A Ravelli RV80 pellet stove may cost about $3,000-$5,000 for the stove when available through a U.S. seller, while a complete installation commonly brings the project to $4,500-$8,000. Final price depends on whether the model is new or used, freight and parts availability, venting requirements, and local installation labor.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| RV80 stove only | $3,000 | $4,000 | $5,000 | Indicative new or dealer-listed price; availability varies |
| Installed project | $4,500 | $6,200 | $8,000 | Stove, standard venting, labor, and typical setup |
| Used stove | $700 | $1,600 | $2,800 | Condition, age, controls, and parts affect value |
| Pellet fuel | $5 | $7 | $10 | Approximate per 40-lb bag, depending on region and season |
Assumptions: U.S. pricing estimates for a freestanding pellet stove, ordinary access, and a standard vent route; the RV80 may not be stocked locally.
What an RV80 stove and complete installation typically cost
The RV80 stove price is not a uniform nationwide retail figure. Ravelli is an Italian manufacturer, and U.S. buyers may encounter limited dealer inventory, special-order sales, used listings, or older units rather than a continuously stocked model. A reasonable planning range for the appliance itself is $3,000-$5,000 before installation, freight, or taxes.
For a straightforward installation, budget roughly $1,500-$3,000 beyond the appliance for vent pipe, fittings, hearth protection if needed, labor, and commissioning. A project total of $4,500-$8,000 allows for common variations, but a long vent run, masonry work, or electrical changes can push the quote higher. Confirm the exact model year, included accessories, and local service support before treating a listing price as the full purchase cost.
Some sellers quote the stove without the exhaust kit, adapter, room thermostat, or delivery. A quote that looks several hundred dollars below another may simply exclude these items. Ask whether the price includes sales tax, curbside or inside delivery, installation, start-up, and warranty registration.
How the vent kit, labor, and delivery shape the invoice
A pellet-stove quote commonly combines the appliance with venting, installation labor, delivery, and setup. The following ranges describe typical U.S. charges for an accessible installation, not a guaranteed RV80 dealer price. Components can differ depending on the stove outlet, approved vent system, and local code.
| Quote item | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Stove | $3,000 | $4,000 | $5,000 | Unit price, when sold as new |
| Pellet vent and fittings | $400 | $750 | $1,300 | Short wall exit to longer or more complex route |
| Installation labor | $600 | $1,100 | $1,900 | About 6-12 hours, depending on access |
| Freight and delivery | $100 | $300 | $700 | Local delivery to special freight handling |
| Hearth and minor materials | $100 | $350 | $900 | Pad, wall protection, sealant, and small supplies |
| Electrical and start-up | $100 | $250 | $500 | Outlet work, inspection, and commissioning as needed |
Labor often falls near $75-$150 per hour, though many installers price by the job. A short, direct vent through an exterior wall usually costs less than a vertical run through a ceiling and roof.
Check the quote line by line: a low appliance price can be offset by an incomplete vent package or high delivery and installation charges. Ask the installer to identify any allowance, such as a provisional amount for roof flashing, hearth construction, or electrical work, and to state how added work will be priced.
Which RV80 specifications and site conditions change the quote?
The stove’s exact configuration matters because units sold under similar names may differ by production year, control system, finish, or regional certification. Ask for the model plate details and the installation manual for that exact unit. A difference in flue connection or included parts can require adapters or a different vent kit, commonly adding $100-$500.
Vent length is a major site variable. A basic wall termination with roughly 3-6 feet of vent may fit the lower installation range. A 10-15-foot vertical route, roof penetration, multiple offsets, or difficult access can add $500-$1,500 or more for pipe, flashing, and labor. The installer must follow the manufacturer’s clearances and venting instructions rather than choose a route only for appearance.
Room layout also affects cost. A stove placed near an exterior wall may need little construction, while a location requiring a new hearth pad, wall shielding, or floor reinforcement can add $200-$1,000. If the destination room lacks a suitable grounded outlet, an electrician may charge another $150-$500 depending on circuit distance and required work.
Availability can be as important as physical specifications. If the RV80 is discontinued or not supported by a nearby dealer, importing it or sourcing a specialty part may add several hundred dollars in freight and delay. Before paying, verify that local technicians can service the control board, igniter, exhaust fan, and combustion components for the specific serial-number range.
How many labor hours does an RV80 installation need?
A standard installation may take one crew of two for about 4-8 hours on site, including moving the appliance, assembling venting, connecting it, and performing a start-up check. Difficult access, a roof exit, or protective construction can extend the job to 1-2 days. The work is not just placing the stove; the vent path and clearances determine the labor plan.
For a basic job, labor may total $600-$1,200. More involved work can reach $1,500-$2,500 when installers must build a chase, cut through a finished wall or roof, relocate an outlet, or remove an old appliance. A site visit is useful when the vent route or hearth requirements are uncertain.
Some companies charge a trip or diagnostic fee of $100-$250, sometimes credited toward installation. Rush scheduling, remote service areas, or a second visit for unavailable parts may add $100-$500. Get the expected crew size, work hours, and return-visit policy in writing when comparing installation bids.
