Roma Moulding prices vary by profile, finish, order size, and whether the moulding is purchased by a trade framer or as a completed frame. As a planning estimate, expect roughly $4-$20 per linear foot for moulding and about $150-$900 for a finished frame, with larger or more elaborate designs costing more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Roma-style moulding, raw | $4 per linear ft | $9 per linear ft | $20 per linear ft | Estimate varies by profile, finish, and dealer pricing |
| 16-by-20-inch finished frame | $150 | $300 | $550 | Frame only; glazing and matting may be extra |
| 24-by-36-inch finished frame | $250 | $500 | $900 | Wide, ornate, or premium finishes raise the total |
| Cutting and assembly labor | $40 | $90 | $180 | Typical single-frame shop charge, excluding materials |
Assumptions: U.S. custom-framing estimates, standard frame dimensions, ordinary access, and no conservation glazing or oversized-art surcharge. These are budgeting ranges, not an official Roma Moulding dealer price list.
What Roma Moulding Profiles Usually Cost Per Foot
Roma Moulding is a brand and product range rather than one standard-priced moulding. Dealers may carry different collections and profile numbers, and many sell finished framing services rather than loose sticks to the public. For budgeting, a simpler profile may fall near $4-$8 per linear foot, a midrange finish around $8-$14, and a detailed or premium profile around $14-$20 or more.
The per-foot figure is a starting point, not the complete frame price. A frame needs four cut sides, corner joining, and often protective glazing, backing, and hardware. Moulding is also sold in lengths that may produce offcuts; the shop’s charge can account for waste, handling, and its minimum order size.
For a standard 16-by-20-inch opening, the perimeter is about 6 feet. A practical order allowance is often 7-8 linear feet after cutting waste and miters. At $9 per foot, the raw moulding allowance is about $63-$72 before assembly, glazing, matting, and markup. A wide profile or complex finish can push the material allowance above $100.
Roma’s dealer quote may not disclose a simple retail price per foot. Trade accounts, collection, geographic location, and shop markup all influence the rate. A consumer comparing quotes should ask whether the moulding price covers the frame assembled to the artwork’s dimensions or refers only to the material.
Which Profile, Finish, and Labor Charges Shape the Quote
Frame quotes usually combine moulding with fabrication and optional components. The table gives broad U.S. planning allowances for one custom frame; it is not a Roma-issued rate card. High-end glazing and specialty restoration work can exceed the listed ranges.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Roma moulding | $30-$160 | About $4-$20 per linear ft; roughly 7-8 ft for a 16-by-20 frame | Profile width, finish, collection, and cut waste |
| Cutting and assembly labor | $40-$180 | About $50-$100 per shop hour or a per-frame charge | Corner detail, size, joinery, and production minimum |
| Glazing and backing | $20-$160 | About $1-$8 per sq ft, depending on material | Basic glass, acrylic, UV filtering, and size |
| Mat and fitting | $20-$120 | About $15-$80 per mat, plus fitting where applicable | Window count, board quality, and art handling |
| Delivery or installation | $0-$150 | Flat fee or local delivery charge | Distance, size, packaging, and wall installation |
For example, 1.25 hours at $75 per hour equals $93.75 in labor before materials and shop charges.
Ask for the moulding, fabrication, glazing, and fitting as separate quote lines. Separating these charges makes it easier to compare two Roma profiles or determine whether a higher total comes from the moulding itself or from glass, matting, and labor.
How Width, Ornament, and Finish Change the Price
Profile width is a major cost driver because wide moulding uses more material and may require stronger construction or extra care during cutting. A profile under 1 inch wide may fit a small, light piece at the lower end of the range. Profiles around 1.5-2.5 inches often cost more per foot and can add roughly $40-$150 to a medium frame compared with a basic narrow option.
Ornate carving, layered edges, metallic finishes, and specialty surfaces can raise the material rate by 25%-100% compared with a simpler profile. A smooth painted or lightly textured design is generally easier to cut and match than a profile with prominent ornament or a finish that shows miter imperfections.
Frame size changes the amount of moulding required. A 16-by-20-inch frame has a perimeter of about 6 feet, while a 24-by-36-inch frame has a perimeter of 10 feet. With cutting allowance, those jobs may need around 7-8 feet and 11-13 feet respectively. At $12 per foot, the larger frame can use roughly $48-$72 more moulding before labor and other materials.
Artwork weight and glazing choice can change the quote independently of the Roma profile. A large frame with acrylic may need special support, while a small valuable print may call for UV-filtering glazing and conservation-grade matting. Confirm that the quote reflects the actual art dimensions, not only the outside frame dimensions.
What Finished Roma Frames Cost at Common Sizes
Finished-frame estimates combine moulding, cutting, assembly, and basic materials. They assume a standard rectangular shape, ordinary glass or acrylic, and no unusually heavy artwork. Matting, premium glazing, installation, and unusually large dimensions can add substantially to the totals.
| Frame size | Low | Average | High | Typical scope |
|---|---|---|---|---|
| 8-by-10 inches | $90 | $175 | $325 | Simple profile, basic glazing, no specialty mat |
| 16-by-20 inches | $150 | $300 | $550 | Midrange profile with basic assembly and glazing |
| 24-by-36 inches | $250 | $500 | $900 | More moulding, larger glazing, added handling |
| Custom oversized frame | $500 | $1,000 | $2,000+ | Special support, acrylic, crating, or installation may apply |
A basic mat can add about $20-$60, while a double mat or premium board may add $50-$120. UV-filtering glass or acrylic can add roughly $30-$150 or more, depending on dimensions. For a fragile or valuable item, the lowest material quote may not provide the protection required.
