A Price Pfister laundry faucet typically costs $50-$180 for the fixture, while a professionally installed replacement usually totals $200-$500 when the existing plumbing is usable. The final price depends on faucet style, supply connections, regional labor rates, and whether old valves, hoses, or wall plumbing need repair.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Pfister laundry faucet | $50 | $100 | $180 | Fixture price; style and finish affect cost |
| Professional replacement | $150 | $275 | $450 | Labor for a straightforward swap |
| Installed total | $200 | $375 | $650 | May include basic connectors and disposal |
| New laundry faucet installation | $300 | $600 | $1,200 | Higher if supply lines or wall plumbing must be added |
What a Pfister Laundry Faucet Costs for a Standard Replacement
For a basic replacement, budget about $200-$500 installed, with an average near $375. That estimate assumes a standard two-handle or utility faucet priced around $50-$150, an accessible laundry sink or wall connection, and no major plumbing changes. A higher-priced model or a difficult removal can push the total toward $650.
Pfister faucets are sold in different configurations, including models for laundry tubs and utility sinks. Fixture prices vary by retailer, finish, handle style, and included accessories. A simple chrome faucet generally costs less than a model with a pull-out spray or a less common finish. Prices can also differ when a model is discounted or sold as a kit with hoses.
For a like-for-like replacement, the faucet itself is only part of the bill. A plumber may charge a minimum service fee even when the actual swap takes less than two hours. If the faucet is purchased separately, confirm that it matches the sink holes or wall-mounted connections before scheduling labor.
Assumptions: Existing faucet connections are accessible, the sink or wall fittings are compatible, and standard replacement parts are sufficient.
How Faucet, Labor, and Connector Charges Shape the Quote
A straightforward quote usually divides into the fixture, labor, and small plumbing supplies. The table gives common U.S. ranges for a replacement using a compatible Pfister faucet. Actual estimates depend on the contractor’s minimum charge and local prices.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Pfister faucet | $50-$75 | $75-$125 | $125-$180 | Standard utility or laundry model |
| Labor | $100-$150 | $150-$250 | $250-$400 | Removal, installation, leak check |
| Supply hoses or adapters | $10-$25 | $25-$50 | $50-$100 | Replacement connectors or fittings |
| Old faucet removal | $0-$25 | $25-$50 | $50-$100 | May be included in labor |
| Disposal and small supplies | $0-$15 | $15-$35 | $35-$75 | Sealant, fasteners, disposal |
Hourly plumbing rates commonly run about $75-$150, but many companies price small jobs as a service call rather than billing each hour. A quote that lists a two-hour minimum can therefore be higher than the time spent turning off water, removing the faucet, and testing the new installation.
Ask whether the quoted labor includes removal, reconnecting supply lines, and checking for leaks. If the estimate lists a separate trip fee, compare the complete installed total rather than the hourly rate alone.
Which Sink Holes, Valve Sizes, and Faucet Styles Raise the Price?
Compatibility and plumbing condition usually matter more than the Pfister name on the box. A faucet designed for a deck-mounted sink may not fit a wall connection, and a mismatch can require adapters or a different fixture. Before buying, check the existing faucet’s mounting arrangement, hole spacing, connection type, and reach over the laundry tub.
A single-hole faucet may fit a compact sink, while a three-hole configuration can need a specific spread or escutcheon. Some laundry tubs use faucets mounted directly to the tub; others have wall-mounted faucets with threaded connections. Adapters may add $10-$50, but unusual or corroded fittings can require more work.
Condition at the connection is another major cost driver. If shutoff valves turn freely and stop water properly, the job is usually simple. If a valve leaks or will not close, replacing it may add roughly $100-$250 per valve, depending on access and whether the pipe connection must be altered. Corroded fittings can add labor even when no new pipe is needed.
Feature upgrades change the fixture budget. A basic chrome model may fall near $50-$100, while a model with a spray attachment, longer spout, or specialty finish may cost $100-$180 or more. Verify that the spout reaches the center of the tub and clears anything mounted behind the sink; selecting a cheaper faucet that does not fit can mean paying for a second installation.
New plumbing is a different project from replacing a faucet. Extending supply lines more than about 3-5 feet, relocating a wall stub-out, or adding a new shutoff can move a job beyond a basic service call. A plumber may need to inspect the route and quote materials and access separately.
How Labor Time Changes for Wall-Mount and Tub-Mount Faucets
Most compatible faucet swaps take about 1-2 hours, but stuck fittings or new connections can extend the visit. A plumber typically shuts off the water, removes the old fixture, cleans the mounting surface, installs the new faucet, reconnects lines, and tests for leaks. For a standard replacement, labor commonly falls around $150-$300 including a service minimum.
A tub-mounted faucet may be straightforward if the underside of the connection is accessible. Tight space behind a laundry tub, a cabinet with limited access, or a faucet secured by rusted nuts can add 30-90 minutes. Wall-mounted fittings may take longer if the faucet is seized or the pipe threads need repair.