Why RV80 pricing differs between U.S. regions
Local labor, freight distance, and dealer access can shift the total. In major metropolitan areas with several stove installers, labor may be close to the middle of the national range; high-cost coastal markets can run about 10%-25% above it. Rural buyers may face fewer bids and delivery or travel charges that add $150-$600.
Climate also affects demand. In colder states, a fall rush can make scheduling difficult and push installation quotes about 5%-15% above off-season pricing. In milder regions, a dealer may have fewer pellet-stove specialists, making freight and service access more important than the installation rate itself.
These percentages are planning estimates, not location-specific price guarantees. A relatively low labor quote may still produce a higher total if the unit must travel a long distance or the installer has to obtain uncommon Ravelli parts. Compare complete installed bids from contractors who have confirmed RV80 compatibility, not just hourly rates or advertised stove prices.
Is a used RV80 cheaper than buying a new pellet stove?
A used RV80 listed for $700-$2,800 can reduce the initial appliance expense, but the purchase price does not show whether it is ready to operate. Older units may need a replacement igniter, fan, control board, door gasket, or firepot. Repairs can range from about $150 for a minor part to $800 or more when several components and labor are required.
Have the seller demonstrate a cold start, stable feed, exhaust operation, and normal shutdown. Check the serial plate, ownership history, manual, included vent adapters, and visible firebox or heat-exchanger damage. A stove that has been stored outdoors or transported without protection deserves extra inspection. Do not assume a used unit carries a transferable warranty.
A new alternative with similar heating capacity may cost $2,500-$4,500, with more predictable parts access or local service. A premium model can exceed $5,000 before installation. If the RV80 is available only through a distant seller, compare the complete delivered price and support arrangements with a current stove sold by a nearby dealer. Used is a savings only when condition, compatibility, and parts access are verified.
What a quote looks like for three RV80 installation scenarios
Examples help show why the same stove price can lead to different project totals. They assume a stove purchase near $4,000, standard U.S. labor, and no major structural repair. Actual quotes depend on the selected unit, local code, and site inspection.
| Scenario | Scope | Estimated price | What changes the total |
|---|---|---|---|
| Simple exterior-wall install | 6-8 labor hours, 3-6 ft vent, standard hearth | $4,700-$5,800 | Short route and limited finish work |
| Roof-vented installation | 8-12 labor hours, 10-15 ft vent, roof flashing | $5,800-$7,500 | Extra pipe, roof work, and access time |
| Used unit with service work | $1,200-$2,400 stove, 6-10 labor hours, parts allowance | $2,800-$5,500 | Inspection findings and replacement components |
The first scenario is not a promise that any RV80 can vent through a wall; manufacturer instructions and local rules control. The used example excludes major repairs and assumes the stove can be safely installed. Request separate appliance, venting, labor, and repair totals so changes to the scope are easy to price.
Which installation choices can lower the RV80 price?
Choose the stove location before ordering and, where practical, place it near an exterior wall. A shorter approved vent route can reduce both pipe purchases and labor. Avoid planning around an assumed route, however; the installer must confirm clearances, termination location, and the exact RV80 manual requirements.
Ask whether a dealer’s bundle includes the required vent components, delivery, and commissioning. Bundling may reduce separate handling charges, but compare the itemized total against buying components individually. Confirm that the quoted pipe is the correct pellet-vent type and that no required adapter is missing.
Scheduling outside the autumn rush may improve appointment availability and can sometimes reduce labor rates. Clear the work area and provide access before the crew arrives, but leave electrical, vent, and clearance work to qualified professionals. Do not remove safety components or substitute unapproved venting to cut the estimate.
Compare at least two detailed bids using the same scope: model and condition, vent length, hearth work, delivery, commissioning, permits if required, and warranty coverage. If the RV80 needs extensive repair or difficult-to-source parts, compare that total with a locally supported replacement model. The most reliable savings come from a simpler approved vent route, complete bids, and avoiding unneeded construction or upgrades.
Which warranty, permits, and fuel charges belong in the budget?
Permit requirements depend on the city or county and the work involved. A basic appliance installation may require a mechanical or building permit, commonly around $50-$300, while inspection or additional electrical permits can add fees. Ask the installer who obtains permits and whether those charges are included; never assume a dealer’s appliance sale includes local approval.
Warranty coverage can vary by seller, model year, and whether the unit is new, used, or imported. Confirm coverage for parts and labor separately, the term, exclusions, and the process for obtaining service. A seller’s warranty may have limited value if no technician nearby can diagnose the RV80 or obtain its parts. Optional protection plans may cost $200-$600, so compare the exclusions and service limits before adding one.
Pellet fuel is an ongoing expense. A 40-lb bag often costs about $5-$10, with winter delivery or premium fuel pushing the effective price higher. Consumption depends on heat demand, settings, insulation, and run time; a stove burning one bag daily for 120 days would use about 120 bags, or roughly $600-$1,200 at those bag prices, before delivery.
Routine cleaning supplies and annual professional service may add about $150-$350 per year, depending on service rates and how much cleaning the owner performs. Fuel, service, and repairs are separate from the initial purchase and installation estimate. Include permit, warranty, fuel delivery, and annual maintenance terms in the budget rather than comparing stove prices alone.