Size comparisons are most useful when the frame specifications match. Ask each shop to quote the same finished dimensions, profile number or sample, glazing type, mat, backing, and hanging hardware. A quote that excludes the mat or protective glazing can look cheaper while delivering a different finished product.
How Cutting Time and Shop Minimums Affect Small Orders
A single standard frame may take about 30-90 minutes of direct shop work for measuring, cutting, joining, glazing, and fitting. More detailed profiles, multiple mats, oversized panels, or careful handling can extend the job to 2-4 hours. Labor is often built into a package price rather than billed strictly by the hour.
At an estimated shop rate of $50-$100 per hour, a 45-minute fabrication allowance represents about $38-$75 in labor. A highly detailed job taking two hours could represent $100-$200 before materials.
Small jobs may still carry a minimum charge because measuring, setup, and cleanup take time regardless of frame size. A shop might apply a $40-$75 minimum fabrication fee or charge for a minimum moulding length. Ask whether there is a minimum order, and whether unused material remains with the shop or can be purchased by the customer.
Scheduling can affect the quote when a job needs rush production, special ordering, or careful coordination with an artwork delivery. Standard turnaround is often less expensive than expedited work, but exact timing depends on whether the selected profile is in stock. Confirm stock and estimated completion before paying a deposit.
How Dealer and Regional Pricing Changes the Estimate
Roma Moulding is purchased through framing businesses and other dealers, so pricing depends on availability and the shop’s retail structure. Urban shops with higher rent and labor expenses may quote 10%-25% more than a lower-overhead suburban or rural shop for comparable work. Remote locations can also cost more when moulding must be shipped or transferred from another dealer.
Regional differences are not a guaranteed discount. A city shop may have a wider selection and more stock on hand, while a rural shop may face added freight or fewer nearby suppliers. A reasonable comparison is to collect two or three itemized estimates within the same local market rather than treating one national average as a fixed price.
Shipping and handling may add about $20-$100 for a small or moderate moulding order, with oversized or fragile shipments costing more. Completed frames may need protective packaging or local delivery, typically about $25-$150 depending on distance and size. These charges can be especially important for a large frame that cannot be safely shipped by standard parcel service.
When requesting a Roma price, provide the profile name or number, finish, frame dimensions, quantity, and delivery ZIP code. If the shop cannot identify the exact profile from a description, a photo or sample can prevent a quote based on a different design.
Roma Moulding Compared With Standard Stock Frames
A ready-made stock frame can cost about $20-$150 for common sizes, substantially less than a custom Roma frame. Stock frames are economical when the artwork fits a standard opening and the available color and width are acceptable. They may not suit nonstandard art dimensions, a particular finish, or a frame that needs tailored glazing and matting.
Custom Roma framing is more likely to make sense when the profile is central to the finished appearance, the art requires exact sizing, or a shop needs to coordinate materials and fitting. Compared with a basic custom profile, an ornate Roma option may add $50-$250 or more to a medium frame, depending on the collection and the moulding required.
Repair can be cheaper than replacing the entire frame when the moulding is sound. Replacing backing, glazing, hanging hardware, or a damaged corner may cost about $30-$200, while extensive refinishing or rebuilding can approach the price of a new frame. A framer should inspect the corners and profile before quoting repair; a cracked or warped frame may not be economical to restore.
DIY assembly can reduce labor, but precision miters and reliable corner joins require suitable tools and practice. Moulding sold by the length may also require a trade account or minimum purchase. A mistake can waste several feet of material, so DIY savings are greatest when the customer already has the tools and can use spare stock.
Where a Roma Moulding Order Can Save Money
Choose the profile before adding optional upgrades. A simpler Roma design in a narrower width can preserve the brand’s style while reducing material use and cutting complexity. For a standard-size print, matching the frame to the actual opening rather than ordering excess width can also limit waste.
Compare the complete package, not just the per-foot price. Request separate lines for moulding, labor, glazing, matting, backing, and delivery. If two profiles are close in appearance, ask the shop to price both using identical frame dimensions and materials. A quote difference of $50-$150 may come from the finish or width rather than a general labor premium.
Reuse a sound frame when only the glazing, backing, or hardware is outdated. For work that does not require special protection, standard glass may be less expensive than UV-filtering glazing; for valuable art, skipping protection solely to cut the initial price can create greater replacement or restoration expense later.
Plan ahead and avoid rush service, special shipping, and unnecessary installation. Grouping several frames into one shop visit may reduce repeated pickup or delivery charges, though it will not always lower per-frame material pricing. The most controllable savings usually come from choosing a narrower profile, limiting add-ons, and comparing itemized quotes with identical specifications.
Before approving an order, verify the moulding profile and finish, finished outside dimensions, glazing, mat dimensions, hardware, lead time, and any deposit or cancellation terms. Those details help prevent a low initial estimate from becoming a higher final bill.