A Regency fireplace typically costs $2,500-$10,000 for the appliance, while a professionally installed project often totals $5,000-$15,000 or more. Regency fireplace prices vary by model, fuel type, venting, installation complexity, and whether the quote includes finishing work; the figures below are budgeting ranges, not a guaranteed manufacturer price list.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Gas insert appliance | $2,500 | $4,000 | $6,500 | Insert only; model and controls affect price |
| Gas insert installed | $4,500 | $7,500 | $12,000 | Assumes usable masonry fireplace and standard venting |
| Gas built-in fireplace installed | $6,000 | $10,000 | $18,000 | Framing and finish work can raise the total |
| Wood insert installed | $4,000 | $7,000 | $11,000 | Chimney liner and hearth work influence price |
| Electric fireplace installed | $1,500 | $3,500 | $8,000 | Unit and surrounding construction vary widely |
Regency fireplace prices by model and installation scope
Regency sells gas, wood, and electric fireplaces, inserts, and stoves through dealers. A dealer quote may reflect a specific size, trim package, control system, and local installation scope, so there is not one universal retail price list. As a practical starting point, allow $2,500-$6,500 for many gas inserts before installation and $3,000-$8,000 for many gas built-in appliances.
Installed prices commonly fall between $4,500 and $12,000 for an insert or $6,000-$18,000 for a built-in fireplace. High-end models, custom surrounds, new gas lines, complex vent runs, or extensive remodeling can exceed those ranges. An electric unit may cost less to install if the location already has suitable electrical service and needs little construction.
For a straightforward replacement, the appliance is only part of the budget; venting, labor, and finish work can add several thousand dollars.
Assumptions: Typical U.S. dealer pricing, standard-quality options, normal access, and no major structural repairs.
What gas, venting, and finish work add to a Regency quote
Most quotes combine the appliance with installation labor, venting or chimney work, delivery, and finishing. Ask whether the estimate covers tax, permits, gas-line changes, electrical work, removal of the old unit, and the final inspection. These items are often excluded from an appliance-only price.
| Quote component | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| Regency appliance | $2,500-$8,000 | Per unit | Fuel, size, series, controls, and trim |
| Installation labor | $800-$3,000 | $75-$150 per hour | Crew time, access, and scope |
| Venting or chimney liner | $500-$2,500 | Per run or liner | Length, diameter, routing, and condition |
| Surround and finish | $500-$5,000 | Per project | Tile, stone, mantel, framing, and detail |
| Removal and disposal | $150-$800 | Per existing unit | Weight, demolition, and disposal rules |
A gas line extension may add $300-$1,500, depending on distance, pipe size, and access. Electrical changes for a blower or controls can add $150-$700. A basic permit and inspection allowance is often $50-$500, but local requirements differ.
Compare quotes by included work, not just the appliance line; a low unit price can omit costly venting or finishing.
How insert size and vent length shift the final price
Model size and project conditions are major price drivers. A compact insert that fits an existing opening with little modification is usually less expensive than a larger unit that requires masonry changes or a custom surround. Measure the firebox opening, hearth depth, and chimney before comparing model prices; the dealer must confirm fit and clearances.
Venting can create a substantial difference. A straight, accessible chimney suitable for a standard liner is typically cheaper than a damaged or unusually tall chimney requiring repair, a new cap, or special routing. For gas appliances, a long horizontal vent run or multiple elbows may require additional materials and labor. Added venting work can increase a project by $500-$2,500 or more.
For gas models, heat output and efficiency features also affect the appliance price. A unit rated around 20,000-30,000 BTU may suit a smaller room, while a larger space can call for higher output, subject to the home’s layout and climate. The most powerful model is not automatically the best choice; oversizing can lead to uncomfortable heat or frequent cycling.
Finishing is another threshold-sensitive expense. A simple painted surround may add under $1,000, while stone or tile across a 30-50-square-foot wall can add $1,500-$5,000, including materials and labor. Structural framing, a raised hearth, or a mantel built to specific clearances raises the amount further.
Confirm opening dimensions, vent route, and finish area before treating an online model price as a project estimate.
Gas inserts, wood inserts, and built-in units compared
A gas insert is often the least disruptive way to replace an open masonry fireplace. The unit slides into the existing firebox, but it still needs approved venting, gas supply, and installation. A typical installed gas insert budget is $4,500-$12,000. If no gas line is nearby, a line extension adds to the price.
A Regency wood insert may appeal to buyers who already have a usable chimney and want a wood-burning system. Allow roughly $4,000-$11,000 installed for a standard project. A stainless chimney liner, chimney repairs, hearth protection, or a difficult delivery route can move the total toward or above the top of that range.
