A Roper washer and dryer pair typically costs about $1,000-$1,600 before delivery, installation, and tax when comparable new units are available; used pairs can cost substantially less. The final price depends on availability, washer capacity, dryer type, condition, and local labor. Because Roper models can be harder to find than other Whirlpool-family laundry appliances, buyers should confirm the exact model and whether a quote covers both machines.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Roper washer | $550 | $700 | $900 | Basic top-load model, if available |
| New Roper dryer | $500 | $650 | $850 | Electric models; gas may cost more to connect |
| New washer and dryer pair | $1,050 | $1,350 | $1,750 | Appliance prices before delivery and tax |
| Used pair | $250 | $550 | $900 | Price depends on age, testing, and warranty |
| Delivery and basic installation | $100 | $175 | $300 | May exclude vent work, gas fitting, or stairs |
Assumptions: U.S. retail or local resale pricing, standard-capacity machines, ordinary access, and no major laundry-room modifications. Actual Roper model availability and local quotes vary.
What a Roper washer and dryer pair usually costs
Plan on roughly $1,050-$1,750 for a new pair before delivery, installation, and sales tax, if the specific Roper models are in stock. A practical midpoint is about $1,350 for two basic machines. Many Roper laundry products are straightforward top-load washers and conventional dryers rather than premium smart or front-load systems, so the price is shaped more by availability, capacity, and fuel type than by high-end features.
An individual new washer commonly falls around $550-$900, while a dryer is often about $500-$850. Those are planning ranges, not guaranteed current shelf prices: Roper stock can be limited, and a retailer may list an older model, a closeout unit, or no new inventory at all. Check the model number, included hoses or cord, and warranty before treating a listing as a firm comparison.
Used sets can be found for about $250-$900, with approximately $550 a common budget target for a working pair in ordinary cosmetic condition. A lower asking price may reflect an older machine, no delivery, missing accessories, or an untested appliance. For used equipment, ask whether the washer completes a full fill, wash, drain, and spin cycle and whether the dryer heats and vents correctly.
Electric dryers generally have simpler hookup requirements where a suitable 240-volt outlet and vent already exist. A gas dryer can carry a higher purchase or connection cost and needs a compatible gas line. Price comparison: new basic pair, about $1,050-$1,750; used pair, about $250-$900, before most setup charges.
What delivery, hookups, and labor add to the quote
Installation is often $100-$300 when the laundry hookups are ready and the machines fit through the access route. The quote can rise if the old appliances must be removed, the dryer vent needs work, the set is carried up stairs, or a gas connection requires a licensed technician. Always separate the appliance price from the total installed price.
| Quote item | Typical range | Unit or condition | What to confirm |
|---|---|---|---|
| Appliances | $1,050-$1,750 | New pair | Exact model numbers and warranty |
| Delivery | $50-$150 | Local delivery | Stairs, distance, and appointment fees |
| Basic hookup labor | $50-$150 | Pair with existing connections | Whether leveling and test cycle are included |
| Washer hoses and fittings | $20-$60 | Set of hoses | Included or charged separately |
| Dryer vent parts or replacement | $15-$100 | Basic materials | Length, material, and vent condition |
| Old-unit removal | $25-$100 | Per pair, often | Haul-away and recycling fees |
| Gas connection work | $100-$300 | Where gas hookup needs service | Local code and technician requirements |
Labor varies with the task and market. Appliance delivery crews may charge a bundled installation fee, while independent technicians commonly bill around $75-$125 per hour. For example, one to two hours at that rate implies $75-$250 in labor before parts or separate service charges.
Confirm that the quote includes disconnecting the old machines, reconnecting the new ones, leveling, and a test run. A standard installation usually assumes working shutoff valves, drain access, an intact vent, and a clear path. New electrical circuits, plumbing repairs, vent rerouting, or a long carry can be priced separately and should be listed rather than left as an open-ended allowance.
