Real Fyre gas logs typically cost $300-$1,500 for logs alone, while a complete burner-and-log set commonly runs $800-$3,000 before installation. Installed prices often reach $1,500-$5,000, depending on set size, venting, gas-line work, fireplace condition, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Log set only | $300 | $800 | $1,500 | Logs without a burner or controls |
| Burner and log set | $800 | $1,700 | $3,000 | Price varies by size, burner, and ignition |
| Professional installation | $500 | $1,200 | $2,500 | Basic placement through added gas work |
| Installed project | $1,500 | $2,800 | $5,000 | Assumes an existing compatible fireplace |
What a Real Fyre burner and log set usually costs
A typical 18- to 24-inch Real Fyre vented set with ceramic logs, a standard burner, and manual controls costs about $800-$1,800 for the equipment. A 30-inch set, upgraded burner, or electronic ignition commonly brings the equipment total to $1,800-$3,000. Larger or specialty configurations can exceed that range.
Installed pricing for a straightforward replacement is often $1,500-$3,000. A new gas line, shutoff valve, electrical connection, chimney work, or substantial fireplace correction can push a project to $3,000-$5,000 or more. Prices reflect U.S. retail and contractor estimates, not a manufacturer-set national price.
Log-only packages are less expensive, but they are not necessarily compatible with an existing burner. A buyer needs to confirm the burner model, fuel type, log arrangement, and fireplace dimensions before ordering. Assumptions: standard residential fireplace, average U.S. labor rates, sound existing gas connection, and no major code repairs.
For a complete standard installation, budgeting about $2,000-$3,500 is a practical starting point. Quotes substantially below that may exclude controls, delivery, or installation; higher bids should identify the additional work or premium equipment.
How burner, ignition, and installation charges build the quote
Equipment is only one part of the price. The quote may include the log set, burner, gas controls, labor, and smaller charges for delivery or disposal. Check whether the contractor is pricing a complete system or only replacing the decorative logs.
| Quote component | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Ceramic log set | $300-$1,500 | Size, log count, finish, and model | Per set |
| Burner and pan | $350-$1,200 | Burner style, width, and fuel type | Per burner |
| Gas valve and ignition controls | $100-$700 | Manual, millivolt, remote, or electronic controls | Per system |
| Installation labor | $300-$1,000 | Access, removal, testing, and connection work | $75-$150 per hour |
| Gas line or electrical work | $200-$1,200 | Run length, access, and needed capacity | Per project |
| Removal and disposal | $50-$250 | Old equipment and hauling distance | Per job |
Some installers combine these items into one labor charge. Others bill separately for an inspection, leak test, or service call, often $75-$200. Ask for an itemized estimate showing the equipment model and whether the listed price includes a grate, controls, connectors, and tax.
At $75-$150 per hour, a basic 3- to 6-hour replacement may involve $225-$900 in labor; additional gas piping or troubleshooting can add time. Confirm the included equipment and labor in writing before comparing totals.
Why 18-inch and 30-inch sets have different prices
Fireplace opening width is a central price driver. An 18-inch set may cost roughly $800-$1,500 with a basic burner, while a 24-inch setup often lands around $1,000-$2,000. A 30-inch system with upgraded controls or a premium burner can reach $2,000-$3,000 for equipment.
The set must fit the firebox, not just the visible opening. Installers also check depth, height, hearth clearance, and the required space around the burner. A fireplace opening under about 24 inches wide generally limits log-set size; a firebox over 36 inches may call for a wider system or a different burner layout. The exact permitted clearances depend on the product instructions.
Vented and vent-free configurations are not interchangeable. Vented sets generally require an open, properly functioning chimney and are chosen for realistic flames, while vent-free models have different operating and room requirements. Local rules may restrict vent-free appliances, and availability can vary by product line. Changing from one system type to another can require new controls, testing, and code review rather than a simple log swap.
Fuel also matters. A natural-gas burner cannot automatically be used with propane; conversion parts and an approved setup may be required. Measure the firebox and verify fuel and venting compatibility before paying for a set.
How labor hours and gas-line work affect installation
A direct replacement using an existing compatible burner and gas connection may take about 2-4 hours. Installing a full burner-and-log package typically takes 3-6 hours, including positioning, connection, leak testing, and flame adjustment. A difficult removal or inaccessible shutoff can extend the appointment.
New gas piping is often the largest extra labor item. A short, accessible connection might add $200-$500, while a longer route through finished walls, a crawlspace, or an attic can cost $500-$1,200 or more. Electrical ignition may also require an outlet or wiring, commonly adding $150-$500 when no suitable connection is nearby.
Fireplace cleaning or chimney inspection may be priced separately. A basic inspection commonly costs $100-$250, while cleaning or repairs are additional. If the chimney is blocked, damaged, or not appropriate for the selected appliance, the contractor may need to stop work until it is corrected.
Ask whether the quote covers testing the gas connection and verifying safe operation, not just setting the logs in place. A low installation bid that excludes those tasks may not represent the final project cost.
How regional labor rates shift Real Fyre installation quotes
Labor and service-call pricing tend to be higher in dense coastal metros and large cities than in smaller towns. For the same equipment and straightforward replacement, an urban quote may run about 10%-25% above a rural or lower-cost market. Remote locations can also cost more when a contractor must travel or special-order parts.