A built-in gas fireplace is designed for a framed opening rather than an existing masonry firebox. The appliance may cost $3,000-$8,000, with typical completed projects around $6,000-$18,000. Framing, exterior vent termination, wall finishing, and electrical or gas work explain why the total can exceed an insert replacement.
Electric models generally avoid gas piping and combustion venting. A basic installation may total $1,500-$4,000, while a recessed or feature-wall project with custom materials can reach $8,000. Compare the total scope rather than assuming every electric option is inexpensive.
An insert is often the more economical route when the existing fireplace and chimney are sound; a built-in creates a larger construction budget.
Regional labor rates change installed Regency fireplace prices
Labor and permit rates differ across the United States. In lower-cost rural markets, a standard installation may land about 10%-20% below the national midpoint. Large metropolitan areas and high-cost coastal markets may run 15%-30% higher because of contractor rates, parking, access, and code-related work. These are broad comparisons, not fixed regional multipliers.
Local supply also matters. A dealer with common models in stock may quote a shorter schedule and lower delivery charge than one shipping a special-order unit across a long distance. Remote locations can face an added $100-$500 or more for delivery or travel. In dense urban areas, stairs, limited parking, and longer material handling can add labor hours even when the fireplace location is straightforward.
Before comparing regional quotes, check that each proposal specifies the same model, vent kit, surround, warranty terms, disposal, and permit allowance. A quote that omits a required liner or inspection is not directly comparable to a fully installed proposal.
Use local quotes for the final budget, and treat national ranges as a starting point rather than a firm ceiling.
Three Regency fireplace quotes for common home projects
A basic replacement illustrates how an insert can fit a moderate budget. A homeowner replaces a similarly sized gas insert in a sound masonry fireplace, reuses the existing gas connection, and selects a standard surround. The appliance costs $3,500-$4,500, venting and small materials cost $500-$900, and 8-12 labor hours at $90-$130 per hour cost $720-$1,560. With removal and permit fees, a plausible total is $5,000-$7,500.
A wood insert project with chimney work costs more. For a standard-size unit, the appliance may be $3,500-$5,500, a liner and cap $1,000-$2,000, and 10-16 labor hours at $90-$140 per hour $900-$2,240. Adding $300-$800 for removal, hearth adjustments, or inspection yields an estimated $5,700-$10,500 total.
A new built-in gas fireplace with a finished surround is a broader construction job. A midrange appliance might cost $4,000-$6,000, vent and gas work $1,000-$2,500, framing and finish materials $1,500-$4,000, and 20-35 labor hours at $90-$150 per hour $1,800-$5,250. The likely total is about $8,500-$17,500, depending on how much wall work is required.
These examples show why the same appliance category can produce very different installed prices when site work changes.
Removal, permits, and upgrades that can appear after inspection
An installer may find issues that were not visible during an initial phone estimate. A cracked flue, deteriorated masonry, inadequate hearth protection, or a gas shutoff in the wrong location can require added work. Chimney repairs may add $300-$2,000, while extensive masonry restoration can cost more. Request an on-site inspection before relying on a firm total.
Removing an old fireplace or insert typically costs $150-$800 when access is straightforward. Full demolition, hauling heavy masonry, or repairing the wall afterward can raise the charge. Delivery may be included, but special handling or long carry distances can add $100-$500.
Permits and inspections are locally determined. A small appliance replacement may need a limited permit, while a new gas line, new vent termination, or structural change may trigger additional review. Ask the dealer to identify permit responsibility and list any allowance rather than leaving the item unstated.
Keep a 10%-15% contingency for concealed repairs on older fireplaces, especially when chimney condition is uncertain.
Ways to lower the Regency fireplace price without cutting safety
Keep the scope close to the existing installation when it is safe and code-compliant. Reusing a sound opening, gas connection, and finish can avoid framing, masonry, and utility work. However, existing venting should not be reused unless the installer confirms that it is approved for the selected appliance and in suitable condition.
Choose the model based on room size and installation requirements rather than paying for output or decorative features the home does not need. Standard trim, controls, and finishes generally cost less than custom surrounds or upgraded media. Compare a few compatible models with the dealer and confirm that each meets the same clearances and venting needs.
Get at least three itemized quotes. Ask each installer to separate the appliance, venting, labor, finish work, permit, delivery, and removal. This reveals whether a lower estimate excludes work that another contractor included. Scheduling outside the busiest cold-weather period may also improve appointment availability, though savings depend on local demand.
Complete simple, non-technical preparation only when the installer approves it. Clearing furniture and providing access may save handling time. Do not alter gas piping, venting, electrical connections, or firebox components to reduce labor; improper work can create safety hazards and may affect warranty coverage.
The safest savings usually come from controlling finish scope and comparing complete quotes, not removing required venting or inspections.