How capacity, fuel type, and condition change Roper prices
Capacity, dryer fuel, and the unit’s age can move the budget by hundreds of dollars, especially when comparing new and used listings. A basic washer around 3.5-4.5 cu. ft. is a different purchase from a larger-capacity machine. If a Roper listing gives capacity, compare that figure with the household’s laundry volume rather than assuming that every pair has the same drum size or price.
Washer capacity above roughly 4.5 cu. ft. can push a buyer toward a larger or newer alternative, even if the Roper option is inexpensive. A pair with two machines that do not match in capacity, color, age, or controls can also sell for less than a coordinated set. Model numbers matter: use them to verify dimensions, cycle options, fuel, and parts availability before comparing prices.
Electric and gas dryers are not interchangeable at installation. A gas dryer requires a gas supply and appropriate connection, while an electric dryer typically needs a 240-volt circuit. If the room lacks the right connection, adding it may cost more than the price difference between dryer models. A vent run longer than about 25 ft. equivalent, or one with several bends, can also require a more careful airflow assessment and additional work.
For used appliances, age and demonstrated condition usually matter more than a seller’s description of “like new.” A set more than 8-10 years old may have a lower purchase price but a greater chance of repairs or parts delays. Ask for a recent operating test and disclose any leaks, loud spin cycle, slow drain, burning smell, or inconsistent heat. Useful threshold: price the hookup before choosing gas versus electric if the required connection is not already present.
Can careful scope choices lower the installed pair price?
The most reliable savings come from avoiding unnecessary hookup work and comparing complete quotes, not from choosing an untested machine solely for its low sticker price. Measure the laundry area, doorways, and hall turns before ordering. Confirm the machines’ width, depth, and required clearance so a delivery failure does not create a return charge or rescheduling fee.
Keep the existing washer and dryer connections if they are safe, compatible, and in good condition. Replacing functioning hoses or changing a vent route without a practical need adds expense; however, damaged hoses, unsafe venting, or a leaking valve should not be ignored to save money. Ask the installer to identify any required repair and provide its price separately from optional upgrades.
Compare at least two itemized quotes with the same scope: appliance model, delivery, hookup, haul-away, hoses, tax, and warranty. A lower appliance price can be offset by a delivery fee or mandatory installation package. Ask whether a floor model or closeout unit has full warranty coverage and whether cosmetic marks affect the return policy. For a used pair, request a demonstration and reserve money for transport and possible repairs.
Consider buying a washer or dryer individually if one existing machine still works and the replacement can be matched later. Replacing both at once may simplify delivery, but it is not automatically cheaper. Avoid paying for stacking kits, specialty pedestals, extended coverage, or upgraded vent parts unless the installation or household needs them. Budget control: compare the total delivered and connected price, not just the pair’s advertised price.
Are new Roper models still easy to find?
Availability can be the biggest Roper-specific pricing issue because current local stock may be limited or inconsistent. A buyer may encounter a new unit through a retailer, a closeout listing, or a third-party seller, while nearby stores carry other basic Whirlpool-family models instead. This means the national planning range should not be treated as a guaranteed current Roper retail offer.
Before paying, confirm that the listing is for a new appliance rather than refurbished, open-box, or used equipment. Check the seller’s return window, delivery coverage, manufacturer warranty, and who handles service. A listing with an unusually low price may exclude delivery or have limited geographic availability. If a specific Roper model is unavailable, compare an equivalent basic top-load washer and standard dryer by capacity, dimensions, connection type, and warranty rather than brand name alone.
Model-specific parts and service matter for a used or older Roper set. Ask a local repair shop whether common parts for the model are obtainable and whether diagnostic service is available in the area. A machine priced $100-$200 below a readily serviceable alternative may not be a bargain if repair access is uncertain. These checks do not guarantee future parts availability, but they help put a low purchase price in context.
When a seller quotes a pair price, get both model numbers in writing. Some listings combine unlike machines or use a photo that does not match the inventory. Compare the serial and model labels at delivery with the order confirmation, and note any damage before signing for the appliances.
