A used Ridgid TS2400-1 table saw typically sells for about $150-$350, with a practical average near $250; clean examples with a working stand and accessories can cost more. The TS2400-1 is an older, discontinued 10-inch portable saw, so condition, included parts, local availability, and whether it is used or unused matter more than a current retail list price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used saw, tested | $150 | $250 | $350 | Typical local private-sale range |
| Clean saw with stand and accessories | $250 | $350 | $450 | Higher price requires complete, working parts |
| Unused or old-stock unit | $400 | $525 | $650 | Availability is limited; verify condition and return terms |
| Replacement blade | $20 | $35 | $60 | Varies by tooth count and blade quality |
What a Ridgid TS2400-1 Usually Sells For
For a functioning, used TS2400-1, buyers can budget $150-$350 before tax or transportation. Around $250 is a reasonable midpoint for a saw that starts, cuts, and includes its main components. A unit with a sound folding stand, fence, miter gauge, blade guard, and usable blade may justify the upper end. A saw missing essential parts or showing mechanical problems should be priced lower.
Most buyers should treat $200-$300 as a reasonable target for a complete, tested used saw. Prices are local and change with supply: a seller with several interested buyers may hold firm, while an older listing or a unit that needs parts can sell below the typical range.
The TS2400-1 is not a new, regularly stocked model. A listing described as new, unused, or new old stock may ask $400-$650, but that does not mean every unit is worth that amount. Long storage can affect cords, switches, plastic parts, bearings, and included accessories. A high asking price is most defensible when the saw is genuinely unused, complete, clean, and covered by a return option.
Assumptions: U.S. private sale, ordinary used condition, standard 10-inch configuration, and no major repairs needed. Sales tax and pickup or shipping are separate.
How the Fence, Stand, and Blade Change the Quote
For a used tool, the asking price is not a formal parts-and-labor quote, but condition and missing equipment still have direct dollar value. The ranges below are approximate replacement or repair allowances, not guaranteed prices for original Ridgid parts. Used parts may cost less, while discontinued or hard-to-find components can cost more.
| Quote item | Low | Average | High | Price effect |
|---|---|---|---|---|
| Complete fence and rails | $25 | $60 | $120 | Verify smooth locking and alignment |
| Folding stand or stand repair | $30 | $75 | $150 | Depends on completeness and frame condition |
| 10-inch general-purpose blade | $20 | $35 | $60 | New replacement; specialty blades cost more |
| Guard, splitter, or small accessories | $15 | $40 | $90 | Availability varies for older components |
| Motor or electrical troubleshooting | $50 | $125 | $250 | Repair estimate; major faults can exceed this |
A missing fence, unstable stand, or electrical fault can erase the savings from a low asking price. Before agreeing on a price, list what is included and compare the seller’s package with the cost of obtaining usable replacements. Do not assume a generic part will fit without checking the model and mounting points.
When a repair shop is involved, labor charges can add roughly $75-$125 per hour, with diagnostic fees often around $40-$100. A basic inspection or adjustment may take less time than a motor or switch diagnosis, but parts availability can lengthen the repair.
Which TS2400-1 Condition Details Matter Most
Condition drives the price more than cosmetic wear. Scratches and dust are normal for a used shop tool; a bent tabletop, damaged power cord, unreliable switch, or fence that will not lock squarely can point to a safety issue or expensive repair. Ask the seller to demonstrate the saw under power and, if possible, make a short cut in scrap material.
Inspect the tabletop for dents or corrosion that could interfere with feeding stock. Check that the blade raises and tilts smoothly, the fence locks without shifting, and the stand opens and latches securely. A saw that vibrates heavily, makes grinding noises, trips a breaker, or has a burning smell should not be valued like a tested example.
Pay more for evidence of function, not merely a clean photo or a claim that the saw worked last year. If the seller cannot run it, discount the price to reflect uncertainty. Depending on the visible condition and the cost of a return trip, a $50-$100 reduction may be appropriate, or the buyer may choose to walk away.
Confirm the model label actually says TS2400-1. Listings can confuse it with other Ridgid portable saws or include a different saw in a similar-looking stand. Check the blade diameter, fence, guard, miter gauge, and stand as separate items. Photographs of the label and all included parts reduce the risk of paying a complete-tool price for an incomplete package.
How Blade Size and Included Parts Affect Value
The TS2400-1 is a portable 10-inch table saw, and its basic value depends on a working motor, usable table, functional fence, and stable stand. Missing add-ons do not all have equal importance: a replacement blade is relatively inexpensive, while a compatible fence or stand can be harder to source and may determine whether the tool is practical to use.
Check the blade for missing or damaged teeth and confirm that it spins without obvious wobble. A dull blade is a modest bargaining point; a damaged arbor, bent shaft, or unusual blade movement is a more serious mechanical concern. Ask whether the guard and splitter are included, especially if the buyer expects to use the saw with its intended safety equipment.
Value a complete setup as a package, but do not pay a premium for accessories that are worn or unverified. A quality aftermarket 10-inch blade may be preferable to an old included blade, while an original fence that locks consistently can be more valuable than a low-cost replacement. Verify compatibility before assigning a dollar value to parts offered separately.