In lower-cost Midwest and Southern markets, a basic installation may fall near $500-$1,000 in labor and related service charges. In high-cost parts of California, the Northeast, and major metro areas, comparable work may reach $900-$1,800, especially when permits, electrical work, or travel are involved. These are broad comparisons; local rates, not state borders alone, determine the quote.
Equipment prices can vary by retailer, seasonal promotions, shipping, and stock. A specialty dealer may charge more than an online listing but include product selection help or local service. Freight for a heavy burner and logs can add $50-$200, with special handling potentially costing more.
Compare complete, locally installed quotes rather than comparing one retailer’s equipment price with another contractor’s total. Check that each bid includes the same model, controls, delivery, disposal, and warranty terms.
Which extra charges appear beyond the gas log package
Older fireplaces can add costs that are not visible in an online product price. Removing an existing set may cost $50-$250, while cleaning the firebox or chimney may add about $100-$400 depending on debris and access. If the existing burner is corroded or the gas valve does not operate, replacement parts or a new burner can add $150-$800.
Permits and inspections vary by city and project scope. A simple replacement may not require a separate permit in some areas, while a new gas line or appliance installation may. When required, permit fees commonly range from $50-$300, excluding any work needed to meet inspection requirements. A contractor should confirm local rules rather than assume the fee is unnecessary.
Other potential charges include a new shutoff valve, gas connector, hearth protection, masonry correction, or electrical outlet. Together, minor parts may add $50-$300; more involved electrical or masonry work can add several hundred dollars. If an estimate includes an allowance, ask what happens if actual costs are lower or higher.
Have the installer inspect the fireplace and gas connection before finalizing the price. An on-site assessment is more likely to identify access problems, missing components, and code-related work than a quote based only on a product link.
When replacement beats buying Real Fyre logs alone
Buying logs alone can make sense when the existing Real Fyre burner is in good condition and the replacement logs are approved for that exact burner. A log-only set often costs $300-$1,500, potentially saving several hundred dollars compared with buying a complete package. The savings disappear if the burner, valve, or ignition system also needs replacement.
A complete burner-and-log replacement is often more practical when the old burner is rusted, the flame pattern is poor, or parts are unavailable. A new burner and controls can add $450-$1,900 to the log price, but the installer can match the components as a system. Mixing unapproved logs and burners can create unsafe operation and may affect warranty coverage.
Repair may be cheaper for a limited fault. A service call and minor adjustment may total $100-$300; replacing a valve, pilot assembly, or ignition component can bring a repair to $200-$700. If a repair quote approaches half the price of a new compatible system, compare the warranty and condition of the existing burner before deciding.
DIY placement of logs may look simple, but the arrangement affects flame behavior and must follow the model’s instructions. Gas piping, leak testing, and burner setup are better left to a qualified professional. Use log-only pricing only after confirming exact compatibility and burner condition.
Three realistic Real Fyre project totals by fireplace size
These examples show how scope changes the final bill; actual dealer and contractor prices vary. Totals assume an existing fireplace in usable condition and ordinary access. The low and high amounts reflect labor and equipment differences rather than a fixed national rate.
| Example | Equipment | Labor and extras | Estimated total |
|---|---|---|---|
| 18-inch direct replacement | $850-$1,200 | $450-$700 | $1,300-$1,900 |
| 24-inch set with remote control | $1,300-$2,100 | $600-$1,000 | $1,900-$3,100 |
| 30-inch set with new gas line | $1,800-$3,000 | $1,000-$2,000 | $2,800-$5,000 |
For the 18-inch example, a compatible burner and log replacement may need about 3-4 labor hours at $75-$125 per hour. The 24-inch remote-control example can involve 4-6 hours, including control setup. A 30-inch set with new piping may take 6-10 hours across gas and fireplace work, especially if the route is concealed.
Assumptions: equipment includes burner and logs; labor rates are $75-$150 per hour; sales tax, major chimney repairs, and unusual permit work are excluded.
Use these totals as quote checks, then adjust for the exact model and site conditions. If a bid is more than 20%-25% above a comparable example, ask for an explanation of the added labor, controls, piping, or repair scope.
Ways to lower the price without sacrificing a safe fit
Start by choosing a set that fits the existing firebox and gas capacity. Upsizing for appearance can require a different burner, additional gas work, or clearance changes. A standard manual control system usually costs less than a remote or electronic ignition package; select upgrades only when the added convenience is worth the price difference.
Keep a compatible burner if it passes inspection and the replacement logs are explicitly approved for it. Before ordering, give the dealer the burner model, fuel type, firebox measurements, and photographs. This reduces the risk of paying return freight or discovering that the package does not fit.
Request at least three itemized bids with identical equipment specifications. Compare labor hours, service fees, line extensions, removal, permits, and warranty coverage. Scheduling during a contractor’s quieter period may help with availability, but urgent winter work can be harder to book and may carry a higher service charge.
Clear the hearth and provide access before the appointment, and ask whether old equipment disposal is optional. Avoid skipping required inspection or gas testing to save money. The strongest savings usually come from controlling system size and scope, not cutting safety checks.