What three Roper-style quotes look like in practice
These examples show how the same basic pair can have very different totals once condition, delivery, and hookups are included. They use indicative U.S. pricing rather than guaranteed offers for a particular model. Taxes are excluded because rates vary by location.
| Example | Appliance and scope | Added charges | Estimated total |
|---|---|---|---|
| Used local pickup | Tested used pair, $450 | $75 local transport; buyer connects machines | $525 |
| Basic new pair | Washer $700 plus electric dryer $650 | $125 delivery, $100 hookup, $40 hoses | $1,615 |
| New gas-dryer setup | Washer $750 plus gas dryer $750 | $150 delivery, $125 hookup, $200 gas work, $75 haul-away | $2,050 |
The used example assumes the machines operate correctly and fit the room, with no repair allowance. The basic new example assumes existing electrical, water, drain, and vent connections. The gas example includes extra connection work but assumes that the building already has a usable gas supply; running a new line or correcting code issues could raise the quote.
Compare estimates by their included tasks. One seller may quote appliance-only pricing, while another bundles delivery and installation. If the total differs by $150, check whether the difference comes from removal, new hoses, vent materials, a longer carry, or a more comprehensive warranty rather than assuming one quote is simply overpriced.
How local labor and delivery shift the final price
Labor and delivery often cost more in dense, high-cost metro areas than in smaller markets, though availability can reverse that pattern. As a planning estimate, metropolitan delivery and installation may run about 10%-25% above a lower-cost rural or small-city quote. Rural delivery may instead carry a distance surcharge or fewer appointment options, so location alone does not predict the final bill.
Urban buildings can add fees for stairs, elevators, parking restrictions, narrow hallways, or delivery windows. A straightforward ground-floor delivery may remain near $50-$150, while difficult access and removal can push combined delivery charges toward $200-$300 or more. Rural buyers should check the delivery radius and whether the retailer serves the address before placing an order.
Labor rates also vary by region, contractor, and work scope. A simple reconnection may take about 30-60 minutes; a pair installation with removal and adjustments can take 1-2 hours. Gas line work, vent relocation, electrical changes, or plumbing repairs are separate tasks and can require additional visits. Ask whether the quoted hourly rate includes travel, minimum service time, and parts markup.
Get a written estimate that states the delivery address, access conditions, removal plan, and hookup assumptions. If a quote is notably below others, verify that it does not exclude stairs, appliance carry-in, old-unit disposal, or the final test cycle. Planning range: add about $100-$300 for ordinary delivery and setup, then price unusual access or utility work separately.
When repair is cheaper than replacing a Roper pair
A repair can be the lower-cost choice when one machine has a clear, contained fault and the rest of the pair is in dependable condition. A diagnostic visit commonly costs about $75-$150, and a relatively simple repair may bring the total to roughly $150-$350. A major motor, control, transmission, or drum-related repair can reach $400-$700 or more, depending on the model and local parts supply.
Compare the repair estimate with the cost of replacing only the failed unit, not automatically with the price of a complete pair. If a washer repair is $250 and the matching dryer works well, replacing both machines could add more expense than necessary. Conversely, two aging machines with separate problems may justify pricing a new pair, especially if a repair shop cannot source parts promptly.
For a used Roper set, ask a technician for a diagnostic estimate before buying if the seller cannot demonstrate the full cycle. A $300 pair plus a $150 service call and a $400 repair would reach $850 before transport, which may approach the cost of a newer single appliance. Do not assume an inexpensive used pair has a warranty; get the coverage and repair responsibility in writing.
Warranty terms can also change the comparison. A new unit may include limited manufacturer coverage, while used and open-box appliances can have shorter seller coverage or none. Confirm what is covered, the service process, and whether labor is included. Repair threshold: compare the full repair bill and remaining useful life against the delivered price of a replacement machine.