chain can justify a higher used price than a non-running example, but repairs can erase the apparent discount.
What can buyers save by choosing used or refurbished?
A working used Poulan Pro often sells for $50-$225, while a non-running unit may be worth only parts value. Prices vary by model, region, season, and seller. An older saw with a sound engine and a serviceable bar can offer a meaningful discount, but buyers should price repairs before treating a low listing as a bargain.
| Condition | Typical asking range | Budget caution |
|---|---|---|
| Non-running or incomplete | $20-$80 | Carburetor, ignition, or engine repairs may exceed value |
| Used, starts and cuts | $50-$225 | Inspect safety features and verify operation under load |
| Refurbished with seller warranty | $100-$275 | Read warranty length and exclusions carefully |
| New-old stock | $180-$400 | Confirm return rights, parts support, and warranty eligibility |
Before buying used, ask for a cold start rather than accepting a warm engine demonstration. Check for fuel leaks, cracked handles, a functioning chain brake, bar oil flow, and smooth throttle response. A compression test by a repair shop may cost about $20-$50, sometimes credited toward later service.
Common repairs are not always inexpensive relative to a low purchase price. Carburetor service can run roughly $50-$120, while a replacement bar and chain may cost $35-$80 together. Engine damage or multiple failed parts can make a different saw the lower-cost option. For any refurbished listing, request a written list of replaced parts and the specific warranty terms.
Regional availability and delivery can change the checkout total
Local stock and shipping can matter as much as the nominal listing price. In areas with many outdoor-power-equipment retailers, buyers may find more opportunities to compare in-person condition and avoid shipping. Rural shoppers may face fewer nearby sellers or a delivery charge, especially for marketplace listings.
As a planning estimate, prices in high-cost metro markets can be about 5%-15% above lower-cost rural markets for comparable new equipment and service. The difference is not universal: clearance inventory or a competing retailer may make an urban purchase cheaper, while scarce older models can command a premium anywhere.
Shipping for a boxed chainsaw may add $15-$50, and some sellers restrict shipment of fuel or require special handling. A local pickup listing can avoid delivery fees, but verify the seller’s return policy and whether the saw has been assembled. Taxes depend on the delivery or purchase location and can add several percent to the final total.
When comparing prices, calculate the delivered, ready-to-use amount rather than comparing headline prices alone. A $190 listing plus $40 shipping and $35 for oil and setup costs $265 before tax; a $225 local offer with setup included may be the less expensive purchase.
How much do setup and routine repairs add?
Basic upkeep usually costs less than a major repair, but neglected fuel and chain maintenance can quickly change ownership costs. A replacement chain commonly costs $15-$30, and professional sharpening may cost about $10-$20 per chain. Bar oil and two-cycle fuel supplies can add $15-$35 at the start, with ongoing use depending on cutting hours.
For occasional homeowner use, allow roughly $30-$100 per year for routine consumables and sharpening, excluding fuel and unexpected repairs. A tune-up or troubleshooting visit often costs $60-$150, depending on labor and parts. Carburetor work, fuel-line replacement, or ignition repairs may push a service bill above $100.
Fuel-related problems are common in equipment that sits for long periods. Using the fuel type and mixture specified in the operator manual, keeping fuel fresh, and following the storage procedure can reduce avoidable service visits. Exact maintenance instructions vary by model, so the manual for the model number should control.
A replacement chain or bar should match the saw’s pitch, gauge, and drive-link count. Buying the wrong specification can waste the purchase and create a safety issue. Check the markings on the existing bar or the manual before ordering parts.
When does repair cost less than replacing the saw?
Compare the complete repair estimate with the price of a comparable working replacement, not with the saw’s original retail price. A $60 repair can be sensible on a sound saw with a good bar and chain. A $150-$250 repair on an older unit may not make sense if a tested replacement is available for a similar amount.
For a saw that only needs a chain, sharpening, or straightforward adjustment, repair is usually the lower initial expense. For no-start problems, request a diagnosis and parts estimate before approving work. If the estimate approaches half the cost of a comparable replacement, consider age, parts availability, safety condition, and the shop’s repair warranty.
Replacement becomes more compelling when the chain brake, engine, and structural components all need attention or when the correct parts are difficult to source. However, a low-price replacement may not include professional setup or a useful warranty. Compare the final ready-to-use price and intended workload, not just the advertised saw price.
Which purchase choices keep the Poulan Pro bill lower?
Matching the saw to the actual cutting job is usually the clearest way to avoid unnecessary spending. Choose a suitable 14- to 18-inch model for light or occasional work instead of paying extra for a longer bar and larger engine that will rarely be used. For large, storm-damaged, or hazardous trees, obtain a professional quote rather than buying a larger saw solely for a one-time task.
Compare at least three offers using the same model number and bar length. Include shipping, tax, setup, chain, return rights, and warranty in each comparison. With older or marketplace inventory, confirm that the model is complete, unused if described as new, and eligible for the stated warranty before paying.
Ask whether a shop’s setup charge includes assembly, chain tension check, brake test, and a run test. Avoid paying twice for services already included. If buying used, negotiate based on verified defects and obtain a repair estimate rather than assuming the seller’s description reflects mechanical condition.
Buying seasonal closeout stock may reduce the equipment price, but only when the seller offers a clear return policy and parts support. Do not economize by skipping eye, ear, leg, and hand protection; those purchases are not optional operating upgrades. Assumptions: Prices are broad U.S. estimates and exclude extraordinary repairs, professional tree work, and local tax unless stated.