A complete, tested unit with intact stand and fence commonly belongs around $250-$350 in many local markets. A saw without a stand or with a questionable fence may be closer to $100-$200, depending on whether replacement parts are available nearby. These are buying estimates rather than guaranteed resale values.
Where U.S. Buyers May See Higher Asking Prices
Local supply and transportation affect the final price. In large metro areas, more listings can create competition among sellers, but buyers may also encounter more demand from hobbyists and contractors. In rural areas, fewer listings can mean limited choice and higher asking prices, while pickup distance and fuel can add a meaningful expense.
As a planning estimate, comparable used saws may be about 10%-20% above the midpoint in high-demand urban markets or areas with few listings. A well-supplied suburban market may be close to the typical $200-$300 target. Rural listings can be 10%-20% higher, though sellers may accept less if the buyer handles prompt pickup. These are broad market differences, not fixed regional price rules.
Compare the delivered cost, not just the seller’s number. A $200 saw 60 miles away may cost more in time and fuel than a $260 local unit. Shipping a heavy tool can also raise the total substantially and creates risk of damage to the stand, fence, or tabletop. For most buyers, local inspection and pickup are the more dependable way to assess value.
Use recent listings and completed local sales when possible, rather than treating a high online asking price as evidence of market value. Note the model number, included parts, condition, and pickup location for each comparison. A complete, tested saw is not directly comparable with an untested unit sold as-is.
Should a TS2400-1 Cost More Than Another Used Saw?
The TS2400-1 should be compared with other used 10-inch portable saws in similar condition, not with a new cabinet saw or a bare tool missing its stand. A low-cost replacement saw may offer a current warranty and available parts, while a used Ridgid can make sense when its folding stand and included equipment are complete and the price reflects its age.
For a used portable saw with a stand, a practical comparison budget is about $150-$400 across brands and condition levels. A basic newer portable saw may cost roughly $250-$500 new, depending on features and promotions. A higher-end jobsite saw can cost $500-$900 or more, but its price may include improved fence design, warranty coverage, or greater capacity; it is not a direct equivalent to an older used TS2400-1.
At $350 or more, compare the TS2400-1 against current entry-level saws with warranty support. Add the cost of missing parts and likely repairs before deciding that the older tool is the bargain. If the old saw needs $100 in parts and still has uncertain motor or switch condition, a tested alternative may offer better value even at a higher purchase price.
Repair can be sensible when the issue is limited to an inexpensive blade or a straightforward adjustment. Replacement is easier to justify when the saw has multiple missing safety parts, a damaged tabletop, major electrical trouble, or a stand that cannot be made stable. Obtain a repair estimate before paying a premium for a malfunctioning unit.
What a Realistic Used-Saw Quote Looks Like
These examples show how condition and completeness shape the total. They are illustrative local-sale budgets, not fixed prices. Tax, transport, and any seller fees vary by location, and a private seller may not charge sales tax in the same way as a retailer.
| Example | Purchase price | Added expense | Estimated total | Situation |
|---|---|---|---|---|
| Basic working unit | $175 | $35 blade | $210 | Tested saw with stand; blade is dull |
| Complete, clean package | $285 | $25 local pickup | $310 | Fence, guard, miter gauge, and stand included |
| Low-price, incomplete saw | $125 | $90-$180 parts | $215-$305 | Missing or damaged accessories; compatibility uncertain |
The lowest sticker price may not produce the lowest usable-tool cost. For an incomplete saw, price the required parts first and add a reserve for unknown repairs. If parts cannot be confirmed before purchase, treat the total as uncertain rather than assuming the low estimate will apply.
For a complete unit priced at $285, a buyer should still inspect operation and alignment before paying. A clean appearance does not prove the fence is square or that the motor runs reliably. For an as-is unit at $125, the potential $215-$305 total can approach the value of a tested saw, so the discount needs to compensate for the risk.
How to Negotiate the TS2400-1 Price Without Guesswork
Start with a specific comparison: a complete tested saw in the same area, or a documented replacement cost for a missing part. Point out only verifiable issues, such as a damaged cord, absent guard, bent stand component, or blade wobble. A short list of measurable deductions is more useful than a general claim that an older saw is overpriced.
Set a ceiling based on the usable package. For a standard used unit, a buyer might begin around $200-$250 and reserve $300-$350 for a complete, well-maintained example. These are budget targets, not offers that apply in every market. Lower supply or unusually good condition can justify a different number, but repair uncertainty should reduce the ceiling.
Ask for a powered demonstration before negotiating away the inspection. If the seller cannot test the saw, use an as-is price and avoid paying the same amount as for a working unit. If the saw works but lacks a blade, include a realistic replacement cost of about $20-$60; if a fence or stand is missing, verify that a compatible replacement can actually be sourced.
Pickup timing can help when a seller needs space, but urgency should not replace inspection. Bring enough help and vehicle capacity to transport the saw safely, and confirm whether the stand folds and locks. Avoid shipping costs unless the seller can pack the tool securely and the purchase terms protect against damage or undisclosed missing parts.
For a used TS2400-1, the strongest buying approach is to compare model, condition, completeness, and local alternatives together. A fair price is the cost of a safe, usable saw after parts, pickup, and likely repairs are included.