When the job involves new supply piping or a moved connection, plan for several hours rather than a quick swap. Access through finished walls can require additional repair work, which is not always included in a plumber’s quote. Request separate pricing for plumbing and wall or cabinet restoration.
Scheduling also affects the minimum charge. A standalone laundry faucet call may cost more per fixture than adding it to a visit for another plumbing repair, because the contractor’s travel and setup expenses are spread across more work.
Regional Laundry Faucet Installation Prices Across the United States
Installed prices in high-cost metro areas can run 15%-35% above typical national estimates. In lower-cost rural and smaller-market areas, a basic replacement may be 10%-20% below the national midpoint, though travel charges can offset the savings. The faucet’s retail price is often similar across regions, while labor and service minimums create most of the difference.
For a standard replacement, homeowners in many small or mid-size markets may see totals around $200-$400. In large coastal cities or expensive metro areas, comparable work may fall around $300-$600. These are broad planning ranges, not fixed regional tariffs; contractor availability, union labor, parking, and access can shift a quote within or beyond them.
Rural customers should ask whether the estimate includes a mileage or trip fee. A plumber traveling a long distance may charge a higher minimum, even if the faucet installation itself takes little time. In dense city neighborhoods, parking or building access can also add a service charge.
Compare at least two written estimates using the same scope: fixture model, removal, connector replacement, disposal, and leak testing. A quote that appears lower may exclude the faucet or assume that existing valves and hoses are reusable.
Three Pfister Faucet Quotes for Common Laundry-Room Jobs
These examples show how fixture price and job scope affect the total more clearly than a single average. They assume ordinary access and typical U.S. labor rates; regional minimums and sales can change the figures.
| Job scenario | Fixture and parts | Labor assumption | Estimated total |
|---|---|---|---|
| Basic tub-mounted swap | $65 faucet + $20 connectors | 1.5 hours at $110 per hour, plus $35 service charge | $285 |
| Spray faucet with worn hoses | $140 faucet + $55 hoses and adapters | 2 hours at $125 per hour | $445 |
| Old faucet and shutoff replacement | $95 faucet + $60 valves and fittings | 3 hours at $135 per hour | $560 |
In the first example, the faucet and connectors total $85, while labor and the call charge account for most of the final bill. In the third, replacing shutoffs adds parts and time, so the quote is no longer comparable to a simple faucet swap. Ask the contractor to identify each added task rather than treating all three projects as the same installation.
If a quote is much higher than these examples, it may include new piping, wall access, premium materials, or a costly service minimum. If it is substantially lower, check whether the price includes the faucet, tax, disposal, and testing.
Extra Charges for Stuck Connections, Valves, and New Supply Lines
Unplanned plumbing repairs can add $50-$400 or more to a basic faucet replacement. A small adapter or pair of supply hoses may cost $10-$50, while replacing shutoff valves can add $100-$250 each when labor is included. New pipe runs, concealed damage, or wall work require a project-specific estimate.
Ask how the plumber handles seized fittings. Some contractors include routine removal in the installation price, but badly corroded hardware may be billed as extra labor. A written quote should state whether the contractor will stop and get approval before replacing a valve or extending a water line.
Water damage or a leaking connection discovered after removal can require repairs beyond faucet installation. The plumber may be able to stop the leak and restore service, but drywall, flooring, or cabinet repairs may be handled by a separate trade. Clarify whether any repair warranty covers the faucet connection only or additional plumbing work.
Permits are uncommon for a direct faucet replacement because it does not change the home’s plumbing layout. They may be required by local rules for larger plumbing alterations, such as moving supply or drain lines. Confirm local requirements if the project goes beyond exchanging the fixture.
Ways to Lower the Installed Price Without Buying the Wrong Faucet
The most reliable savings come from avoiding extra labor and choosing a compatible model before the appointment. Photograph the current faucet, connections, and sink holes, then compare those details with the Pfister product specifications. Correct sizing can prevent a return visit or a second fixture purchase.
Keep the project to a direct replacement when the existing faucet and valves work properly. Do not authorize shutoff replacement solely because it is listed as a possible add-on; ask the plumber to explain any leak, failure, or code concern. Conversely, a valve that cannot shut off safely should not be ignored to preserve a low initial quote.
Buy a standard finish and a model with the needed reach rather than paying for features that will not be used. A simple faucet can cost $50-$100, while specialty finishes or spray options can move the fixture toward $150-$180. Compare the complete kit contents so that missing hoses or adapters do not erase the savings.
Request two or three estimates with the same defined scope and ask whether the contractor offers a lower combined service charge when other plumbing work is scheduled at the same visit. Avoid rushing the appointment unless a leak makes it urgent; emergency or after-hours service can add $100-$300 or more. Keep the old faucet available until the new one is installed and tested, in case a fitting or configuration does not match.