A Price Pfister, now branded Pfister, wall mount faucet typically costs $150-$500 for the faucet and $450-$1,400 installed when compatible plumbing is already in place. The final price depends on the exact model, wall access, faucet spacing, finish, and whether a plumber must change the rough-in or repair the wall.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Pfister wall mount faucet | $150 | $325 | $700 | New models, sets, or less common finishes |
| Replacement labor | $150 | $350 | $700 | Existing compatible connections and accessible plumbing |
| Typical installed project | $450 | $850 | $1,400 | Faucet, basic installation, and minor supplies |
| Rough-in or wall changes | $500 | $1,500 | $4,000+ | Additional plumbing, tile, drywall, or finish work |
What a Pfister wall mount faucet costs to install
For a straightforward replacement, buyers commonly pay $450-$1,000 total, including a faucet priced around $150-$500 and $150-$400 in plumbing labor. The lower end assumes the old faucet can be removed without damage, the new unit matches the existing valve arrangement, and the water lines are in good condition.
A new installation or a change in faucet location can bring the bill to $1,200-$4,000 or more. That range may include opening the wall, setting or relocating supply lines, installing a compatible valve, and patching the wall. Tile repair or a custom finish can add substantially to the project.
Pfister wall-mount products and replacement parts vary by model and availability. A faucet advertised as Pfister may be a current product, older stock, or a used or discontinued item. Buyers should verify the model number, included valve, spout reach, and mounting dimensions before comparing prices.
Assumptions: U.S. pricing, standard faucet finish, one sink, normal access, and no major plumbing or tile repair. A matching existing rough-in is the main condition that keeps installation near the lower end.
How faucet, plumbing labor, and wall repair shape the quote
Quotes can bundle the faucet and installation or list each charge separately. Comparing line items helps show whether a low quote excludes the valve, removal, disposal, or wall finish work. Typical amounts below are broad planning ranges, not fixed national rates.
| Cost item | Low | Average | High | What changes the price |
|---|---|---|---|---|
| Faucet and trim | $150 | $325 | $700 | Model, finish, stock, and included components |
| Plumber labor | $150 | $350 | $700 | Access, corrosion, and time required |
| Valve or supply parts | $25 | $125 | $450 | Replacement stops, adapters, or valve assembly |
| Wall opening and patching | $100 | $400 | $1,200 | Drywall versus tile and repair area |
| Tile or finish restoration | $150 | $600 | $2,000+ | Tile match, area, and specialty labor |
Labor for a basic swap often runs $75-$150 per hour, with a service-call minimum of about $100-$250 in many markets. A job that requires a second trade, such as a tile setter, may have separate mobilization charges.
Ask whether the quote covers the rough-in valve and finished-wall repairs, not just faucet attachment. Those exclusions can make two estimates that look similar differ by hundreds of dollars.
Which spout reach and rough-in dimensions change the price?
Wall-mounted faucets depend on plumbing connections inside the wall, so measurements matter more than they do for many deck-mounted replacements. Common two-handle configurations may use separate hot and cold connections, but spacing and valve requirements depend on the model. Check the manufacturer’s specification sheet rather than assuming an older Pfister faucet uses the same layout as a new one.
Spout reach is another practical cost driver. A reach around 6-8 inches may work for a compact basin, while a 9-12-inch reach may be needed for a wider or deeper sink. If the selected spout misses the basin or splashes against its edge, changing the faucet after installation can mean paying for labor twice.
Moving connections even 6-12 inches can turn a replacement into a rough-in project. Opening an accessible drywall wall may add $200-$700 for plumbing changes and patching; opening tile can raise added work to $500-$2,000 or more, depending on how much must be removed and whether replacement tile is available.
Older homes may have nonstandard spacing, corroded galvanized pipe, or shutoff valves that no longer operate. Replacing a short run of accessible supply piping can add $150-$600, while concealed pipe damage or a valve failure may increase the bill beyond that range.
Confirm center-to-center spacing, valve compatibility, and spout reach before ordering. A faucet that fits the visible holes may still require different concealed plumbing.
How to lower the price without compromising the fit
Keeping the faucet in the same location is usually the largest controllable saving. Reusing sound valves and supply lines can avoid wall opening, extra fittings, and finish restoration. Before authorizing work, ask the plumber to inspect the shutoffs and connections and identify any parts that genuinely need replacement.
Compare at least three written quotes with the same scope. Each should specify the faucet model, labor, valve or adapter parts, removal and disposal, water-line work, and wall repair. A quote that excludes tile restoration may appear cheaper while leaving an important expense out of the budget.
Choosing a readily available finish and a current model can cost less than sourcing a discontinued trim set. If the existing faucet is leaking but its body and valves remain serviceable, a compatible cartridge or seal repair may cost $100-$350 including service, rather than replacing the entire faucet. Parts availability and model age determine whether that repair is practical.
Homeowners can clear access to the sink area and locate the faucet model or purchase paperwork before the appointment. However, concealed plumbing work and pressure testing are generally best left to a licensed plumber; a leak inside the wall can create costly damage.
Control the scope first, then compare product prices. Saving $50 on a faucet is less meaningful than avoiding an unnecessary rough-in relocation or a second service visit.
How plumber rates and job duration affect installation
A plumber may charge $75-$150 per hour, while urban service rates can reach $125-$200 per hour. Some companies quote a flat $200-$500 for a straightforward faucet replacement, particularly when the appointment includes a minimum labor charge. Rates vary with local wages, travel, emergency scheduling, and contractor overhead.
A compatible replacement typically takes 2-4 hours, including removal, installation, connection, and leak testing. Difficult access, seized fittings, or a faucet mounted through tile can stretch the visit to 4-8 hours. A new rough-in may take 1-2 workdays for plumbing, inspection where required, and wall restoration, with separate scheduling for tile or paint.
Ask whether the contractor charges by the hour or by the completed task, and whether diagnostic time is credited toward installation. If work reveals a damaged valve or pipe, the plumber should provide a change-order price before proceeding whenever conditions allow.
Budget for a service minimum even if the faucet swap takes only a few hours. A short job still includes travel, setup, testing, and responsibility for the completed connection.
What regional labor differences mean for a faucet budget
Labor and service-call charges differ widely across the United States. A simple replacement in a lower-cost rural or small-town market may land near $350-$700 installed, while comparable work in a large coastal metro can reach $600-$1,200. These are approximate differences of 15%-40%, not guaranteed regional price lists.
Higher housing costs and dense contractor demand can raise hourly rates in cities such as New York, Boston, San Francisco, and Seattle. Rural areas may have lower hourly labor but higher travel charges or fewer plumbers available, especially for a less common wall-mount model.
Material prices are usually less affected by location than labor, although shipping, local inventory, and expedited delivery can change the faucet price. A special-order finish may take longer to obtain and could cost $50-$200 more than a standard chrome or brushed finish, depending on the seller and model.
Use local written quotes as the deciding benchmark. National averages are useful for screening an estimate, but they cannot account for local travel, labor minimums, or scarce replacement parts.
When a cartridge repair costs less than replacing the faucet
A drip, stiff handle, or inconsistent temperature does not always mean the whole faucet must be replaced. For a repairable model, a cartridge, washer, or seal may cost $10-$100 for parts, with a plumber’s service bringing the usual total to about $100-$350. Older or discontinued faucets may require harder-to-find components, increasing parts cost or making repair impossible.
Full replacement is more reasonable when the faucet body is cracked, the finish is badly deteriorated, parts are unavailable, or repeated repairs have not stopped leaks. A new faucet may also be necessary if the existing rough-in is incompatible with the preferred replacement, though altering the rough-in should be priced separately from the fixture.
Ask the plumber to identify the model and name the failed component before approving a replacement. For an older unit, compare the repair estimate with the $450-$1,000 typical installed cost for a basic compatible replacement. A repair approaching half that total may be less attractive if other parts are also worn.
Repair usually wins when one replaceable part has failed and the rest of the assembly is sound. Replacement offers better value when parts are unavailable or the faucet has multiple defects.
How removal, tile work, and special orders add to the total
Removing a faucet with corroded connections can add $75-$250 in labor, particularly if the plumber must cut or replace fittings. Haul-away is often included in a service quote, but some contractors charge $25-$100 for disposal or additional cleanup. These fees should be shown in writing.
Wall-mounted faucets can leave visible marks or openings when the new trim plate differs from the old one. Drywall patching and painting may add $100-$500; tile repair can add $300-$1,500 or more because matching tile, cutting, waterproofing, and grout work take extra time. Larger decorative or stone surfaces may require a specialist.
Special orders can involve a delivery charge of $15-$75 or expedited shipping of $30-$150. If a model is discontinued, a used fixture may appear cheaper, but missing trim, worn seals, uncertain compatibility, and limited return options can erase the savings. Confirm that the box includes all required mounting and valve components.
Price finish restoration and delivery before committing to a special-order faucet. The fixture’s listed price is not the complete project cost when the wall, parts, or shipping need separate work.
Three Pfister wall faucet quotes for different job scopes
A basic replacement might include a $225 faucet, 2.5 hours of labor at $110 per hour, and $40 in fittings. The estimated total is about $540 before tax or unusual repairs. This scenario assumes matching connections, working shutoffs, and no wall or tile restoration.
A midrange project could use a $350 faucet, 4 hours of labor at $125 per hour, $125 in valve parts, and $250 for a small drywall patch. The total would be about $1,225. This estimate fits a replacement where the plumber finds a worn valve and the wall needs limited repair.
A more complex tile-wall installation might include a $550 faucet, 8 hours of plumbing labor at $150 per hour, $300 in materials, and $900 for tile repair. The estimated total is about $2,950. Relocating pipes, custom tile, or concealed damage could push the quote higher.
| Example scope | Faucet | Labor | Other work | Estimated total |
|---|---|---|---|---|
| Matching replacement | $225 | $275 | $40 | $540 |
| Valve and drywall repair | $350 | $500 | $375 | $1,225 |
| Tile-wall installation | $550 | $1,200 | $1,200 | $2,950 |
These examples exclude major pipe replacement, permit fees, and sales tax, which vary by location and project. A written quote should distinguish planned work from allowances for concealed damage.
The installation scope—not the faucet’s brand name alone—explains most of the spread between these totals. Compare each quote using the same model, dimensions, labor assumptions, and wall-finish responsibility.